10 Aug
2021
10 Aug
'21
9:22 a.m.
Hello,
setting outbound tcpid is facilitating searching first by id, but in
case of failure to find the connection, then it falls back to target
address search.
Cheers,
Daniel
On 09.08.21 16:26, Володимир Іванець wrote:
Hello all!
Does anyone know if function tcp_set_otcpid() can be used in
"event_route[tm:local-request]"? I added this to the configuration:
/$var(conid) = 10;/
/tcp_set_otcpid("$var(conid)");/
... and was expecting that Kamailio will not find a match (there is no
connection id #10 at this point), go
here https://github.com/kamailio/kamailio/blob/master/src/core/tcp_main.c#L1615
<https://github.com/kamailio/kamailio/blob/master/src/core/tcp_main.c#L1615>
and then initiate a new connection
https://github.com/kamailio/kamailio/blob/master/src/core/tcp_main.c#L1993
<https://github.com/kamailio/kamailio/blob/master/src/core/tcp_main.c#L1993>.
But it went
to https://github.com/kamailio/kamailio/blob/master/src/core/tcp_main.c#L1594
<https://github.com/kamailio/kamailio/blob/master/src/core/tcp_main.c#L1594>
and could find a match:
/Aug 9 17:08:31 kamailio-dev-2 /usr/sbin/kamailio[3858]: DEBUG:
<core> [core/tcp_main.c:1610]: _tcpconn_find(): found connection
by peer address (id: 2)/
Thanks a lot!
Regards, Volodymyr Ivanets.
пт, 6 серп. 2021 о 15:53 Володимир Іванець <volodyaivanets(a)gmail.com
<mailto:volodyaivanets@gmail.com>> пише:
Or maybe some special "id" to tell Kamailio to skip the
verification and just create a new connection? Then I could use
the real "id" for further outbound traffic.
Thank you!
Regards, Volodymyr Ivanets.
пт, 6 серп. 2021 о 15:45 Володимир Іванець
<volodyaivanets(a)gmail.com <mailto:volodyaivanets@gmail.com>> пише:
Hello Daniel!
Thank you for the suggestion. Unfortunately adding the
"tcp_connection_match=1" did not made a difference. Kamailio
found other connection to the same peer and used it instead:
/<core> [core/tcp_main.c:1610]: _tcpconn_find(): found
connection by peer address (id: 2)/
/
/
Also, it looks like the answer is in this comment:
https://github.com/kamailio/kamailio/blob/master/src/core/tcp_main.c#L1563
<https://github.com/kamailio/kamailio/blob/master/src/core/tcp_main.c#L1563>.
And below are active tls connections for the previous trunk.
Is there a way to add an additional field like a "tag" that
could be used in peer matching as well? Otherwise, I guess the
only option I have is to run separate instances of Kamailio
with a very basic configuration for each MS Teams connection.
/# kamcmd tls.list
{
id: 2
timeout: 0
src_ip: 52.114.75.24
src_port: 5061
dst_ip: 172.16.30.206
*dst_port: 0*
cipher: ECDHE-RSA-AES256-GCM-SHA384 TLSv1.2
Kx=ECDH Au=RSA Enc=AESGCM(256) Mac=AEAD
ct_wq_size: 0
enc_rd_buf: 0
flags: 2
state: established
}
{
id: 3
timeout: 0
src_ip: 52.114.75.24
src_port: 6272
dst_ip: 172.16.30.206
dst_port: 5063
cipher: AES256-GCM-SHA384 TLSv1.2 Kx=RSA
Au=RSA Enc=AESGCM(256) Mac=AEAD
ct_wq_size: 0
enc_rd_buf: 0
flags: 2
state: established
}
{
id: 4
timeout: 581
src_ip: 52.114.75.24
src_port: 6273
dst_ip: 172.16.30.206
dst_port: 5063
cipher: AES256-GCM-SHA384 TLSv1.2 Kx=RSA
Au=RSA Enc=AESGCM(256) Mac=AEAD
ct_wq_size: 0
enc_rd_buf: 0
flags: 2
state: established/
/} /
/
/
Thank you!
Regards, Volodymyr Ivanets.
ср, 4 серп. 2021 о 13:45 Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> пише:
Hello,
can you set
https://www.kamailio.org/wiki/cookbooks/5.5.x/core#tcp_connection_match
<https://www.kamailio.org/wiki/cookbooks/5.5.x/core#tcp_connection_match>
?
It may work only for connections accepted by Kamailio, but
worth a try.
Cheers,
Daniel
On 03.08.21 14:48, Володимир Іванець wrote:
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Hello Daniel,
Yes, I have "socket=tls:172.16.30.206:5062
<http://172.16.30.206:5062>" and
"socket=tls:172.16.30.206:5063
<http://172.16.30.206:5063>" attributes for corresponding
records in the Dispatcher configuration table. $fs prints
out correct values in the "event_route[tm:local-request]".
But I thought that TCP/TLS connections are established
from a random port to a destination port on the peer
side. And then the remote peer connects from its random
port to our port 5062/5063.
If understood Kamailio log correctly when it is about to
establish a second connection to the same peer it sees an
active connection for the previous trunk and uses it
instead of creating a new one.
Thank you!
Regards, Volodymyr Ivanets.
пн, 2 серп. 2021 о 22:21 Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> пише:
Hello,
do you force local send socket?
Cheers,
Daniel
On 02.08.21 18:21, Володимир Іванець wrote:
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Hello Daniel!
I updated Kamailio to the latest released version.
The problem is that still with
tls_set_connect_server_id() I can not make a single
instance of Kamailio connect to multiple MS Teams
domains. I use a single IP address with different
ports for different trunks. I can see it
establishing a connection to one trunk and using it
for other domains.
Is there a way to force Kamailio to make a new TLS
connection to the same peer address that it is
already connected to?
Thank you!
Regards, Volodymyr Ivanets.
пн, 2 серп. 2021 о 13:44 Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> пише:
Hello,
upgrading is the recommended way, indeed, if you
want to use tls_set_connect_server_id(). For
older version you may want to try looping back
to kamailio (can be over udp) and the use the
xavps. Adds some overhead and hops, but if you
are stuck to a version and can't really upgrade
soon, might be an option to look at.
Cheers,
Daniel
On 29.07.21 18:48, Володимир Іванець wrote:
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Hello Rob!
Yes, I'm using Letsencrypt while I'm testing.
But I would like to be able to use different
certificates with different sockets.
I found this
discussion https://github.com/kamailio/kamailio/issues/2413
<https://github.com/kamailio/kamailio/issues/2413>.
Looks like I need to use
"tls_set_connect_server_id()" instead of
setting $xavp(tls=>server_name)" and
"$xavp(tls[0]=>server_id)". Unfortunately I'm
currently using Kamailio v5.4 on my test system
and this function is not available. I will
update Kamailio and give it another try. Then I
will update everyone in the hope it will be
useful for someone :)
Thank you!
Regards, Volodymyr Ivanets
чт, 29 лип. 2021 о 19:07 Rob van den Bulk
<rob.van.den.bulk(a)gmail.com
<mailto:rob.van.den.bulk@gmail.com>> пише:
Hello, are u using letsencrypt?
U can use a multi domain.
Muti domain names in one certificate
Outlook voor Android
<https://aka.ms/AAb9ysg> downloaden
------------------------------------------------------------------------
*From:* sr-users
<sr-users-bounces(a)lists.kamailio.org
<mailto:sr-users-bounces@lists.kamailio.org>>
on behalf of Володимир Іванець
<volodyaivanets(a)gmail.com
<mailto:volodyaivanets@gmail.com>>
*Sent:* Thursday, July 29, 2021 4:44:16 PM
*To:* Kamailio (SER) - Users Mailing List
<sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>
*Subject:* [SR-Users] Integration with
multiple MS Teams instances
Hello all!
I was able to connect Kamailio with MS
Teams and now trying to add one more Teams
instance. It looks like I have some
misconfiguration or there is a bug.
My test server has 2 domain records
pointing at it (kamailio.domain1.com
<http://kamailio.domain1.com> and
kamailio.domain2.com
<http://kamailio.domain2.com>). My tls.cfg
configuration file looks like this. As you
can see the Default section is configured
with a kamailio.domain1.com
<http://kamailio.domain1.com> sertificate:
/[server:default]/
/method = TLSv1.0+/
/require_certificate = no/
/verify_certificate = no/
/private_key =
/var/kamailio/certificates/kamailio.domain1.com/server/key.pem
<http://kamailio.domain1.com/server/key.pem>/
/certificate =
/var/kamailio/certificates/kamailio.domain1.com/server/cert.pem
<http://kamailio.domain1.com/server/cert.pem>/
/ca_list =
/var/kamailio/certificates/kamailio.domain1.com/CA/cert.pem
<http://kamailio.domain1.com/CA/cert.pem>/
/
/
/[client:default]/
/method = TLSv1.0+/
/require_certificate = no/
/verify_certificate = no/
/private_key =
/var/kamailio/certificates/kamailio.domain1.com/server/key.pem
<http://kamailio.domain1.com/server/key.pem>/
/certificate =
/var/kamailio/certificates/kamailio.domain1.com/server/cert.pem
<http://kamailio.domain1.com/server/cert.pem>/
/ca_list =
/var/kamailio/certificates/kamailio.domain1.com/CA/cert.pem
<http://kamailio.domain1.com/CA/cert.pem>/
/
/
/
/
/[server:172.16.30.206:5062
<http://172.16.30.206:5062>]/
/method = TLSv1.0+/
/require_certificate = no/
/verify_certificate = no/
/private_key =
/var/kamailio/certificates/kamailio.domain1.com/server/key.pem
<http://kamailio.domain1.com/server/key.pem>/
/certificate =
/var/kamailio/certificates/kamailio.domain1.com/server/cert.pem
<http://kamailio.domain1.com/server/cert.pem>/
/ca_list =
/var/kamailio/certificates/kamailio.domain1.com/CA/cert.pem
<http://kamailio.domain1.com/CA/cert.pem>/
/server_name = "kamailio.domain1.com
<http://kamailio.domain1.com>"/
/server_id = "//"kamailio.domain1.com
<http://kamailio.domain1.com>"//
/
/
/
/[client:172.16.30.206:5062
<http://172.16.30.206:5062>]/
/method = TLSv1.0+/
/require_certificate = no/
/verify_certificate = no/
/private_key =
/var/kamailio/certificates/kamailio.domain1.com/server/key.pem
<http://kamailio.domain1.com/server/key.pem>/
/certificate =
/var/kamailio/certificates/kamailio.domain1.com/server/cert.pem
<http://kamailio.domain1.com/server/cert.pem>/
/ca_list =
/var/kamailio/certificates/kamailio.domain1.com/CA/cert.pem
<http://kamailio.domain1.com/CA/cert.pem>/
/
/
/[server:172.16.30.206:5063
<http://172.16.30.206:5063>]/
/method = TLSv1.0+/
/require_certificate = no/
/verify_certificate = no/
/private_key =
/var/kamailio/certificates/kamailio.domain2.com/server/key.pem
<http://kamailio.domain2.com/server/key.pem>/
/certificate =
/var/kamailio/certificates/kamailio.domain2.com/server/cert.pem
<http://kamailio.domain2.com/server/cert.pem>/
/ca_list =
/var/kamailio/certificates/kamailio.domain2.com/CA/cert.pem
<http://kamailio.domain2.com/CA/cert.pem>/
/server_name = "kamailio.domain2.com
<http://kamailio.domain2.com>"/
/server_id = "//"kamailio.domain2.com
<http://kamailio.domain2.com>"/
/
/
/[client:172.16.30.206:5063
<http://172.16.30.206:5063>]/
/method = TLSv1.0+/
/require_certificate = no/
/verify_certificate = no/
/private_key =
/var/kamailio/certificates/kamailio.domain2.com/server/key.pem
<http://kamailio.domain2.com/server/key.pem>/
/certificate =
/var/kamailio/certificates/kamailio.domain2.com/server/cert.pem
<http://kamailio.domain2.com/server/cert.pem>/
/ca_list =
/var/kamailio/certificates/kamailio.domain2.com/CA/cert.pem
<http://kamailio.domain2.com/CA/cert.pem>/
The dispatcher configuration table looks
like this:
+----+-------+----------------------------------------------+-------+----------+--------------------------------------------------------------------+-------------+
| id | setid | destination
| flags | priority
| attrs
|
description |
+----+-------+----------------------------------------------+-------+----------+--------------------------------------------------------------------+-------------+
| 1 | 1 |
sip:sip.pstnhub.microsoft.com
<http://sip.pstnhub.microsoft.com>;transport=tls
| 0 | 3 |
