Are there any error messages in ser logs ?
Jan.
On 07-06 13:14, Rafael J. Risco G.V. wrote:
hello
I?m still having problems with radius accounting module, ...I can see that authentication
process works well but I did not see any "Accounting Report" in
/var/log/radius/radacct/ or neither in radiusd -X debug , please can someone share an
example of its ser.cfg file for this function?
thanks
Rafael
PS: my current ser.cfg configuration is shown below, freeradius it?s installed
in the same host (SuSe Linux 9.0) and I have included setflag(1) for all transactions as
Klaus D. recommend me some days ago...
ser:/var/log/radius/radacct# more /etc/ser/ser.cfg
# simple quick-start config script
#
# ----------- global configuration parameters ------------------------
#debug=3 # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no # (cmd line: -E)
#/* Uncomment these lines to enter debugging mode
debug=9
fork=yes
log_stderror=yes
#*/
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
#port=5060
#children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
#loadmodule "//lib/ser/modules/mysql.so"
loadmodule "//lib/ser/modules/sl.so"
loadmodule "//lib/ser/modules/tm.so"
loadmodule "//lib/ser/modules/rr.so"
loadmodule "//lib/ser/modules/maxfwd.so"
loadmodule "//lib/ser/modules/usrloc.so"
loadmodule "//lib/ser/modules/registrar.so"
loadmodule "//lib/ser/modules/group_radius.so"
#loadmodule "//lib/ser/modules/group.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "//lib/ser/modules/auth.so"
#loadmodule "//lib/ser/modules/auth_db.so"
loadmodule "//lib/ser/modules/auth_radius.so"
loadmodule "//lib/ser/modules/acc.so"
#loadmodule "//lib/ser/modules/uri.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
#modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
modparam("auth_radius","radius_config","/etc/radiusclient/radiusclient.conf")
modparam("auth_radius","service_type",15)
modparam("acc", "log_level", 1)
modparam("acc",
"radius_config","/etc/radiusclient/radiusclient.conf")
modparam("acc", "service_type", 15)
modparam("acc", "radius_flag", 1)
modparam("acc", "radius_missed_flag", 3)
# ------------------------- request routing logic -------------------
# main routing logic
route{
setflag(1);
if (method=="REGISTER")
log(1, "REGISTER message received\n");
if (method=="INVITE")
log(1, "INVITE message received\n");
if (method=="ACK")
log(1, "ACK message received\n");
if (method=="BYE")
log(1, "BYE message received\n");
if (method=="CANCEL")
log(1, "CANCEL message received\n");
if (method=="SUBSCRIBE")
log(1, "SUBSCRIBE message received\n");
if (method=="NOTIFY")
log(1, "NOTIFY message received\n");
if (method=="OPTIONS")
log(1, "OPTIONS message received\n");
if (method=="INFO")
log(1, "INFO message received\n");
if (method=="MESSAGE")
log(1, "MESSAGE message received\n");
if (method=="REFER")
log(1, "REFER message received\n");
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if ( msg:len > max_len ) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
record_route();
# loose-route processing
if (loose_route()) {
t_relay();
break;
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
if (!radius_www_authorize("")) {
www_challenge("", "1");
break;
};
save("location");
break;
};
#Labeled transactions for accounting
#if (method =="INVITE" | method == "BYE")
# {
# log(1,"INVITE or BYE\n");
# setflag(1);
# };
#if (method=="MESSAGE") {
# log(1,"MESSAGE\n");
# setflag(1);
# };
#if (method=="BYE"){
# log (1, "BYEd or CANCEL\n");
# setflag(1);
# };
#if (method=="CANCEL"){
# log (1, "BYEe or CANCEL\n");
# setflag(1);
# };
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
# forward to current uri now; use stateful forwarding; that
# works reliably even if we forward from TCP to UDP
if (!t_relay()) {
sl_reply_error();
};
}
ser:/var/log/radius/radacct #
[Serusers] Still trying to get radius Accounting!!!!!!!!!!
Klaus Darilion <klaus.mailinglists(a)pernau.at> escribi?:
try setflag(1); for the transactions you want to
account!
klaus
Rafael J. Risco G.V. wrote:
hello serusers!
I have followed these instructions carefully
again(http://iptel.org/ser/doc/ser_radius/ser_radius.html) and now I can
see that authentication process works well but I did not see any
"Accounting Report" in /var/log/radius/radacct/ or neither in radiusd -X
debug, please can someone send me an example of ser.cfg configuration
for this purpose?
thanks
Rafael
PS: my current ser.cfg configuration is shown below, freeradius it is
installed in
the same host (SuSe Linux 9.0):
ser:/var/log/radius/radacct # more /etc/ser/ser.cfg
#
# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters
------------------------
#debug=3 # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no # (cmd line: -E)
#/* Uncomment these lines to enter debugging mode
debug=9
fork=yes
log_stderror=yes
#*/
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
#port=5060
#children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading
----------------------------------
# Uncomment this if you want to use SQL database
#loadmodule "//lib/ser/modules/mysql.so"
loadmodule "//lib/ser/modules/sl.so"
loadmodule "//lib/ser/modules/tm.so"
loadmodule "//lib/ser/modules/rr.so"
loadmodule "//lib/ser/modules/maxfwd.so"
loadmodule "//lib/ser/modules/usrloc.so"
loadmodule "//lib/ser/modules/registrar.so"
loadmodule "//lib/ser/modules/group_radius.so"
#loadmodule "//lib/ser/modules/group.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "//lib/ser/modules/auth.so"
#loadmodule "//lib/ser/modules/auth_db.so"
loadmodule "//lib/ser/modules/auth_radius.so"
loadmodule "//lib/ser/modules/acc.so"
#loadmodule "//lib/ser/modules/uri.so"
# ----------------- setting module-specific parameters
---------------
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
#modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this
config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
modparam("auth_radius","radius_config","/etc/radiusclient/radiusclient.conf")
modparam("auth_radius","service_type",15)
modparam("acc",
"radius_config","/etc/radiusclient/radiusclient.conf")
modparam("acc",
"service_type", 15)
modparam("acc", "radius_flag", 1)
modparam("acc", "radius_missed_flag", 3)
# ------------------------- request routing logic
-------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if ( msg:len > max_len ) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
record_route();
# loose-route processing
if (loose_route()) {
t_relay();
break;
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
if (!radius_www_authorize("")) {
www_challenge("", "0");
break;
};
save("location");
break;
};
# native SIP destinations are handled using our USRLOC
DB
if
(!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
# forward to current uri now; use stateful forwarding; that
# works reliably even if we forward from TCP to UDP
if (!t_relay()) {
sl_reply_error();
};
}
ser:/var/log/radius/radacct #
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers