AJ,
that segment looks like this:
# if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest
authentication
# if
(!www_authorize("arialink.com",
"subscriber")) {
#
www_challenge("arialink.com", "0");
# break;
# };
save("location");
break;
};
## native SIP destinations are handled
using our USRLOC DB
if ( method == "INVITE" ) {
if (uri=~"^sip:9742146@.*") {
# attempt handoff to PSTN.
log( "Forwarding to PSTN\n" );
sethost( "x.x.x.x" );
};
}
if (!t_relay()) {
sl_reply_error();
};
# };
--- AJ Grinnell <agrinnell(a)crt.net> wrote:
Do you have an example, I guess im not following
what your saying.
AJ Grinnell
Network Operations Technician
CRT/ Arialink Broadband
1223 Turner Street, Suite A
Lansing, MI 48906
517.346.5041
517.492.1321 direct
-----Original Message-----
From: R Rao [mailto:serdevrao@yahoo.com]
Sent: Tuesday, June 15, 2004 2:48 PM
To: AJ Grinnell
Subject: RE: [Serusers] No outgoing calls
AJ,
I did similar setup sometime back and ran into the
same problem.
I had brought the uri check and rewriteuri out of
the
"if" and I checked for method == "INVITE". It
worked.
I was using another proxy instead of 5350. I am not
sure if my changes would work for you.
-Rao
--- AJ Grinnell <agrinnell(a)crt.net> wrote:
Authentication is working fine now, ngrep is
spitting out way too much, to
the point where it is useless. All I really want
to
do at this point is have
a call going to 9742146 to be forwarded to the
5350.
This is not happening,
i am doing debug all on the 5350 and nothing is
coming accross from the Ser
server.
AJ Grinnell
Network Operations Technician
CRT/ Arialink Broadband
1223 Turner Street, Suite A
Lansing, MI 48906
517.346.5041
517.492.1321 direct
-----Original Message-----
From: Vitaly Nikolaev
[mailto:vitaly@switchgate.com]
Sent: Tuesday, June 15, 2004 1:53 PM
To: AJ Grinnell; serusers(a)lists.iptel.org
Subject: RE: [Serusers] No outgoing calls
Hello
forward(uri:host, uri:port); - you do not need
it...
also commenting auth stuff could help for start.
Later u can enable it.
And use ngrep to see what is going on in the
network
-----Original Message-----
From: serusers-bounces(a)lists.iptel.org
[mailto:serusers-bounces@lists.iptel.org] On
Behalf Of AJ Grinnell
Sent: Tuesday, June 15, 2004 1:39 PM
To: serusers(a)lists.iptel.org
Subject: RE: [Serusers] No outgoing calls
Before i get too far ahead of my self here, will
someone just tell me if
this config will work or not.
# ----------- global configuration parameters
------------------------
debug=4 # debug level (cmd line:
-dddddddddd)
fork=yes
log_stderror=yes # (cmd line: -E)
listen=216.157.192.117
listen=127.0.0.1
alias=216.157.192.117
alias=x.x.x.x
check_via=yes # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
sip_warning=yes
syn_branch=no
server_signature=yes
reply_to_via=no
# ------------------ module loading
----------------------------------
# Uncomment this if you want to use SQL database
loadmodule "/usr/lib/ser/modules/mysql.so"
loadmodule "/etc/lib/ser/modules/sl.so"
loadmodule "/etc/lib/ser/modules/tm.so"
loadmodule "/etc/lib/ser/modules/rr.so"
loadmodule "/etc/lib/ser/modules/maxfwd.so"
loadmodule "/etc/lib/ser/modules/usrloc.so"
loadmodule "/etc/lib/ser/modules/registrar.so"
loadmodule "/etc/lib/ser/modules/auth.so"
loadmodule "/etc/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific
parameters ---------------
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
modparam("usrloc", "db_mode", 2)
modparam("auth_db", "db_url",
"sql://ser:heslo@localhost/ser")
# -- auth params --
modparam("auth_db", "db_url",
"sql://ser:heslo@localhost/ser")
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs
happy
modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic
-------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long
requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many
Hops");
break;
};
if ( msg:len > max_len ) {
sl_send_reply("513", "Message too
big");
break;
};
# we record-route all messages -- to make
sure that
# subsequent messages will go through our
proxy; that's
# particularly good if upstream and
downstream entities
# use different transport protocol
record_route();
# loose-route processing
if (loose_route()) {
t_relay();
break;
};
# if the request is for other domain use
UsrLoc
# (in case, it does not work, use the
following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest
authentication
if
(!www_authorize("asterisk.crt.net",
"subscriber"))
{
www_challenge("asterisk.crt.net", "0");
break;
};
=== message truncated ===
__________________________________
Do you Yahoo!?
Yahoo! Mail - Helps protect you from nasty viruses.