socket=tls:172.16.30.206:5062;ping_from=sip:kamailio.domain1.com
<http://kamailio.domain1.com> | MS
Teams 1 |
| 2 | 2 |
sip:sip.pstnhub.microsoft.com
<http://sip.pstnhub.microsoft.com>;transport=tls
| 0 | 3 |
socket=tls:172.16.30.206:5063;ping_from=sip:kamailio.domain2.com
<http://kamailio.domain2.com> | MS
Teams 2 |
+----+-------+----------------------------------------------+-------+----------+--------------------------------------------------------------------+-------------+
When Kamailio is started only connection
with the first trunk is established:
/# kamcmd tls.list/
/{/
/ id: 1/
/ timeout: 0/
/ src_ip: 52.114.75.24/
/ src_port: 5061/
/ dst_ip: 172.16.30.206/
/ dst_port: 0/
/ cipher:
ECDHE-RSA-AES256-GCM-SHA384 TLSv1.2
Kx=ECDH Au=RSA Enc=AESGCM(256)
Mac=AEAD/
/ ct_wq_size: 0/
/ enc_rd_buf: 0/
/ flags: 2/
/ state: established/
/}/
/{/
/ id: 2/
/ timeout: 0/
/ src_ip: 52.114.75.24/
/ src_port: 7810/
/ dst_ip: 172.16.30.206/
/ dst_port: 5062/
/ cipher: AES256-GCM-SHA384
TLSv1.2 Kx=RSA Au=RSA
Enc=AESGCM(256) Mac=AEAD/
/ ct_wq_size: 0/
/ enc_rd_buf: 0/
/ flags: 2/
/ state: established/
/}/
/{/
/ id: 3/
/ timeout: 596/
/ src_ip: 52.114.75.24/
/ src_port: 7811/
/ dst_ip: 172.16.30.206/
/ dst_port: 5062/
/ cipher: AES256-GCM-SHA384
TLSv1.2 Kx=RSA Au=RSA
Enc=AESGCM(256) Mac=AEAD/
/ ct_wq_size: 0/
/ enc_rd_buf: 0/
/ flags: 2/
/ state: established/
/}/
Here is what I can see in Kamailio log file
when it sends an OPTIONS request to the
second trunk. Kamailio uses Default tls
configuration and MS Teams don't accept it:
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: ALERT:
<script>: == TRACE. tm:local-request.
fs is tls:172.16.30.206:5063
<http://172.16.30.206:5063>/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG: tm
[uac.c:352]: t_run_local_req(): apply
new updates without Via to sip msg/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/msg_translator.c:1796]:
check_boundaries(): no multi-part body/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/parser/msg_parser.c:610]:
parse_msg(): SIP Request:/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/parser/msg_parser.c:612]:
parse_msg(): method: <OPTIONS>/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/parser/msg_parser.c:614]:
parse_msg(): uri:
<sip:sip.pstnhub.microsoft.com
<http://sip.pstnhub.microsoft.com>;transport=tls>/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/parser/msg_parser.c:616]:
parse_msg(): version: <SIP/2.0>/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/parser/parse_via.c:1303]:
parse_via_param(): Found param type
232, <branch> =
<z9hG4bK169b.6411b4c3000000000000000000000000.0>;
state=16/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/parser/parse_via.c:2639]:
parse_via(): end of header reached,
state=5/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/parser/msg_parser.c:498]:
parse_headers(): Via found, flags=2/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/parser/msg_parser.c:500]:
parse_headers(): this is the first via/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core>
[core/parser/parse_addr_spec.c:864]:
parse_addr_spec(): end of header
reached, state=10/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/parser/msg_parser.c:171]:
get_hdr_field(): <To> [47];
uri=[sip:sip.pstnhub.microsoft.com
<http://sip.pstnhub.microsoft.com>;transport=tls]/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/parser/msg_parser.c:174]:
get_hdr_field(): to body
(47)[<sip:sip.pstnhub.microsoft.com
<http://sip.pstnhub.microsoft.com>;transport=tls>^M/
/], to tag (0)[]/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/parser/msg_parser.c:152]:
get_hdr_field(): cseq <CSeq>: <10>
<OPTIONS>/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/parser/msg_parser.c:185]:
get_hdr_field(): content_length=0/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/parser/msg_parser.c:89]:
get_hdr_field(): found end of header/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/parser/msg_parser.c:610]:
parse_msg(): SIP Request:/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/parser/msg_parser.c:612]:
