Hi Jan,
When I use acc_rad_request I can't login. Rosa.
From: Jan Janak jan@iptel.org To: Rosa De Santis rosadesantis@hotmail.com CC: Subject: Re: [Serusers] Radius accounting Date: Sat, 19 Nov 2005 00:16:08 +0100
Only if a transaction has been created. REGISTERs, for example, do not create transactions.
Try to add acc_rad_request("text"); right after setflag(1). This should log any request.
Jan.
On 18-11-2005 22:27, Rosa De Santis wrote:
Hi again Jan.
The way I have the setflag command does not register all messages for accounting? I mean: register, invite, bye, etc ?
Thanks Rosa.
From: Jan Janak jan@iptel.org To: Rosa De Santis rosadesantis@hotmail.com CC: serusers@lists.iptel.org Subject: Re: [Serusers] Radius accounting Date: Fri, 18 Nov 2005 23:08:16 +0100
Yes, this is what I meant. Could you also post dumps of SIP traffic
that
should have been accounted ?
Jan.
On 18-11-2005 21:50, Rosa De Santis wrote:
Hello. Thanks for your help.
This is my ser.cfg. I set log_flag, log_level and radius_flag to 1, and I don't get
anything
in
syslog. This is what you mean?
Thanks again. Rosa.
debug = 9 fork=no log_stderror=yes
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo"
loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
modparam("usrloc", "db_mode", 2) modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) modparam("acc", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") modparam("acc", "radius_missed_flag", 2) modparam("acc", "radius_flag", 1) modparam("acc", "service_type", 15) modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf")
route{
if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); break; };
setflag(1); if (!method=="REGISTER") record_route();
if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; };
if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; };
if (uri==myself) {
if (method=="REGISTER") { if (!radius_www_authorize("")) { www_challenge("", "0"); break; }; save("location"); break; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; };};
append_hf("P-hint: usrloc applied\r\n"); route(1); }
route[1] { if (!t_relay()) { sl_reply_error(); }; }
From: Jan Janak jan@iptel.org To: Rosa De Santis rosadesantis@hotmail.com CC: serusers@lists.iptel.org Subject: Re: [Serusers] Radius accounting Date: Fri, 18 Nov 2005 21:16:22 +0100
Did you mark the transaction with correct flag ? Try to configure
both
syslog and radius accounting with the same flag and see if you get
any
accounting records in syslog.
Jan.
On 18-11-2005 20:04, Rosa De Santis wrote:
Yes, I set the server IP in authserver and acctserver in the radiusclient.conf file in the radiusclient-ng folder. I also added the server and secret in the servers file in the same
folder.
The strange thing is that i'm making authorization to the same
Radius
server, why accounting is not working?
Thanks Rosa.
>From: Jan Janak jan@iptel.org >To: Rosa De Santis rosadesantis@hotmail.com >CC: serusers@lists.iptel.org >Subject: Re: [Serusers] Radius accounting >Date: Fri, 18 Nov 2005 21:04:26 +0100 > >Did you configure the accounting server in the configuration file
of
>radiusclient-ng ? > >Do you have correct secret for the server ? > > Jan. > >On 18-11-2005 18:25, Rosa De Santis wrote: >> Hello all. >> >> Please, I am trying to make Radius authorization and accounting
using
>SER >> 0.9.3 and radiusclient-ng. I already set all the configuration
as
the
>> ser_radius HowTo. >> Now, I'm making Radius authorization successfully, but not
accounting, I
>> don't get anything going out through port 1813. >> >> The Radius Server is in another machine, i'm configuring only
the
radius
>> client. >> Is there other things to do besides the ser_radius howto?
Please
help...
>> >> Thanks a lot >> Rosa. >> >> >> _______________________________________________ >> Serusers mailing list >> serusers@lists.iptel.org >> http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers