Re: [SR-Users] Questions about LCR module

Thanks Juha I populated the lcr tables by hand. This is how they look now, I have 2 lcr_ids [1 and 2], each instance has its own gw. And each instance has its own prefix to match for [4444 and 5555]. The idea is that a call comes in with R-URI 444413051234567, it should match the lcr_id= 200, then it should go out using gw 192.168.169.200 etc mysql> select * from lcr_gw; +----+--------+------------+-----------------+-------------------+------+--------+------------+-----------+-------+------+-------+---------+ | id | lcr_id | gw_name | ip_addr | hostname | port | params | uri_scheme | transport | strip | tag | flags | defunct | +----+--------+------------+-----------------+-------------------+------+--------+------------+-----------+-------+------+-------+---------+ | 1 | 200 | switchvox | 192.168.169.200 | pbx1.mydomain.com | 5060 | none | 1 | 1 | 0 | | 0 | 0 | | 2 | 201 | switchvox2 | 192.168.169.201 | pbx1.mydomain.net | 5060 | none | 1 | 1 | 0 | | 0 | 0 | +----+--------+------------+-----------------+-------------------+------+--------+------------+-----------+-------+------+-------+---------+ mysql> select * from lcr_rule; +----+--------+--------+----------+---------+---------+ | id | lcr_id | prefix | from_uri | stopper | enabled | +----+--------+--------+----------+---------+---------+ | 1 | 200 | 4444 | | 0 | 1 | | 2 | 201 | 5555 | | 0 | 1 | +----+--------+--------+----------+---------+---------+ mysql> select * from lcr_rule_target; +----+--------+---------+-------+----------+--------+ | id | lcr_id | rule_id | gw_id | priority | weight | +----+--------+---------+-------+----------+--------+ | 1 | 200 | 1 | 1 | 5 | 1 | | 2 | 201 | 2 | 2 | 5 | 1 | +----+--------+---------+-------+----------+--------+ Then I tried the sercmd commands to reload and dump and I do not see the contents o the screen. Is this how is supposed to work now?. How do I know that the new values are being loaded into memory w/o restarting kamailio? I am trying to port our setup from kamailio 1.4.3 to 3.1.4 and I see there is a script somewhere (read wiki) that upgrades the tables. not really. lcr_ids denote independent lcr instances. fifo commands to manipulate lcr tables are not supported by me. -- juha From: fborot(a)hotmail.com To: sr-users(a)lists.sip-router.org Subject: Questions about LCR module Date: Mon, 27 Jun 2011 17:23:05 -0400 I am trying to port our setup from kamailio 1.4.3 to 3.1.4 and I see huge differences on the LCR module. I have these main questions: 1- does lcr_id replaces the grp_id? 2- what happened to the fifo commands to add gws etc: lcr addgw <gw_name> <ip> <port> <scheme> <transport> <grp_id> <flags> <tag> <strip> ............... add a gateway with flags, tag and strip ............ ................(flags, tag, and strip are optional arguments) ..... lcr rmgw <gw_name> .......................................................... ............... delete a gateway lcr addroute <prefix> <from> <grp_id> <prio> ................................. .............. add a route ( use '' to match anything in <from> ) lcr rmroute <prefix> <from> <grp_id> <prio> ................................. .............. delete a route 3- it looks like the kamctl fifo lcr reload can not be used anymore, instead I found that there is a sercmd command that can be used to "show" and "reload" only the lcr tables What would be the best way to use this module on this version? Any help/hint would be greatly appreciated. thank you fborot