14 May
2020
14 May
'20
7:11 a.m.
Hi ,
Yes I have configured as you mentioned only . In my pcscf only i have
rtpproxy also configured.
Floating IP i have given in listen address also as
listen = 10.40.10.3:4060 advertise 10.45.4.22:4060
10.40.10.3 - private ip
10.45.4.22 - floating ip
Still RTP alone is not coming.
Is it the only way of configuring NAT ?
Thanks.
On Thu, May 14, 2020 at 4:37 PM supreeth herle <herlesupreeth(a)gmail.com>
wrote:
Hello Pavithra,
Have you tried advertising the floating IP of the VM running RTPProxy as
follows?
Edit /etc/default/rtpproxy file as follows:
# Additional options that are passed to the daemon.
EXTRA_OPTS="-l 172.24.15.30 -d DBUG:LOG_LOCAL0"
here, "-l <PUBLIC_IP>"
Hope it helps.
Regards,
Supreeth
On Thu, 14 May 2020 at 13:01, Pavithra Mohanraja <pavimohan3004(a)gmail.com>
wrote:
Hi ,
Could anybody please give me the approach how to configure NAT in
kamailio IMS.
I have installed kamailio IMS in openstack environment which has private
ips for all four vms (each component in one vm). pcscf has one floating IP
attached. I have enabled "WITH_NAT" and configured rtpproxy .
when i make a call from outside of openstack using 2 zoiper clients with
outbound proxy keeping floating ip of pcscf, I am getting 200 ok with all
SIP packets correctly flowing but there is no RTP Packet.
When i try the same within openstack environment without using public ip,
I am getting RTP Packets.
Kindly tell me the procedure of NAT Enablement or do i need to do
anything other than this.
Kindly help because i am stuck with this for long time.
Thanks.
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users