6 Apr
2007
6 Apr
'07
3:01 a.m.
Hello,
can you capture and send the network trace for such case (using ngrep or
wireshark)?
Cheers,
Daniel
On 04/06/07 04:28, Eddie wrote:
Hi Daniel,
Thank you very much for your advise.
I captured packets by ethereal, but there is no reply for the first
PUBLISH message.
To implement PUBLISH module, I just followed the README in
/openser..../modules/presence
Is there anything else shoule be considerd?
Thanks so much!
Brs,
Eddie
在2007-04-05，"Daniel-Constantin Mierla" <daniel(a)voice-system.ro> 写道：
Hello,
seems that this is a retransmission of PUBLISH. Check the log above the
pasted messages. There should be the messages of processing the initial
PUBLISH. Check there to see if the reply was sent (you can use
ngrep/wireshark to watch the SIP traffic, therefore, you can see wheter
reply is sent or not).
Cheers,
Daniel
On 04/03/07 10:58, Eddie wrote:
Hi all,
I am a new to openser. I am using openser-1.2.0-notls. I met a issue
when I setup a presence server.
I use a UDP testing tool to send PUBLISH message :
PUBLISH sip:111@sip.comverse.com <mailto:111@sip.comverse.com> SIP/2.0
To: <sip:111@sip.comverse.com <mailto:111@sip.comverse.com>>
From: <sip:111@sip.comverse.com <mailto:111@sip.comverse.com>>;tag=aa0e9e60
Via: SIP/2.0/UDP
172.19.1.190:5060;branch=z9hG4bK-d87543-4f7005092661b51b-1--d87543-;rport
Call-ID: dd2288324976454c@UG9ja2V0X1BD
<mailto:dd2288324976454c@UG9ja2V0X1BD>
CSeq: 4444 PUBLISH
Contact: <sip:111@172.19.1.190 <mailto:111@172.19.1.190>:5060>
Expires: 3600
Max-Forwards: 70
Content-Type: application/pidf+xml
Event: presence
Content-Length: 549
<?xml version="1.0" encoding="UTF-8" ?>
<presence xmlns="urn:ietf:params:xml:ns:pidf"
xmlns:rpid="urn:ietf:params:xml:ns:pidf:rpid"
xmlns:dm="urn:ietf:params:xml:ns:pidf:data-model"
xmlns:op="urn:oma:params:xml:ns:pidf:oma-pres"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instan
<tuple id="t0001">
<status>
<basic>open</basic>
</status>
<op:overriding-willingness>
<op:basic>open</op:basic>
</op:overriding-willingness>
</tuple>
</presence>
but no 200 OK return back from the server. and I set debug level to 7,
the log is as followed:
4(5485) method: <PUBLISH>
4(5485) uri: <sip:111@sip.comverse.com <mailto:111@sip.comverse.com>>
4(5485) version: <SIP/2.0>
4(5485) parse_headers: flags=2
4(5485) DEBUG:parse_to:end of header reached, state=10
4(5485) DBUG:parse_to: display={}, ruri={sip:111@sip.comverse.com
<mailto:111@sip.comverse.com>}
4(5485) DEBUG: get_hdr_field: <To> [28]; uri=[sip:111@sip.comverse.com
<mailto:111@sip.comverse.com>]
4(5485) DEBUG: to body [<sip:111@sip.comverse.com
<mailto:111@sip.comverse.com>>
4(5485) Found param type 232, <branch> =
<z9hG4bK-d87543-4f7005092661b51b-1--d87543->; state=6
4(5485) Found param type 235, <rport> = <n/a>; state=17
4(5485) end of header reached, state=5
4(5485) parse_headers: Via found, flags=2
4(5485) parse_headers: this is the first via
4(5485) After parse_msg...
4(5485) preparing to run routing scripts...
4(5485) parse_headers: flags=100
4(5485) get_hdr_field: cseq <CSeq>: <4445> <PUBLISH>
4(5485) DEBUG:maxfwd:is_maxfwd_present: value = 70
4(5485) DEBUG: add_param: tag=aa0e9e60
4(5485) DEBUG:parse_to:end of header reached, state=29
4(5485) DBUG:parse_to: display={}, ruri={sip:111@sip.comverse.com
<mailto:111@sip.comverse.com>}
4(5485) parse_headers: flags=200
4(5485) DEBUG: get_hdr_body : content_length=549
4(5485) found end of header
4(5485) find_first_route: No Route headers found
4(5485) loose_route: There is no Route HF
4(5485) grep_sock_info - checking if host==us: 16==12 &&
[sip.comverse.com] == [172.19.1.170]
4(5485) grep_sock_info - checking if port 5060 matches port 5060
4(5485) grep_sock_info - checking if host==us: 16==12 &&
[sip.comverse.com] == [172.19.1.170]
4(5485) grep_sock_info - checking if port 5060 matches port 5060
4(5485) DEBUG: t_newtran: T on entrance=0xffffffff
4(5485) parse_headers: flags=ffffffffffffffff
4(5485) parse_headers: flags=78
4(5485) t_lookup_request: start searching: hash=29736, isACK=0
4(5485) DEBUG: RFC3261 transaction matched,
tid=-d87543-4f7005092661b51b-1--d87543-
4(5485) DEBUG:tm:REF_UNSAFE: after is 1
4(5485) DEBUG: t_lookup_request: transaction found (T=0xb6148f48)
4(5485) DEBUG:tm:t_retransmit_reply: nothing to retransmit
4(5485) DEBUG:tm:UNREF_UNSAFE: after is 0
4(5485) DEBUG:destroy_avp_list: destroying list (nil)
4(5485) receive_msg: cleaning up
5(5488) PRESENCE: msg_watchers_clean:cleaning pending subscriptions
5(5488) PRESENCE: msg_active_watchers_clean:cleaning expired watcher
information
5(5488) PRESENCE:msg_presentity_clean:cleaning expired presentity
information
I am confused about the issue, and I am not sure whether it is caused
by configuration files or mysql database.
Please help me. Thanks so much !
Brs,
Eddie
------------------------------------------------------------------------
每天上班第一件要做的事情是？ 马上看看>> <http://www.126.com/>
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)openser.org <mailto:Users@openser.org>
http://openser.org/cgi-bin/mailman/listinfo/users
------------------------------------------------------------------------
每天上班第一件要做的事情是？ 马上看看>> <http://www.126.com/>