parse_msg(): method: <OPTIONS>/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/parser/msg_parser.c:614]:
parse_msg(): uri:
<sip:sip.pstnhub.microsoft.com
<http://sip.pstnhub.microsoft.com>;transport=tls>/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/parser/msg_parser.c:616]:
parse_msg(): version: <SIP/2.0>/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/parser/parse_via.c:1303]:
parse_via_param(): Found param type
232, <branch> =
<z9hG4bK169b.6411b4c3000000000000000000000000.0>;
state=16/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/parser/parse_via.c:2639]:
parse_via(): end of header reached,
state=5/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/parser/msg_parser.c:498]:
parse_headers(): Via found, flags=2/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/parser/msg_parser.c:500]:
parse_headers(): this is the first via/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core>
[core/parser/parse_addr_spec.c:864]:
parse_addr_spec(): end of header
reached, state=10/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/parser/msg_parser.c:171]:
get_hdr_field(): <To> [47];
uri=[sip:sip.pstnhub.microsoft.com
<http://sip.pstnhub.microsoft.com>;transport=tls]/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/parser/msg_parser.c:174]:
get_hdr_field(): to body
(47)[<sip:sip.pstnhub.microsoft.com
<http://sip.pstnhub.microsoft.com>;transport=tls>^M/
/], to tag (0)[]/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/parser/msg_parser.c:152]:
get_hdr_field(): cseq <CSeq>: <10>
<OPTIONS>/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG: tm
[uac.c:189]:
uac_refresh_hdr_shortcuts(): cseq:
[CSeq: 10]/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/tcp_main.c:1993]:
tcp_send(): no open tcp connection
found, opening new one/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/ip_addr.c:229]:
print_ip(): tcpconn_new: new tcp
connection: 52.114.75.24/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/tcp_main.c:1175]:
tcpconn_new(): on port 5061, type 3,
socket -1/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG:
<core> [core/tcp_main.c:1498]:
tcpconn_add(): hashes: 2831:67:0, 1/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG: tls
[tls_server.c:199]:
tls_complete_init(): completing tls
connection initialization/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG: tls
[tls_server.c:162]:
tls_get_connect_server_name(): *xavp
with outbound server name not found*/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG: tls
[tls_server.c:142]:
tls_get_connect_server_id(): *xavp with
outbound server id not found*/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG: tls
[tls_server.c:228]:
tls_complete_init(): *Using initial TLS
domain TLSc<default>* (dom
0x7f35509da688 ctx 0x7f3550b7a568 sn [])/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG: tls
[tls_domain.c:1177]:
tls_lookup_private_key(): Private key
lookup for SSL_CTX-0x7f3550b7a568: (nil)/
/Jul 29 16:46:14 kamailio
/usr/sbin/kamailio[11809]: DEBUG: tls
[tls_domain.c:747]:
sr_ssl_ctx_info_callback(): SSL
handshake started/
/.../
If I change the Default configuration to
use kamailio.domain2.com
<http://kamailio.domain2.com> certificate,
the second trunk will connect but the first
one will fail.
I tried to set "$xavp(tls=>server_name)"
and "$xavp(tls[0]=>server_id)" variables to
the event_route[tm:local-request] section
but log still stated that server Name and
ID were not found.
Can someone please point me in the right
direction, how can I make Kamailio use the
correct certificates when establishing
multiple TLS connections?
Thanks a lot!
Regards, Volodymyr Ivanets
__________________________________________________________
Kamailio - Users Mailing List - Non
Commercial Discussions
* sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the
recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
*
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only
to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
--
Daniel-Constantin Mierla -- www.asipto.com
<http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>