Hi Klaus,
i'll try with AVP.
About my scenario: what I want to do is, when user "sip:djovanovic@srce.hr" is looged in but doesn't answer the call, I want to use his alias "884" which I rewrite with IP address (xxx.xxx.xxx.xxx) of Cisco GW ("sip:884@xxx.xxx.xxx.xxx" ) and GW forward this call to PBX (local number 884).
Thank you for your reply.
davor
Klaus Darilion wrote:
Hi Davor!
Not sure what your scenario is. Usually, the voicemail id will be the "canonical" SIP URI, in my case sip:klaus.darilion@mydomain
I have also aliases like sip:klaus@mydomain which maps to sip:klaus.darilion@mydomain.
If you do it the same way, then the config is fine.
In your case the lookup("aliases") does not hit.
Usually I:
- write the canonical SIP URI (after lookup("aliases") but before
lookup("location") ) into an AVP
- use this AVP in failure route. e.g. set the RURI to this AVP
- to avoid rewriting the domain part (you will loose the domain info,
bad in multi domain setups) push the URI of the voicemail server in the destination URI (avp_pushto, send to voicemal but do net rewrite the request URI)
regards klaus
PS: CC to the list
davor jovanovic wrote:
Hi Klaus,
first of all I want to thank you for your reply. I was on some business trip last two weeks so I wasn't able to thank you for reply and try "revert_uri" function. I try it today but still is the same, I keep getting "not found in usrloc" for user that is in "location" table and for his alias. I can call user by his username and alias so I believe that alias is correctly added to MySQL, but can not rewrite username with alias and forward it to PBX.
I have put ser.cfg and debug log in attachment, and if you be so kind when you find time to make a quick look I would be very grateful. This ser.cfg is my testing configuration and is basic. If I need to provide some more outputs please let me know.
Thank you very much !!!
davor
Klaus Darilion wrote:
The second lookup does not work, as the first lookup changes the request URI. Try revert_uri(); in failure route, just before the lookup().
klaus
On Fri, April 14, 2006 11:29, davor jovanovic said:
Hi all,
I have a problem with using aliases when user doesn't answer the call (408, request timeout). for this I'm using failure_route[1]. After 20sec when user doesn't answer the call, call comes in failure_route and it is recognizes as 408, but when I want to rewrite URI with alias "884" I get "Not found in usrloc", but as you can see from the output of "serctl ul show" user is in both tables (location and aliases). Can somebody help because I don't know what I'm doing wrong.
Thanks a lot
davor
failure_route[1]{ if(t_check_status("408")){ log("LOG:entered failure route 1 on code 408\n"); lookup("aliases"); rewritehostport("161.53.2.235:5060"); t_relay(); } }
1(22439) ->>>>>>>>> T_code=180, new_code=408 1(22439) DEBUG: t_check: msg id=2 global id=2 T start=0x40460708 1(22439) DEBUG: t_check: T already found! 1(22439) DEBUG:t_check_status: checked status is <408> 1(22439) LOG:entered failure route 1 on code 408 1(22439) lookup(): 'djovanovic' Not found in usrloc 1(22439) ERROR: t_forward_nonack: no branched for forwarding 1(22439) ERROR: w_t_relay (failure mode): forwarding failed
serctl ul show
domain: 'location' aor : 'djovanovic'
domain : 'location' aor : 'djovanovic' Contact : 'sip:djovanovic@161.53.0.77:5060' Expires : 429 q : Call-ID : '40C79AFEA5C644ADB6FEA320F247C793@sipgw.srce.hr' CSeq : 52664 ...Record(0x4045e238)... domain: 'aliases' aor : '884' ~~~Contact(0x4045e298)~~~ domain : 'aliases' aor : '884' Contact : 'sip:djovanovic@sipgw.srce.hr' Expires : Permanent q : 1 Call-ID : 'The-Answer-To-The-Ultimate-Question-Of-Life-Universe-And-Everything' _______________________________________________ Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusersHi Klaus,
first of all I want to thank you for your reply. I was on some business trip last two weeks so I wasn't able to thank you for reply and try "revert_uri" function. I try it today but still is the same, I keep getting "not found in usrloc" for user that is in "location" table and for his alias. I can call user by his username and alias so I believe that alias is correctly added to MySQL, but can not rewrite username with alias and forward it to PBX.
I have put ser.cfg and debug log in attachment, and if you be so kind when you find time to make a quick look I would be very grateful. This ser.cfg is my testing configuration and is basic. If I need provide some outputs please let me know.
Thank you very much !!!
davor