Re: [SR-Users] nathelper-module and sdp offer in 200 OK

Hi, We recently had a problem with the nathelper module and rtpproxy in a scenario where the SDP offer is sent only in the 200 OK. We use sip-router 3.1 and rtp-proxy from git master. The sip-router configuration uses the rtpproxy_offer() and rtpproxy_answer() functions in appropriate places. The problem is, that the arguments sent to the rtpproxy, when the ACK with the sdp answer arrives, seems to be not in the order, that rtpproxy expects. On the 200 OK, the nathelper module sends callid, to-tag, from-tag to rtpproxy. On the ACK, the nathelper module sends callid, from-tag, to-tag (with different command prefixes, of course, but I cannot remember them atm). The version of rtpproxy that we are using seems to expect, that the order of arguments sent on the ACK request is the same as on the 200 OK. My question: are there any module parameters, to correct this behaviour? Regards, Emil -- Emil Kroymann VoIP Services Engineer Email: emil.kroymann(a)isaco.de Tel: +49-30-203899885 ISACO GmbH Kurfürstenstraße 79 10787 Berlin Germany Amtsgericht Charlottenburg, HRB 112464B Geschäftsführer: Daniel Frommherz _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users