Hi, I did many tests with some combinations and I'm afraid I've a problem here with registration after being disabled 1 - Having modparam("uac", "reg_active", 0) Completely disable the remote registration and can't be overridden any other options trying to enable single registration from the code or from kamcmd.
2 - Having modparam("uac", "reg_active", 1) Remote registration is automatic and sent when kamailio is restarted and all expiration is being handled perfectly. thus dumping reg_dump the flags = 20 ( 16 (2^4) - registration initialized + 4 (2^2) - registration succeeded )
I tried to disable this registration using kamcmd uac.reg_disable l_username XXXXX and it's disabled and confirmed flags: 21 (+ 1 (2^0) - registration profile is disabled )) but my problem here I didn't see unregister going with expiration = 0 to clear the registration from the remote pbx so I used kamcmd uac.reg_unregister l_username XXXXX and message went fine and extension was unregistered. tried again to enable it back using kamcmd uac.reg_enable l_username XXXXXX I see the flags goes to 16 only and no register message is being sent and it's stale like this even by running kamcmd uac.reg_reload
My request is simply I've some entries in the uacreg table. I'd like to start kamailio without remote registration being enabled and have the ability to enable/disable the REGISTER messages from the configuration file.
Can you please advise how to accomplish such scenario ?
On Wed, Apr 13, 2022 at 11:03 AM Henning Westerholt hw@gilawa.com wrote:
Hello,
don’t know without looking to the code, I’d say just give it a try and see if it works.
Cheers,
Henning
--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com
*From:* Ahmed Fouad afouad@gmail.com *Sent:* Wednesday, April 13, 2022 4:42 PM *To:* Henning Westerholt hw@gilawa.com *Cc:* Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org *Subject:* Re: [SR-Users] UAC parameter for enabling and disabling remote registration
Hi,
I've tested this parameter and it's working as expected but I've a question here. When I start kamailio with disabled remote registration mode then from the configuration I use uac_reg_request_to(user, mode) to register only a single extension.
Will this scenario work ?
or the whole remote registration is disabled and needs to be enabled first ?
My goal is to send single registrations only from the code logic, not when kamailio starts.
On Wed, Apr 13, 2022 at 10:16 AM Henning Westerholt hw@gilawa.com wrote:
Hello,
it is present e.g. in 5.5.x, also available in docs: https://kamailio.org/docs/modules/5.5.x/modules/uac.html#uac.p.reg_active
Why do you think it was not merged?
Cheers,
Henning
--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com
*From:* sr-users sr-users-bounces@lists.kamailio.org *On Behalf Of *Ahmed Fouad *Sent:* Wednesday, April 13, 2022 4:11 PM *To:* Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org *Subject:* [SR-Users] UAC parameter for enabling and disabling remote registration
Hi,
I was wondering if this patch was ever merged to the current release(s)
https://github.com/kamailio/kamailio/commit/49f354276df3cfc2cdb0f85b5a1839f8...
I'd like to start Kamailio with all remote registration disabled then enable based on the code logic
Thanks in advance,
--
Best Regards, Ahmed Fouad