Re: [Serusers] Debug information

Hi, please accept my apologies for asking the same questions. I have

through the sip tutorial, faqs and other docs with little success. In my ser.cfg I have uncommented these lines below (www_autorize) and once again get unauthorized user when attempting to register with the ATA and Xten.

have placed coptalk.com and sip.coptalk.com in the auth area of ser.cfg with the same results. In addition, I have tried changing my UID on the ATA from Rick, to Rick(a)coptalk.com and Rick(a)sip.coptalk.com, all with bad results. When I do a serctl show Rick it returns the following; +----------+------------------+-----------+---------------------+ | username | domain | grp | last_modified | +----------+------------------+-----------+---------------------+ | Rick | sip.coptalk.com | free-pstn | 2003-12-07 16:56:29 | | Rick | sip.coptalk.com | local | 2003-12-07 16:07:13 | +----------+------------------+-----------+---------------------+ This means there is a user named Rick and he should be able to register,

Thanks again for all your help, Rick At 11:08 AM 12/16/2003 +0100, Jesus Rodriguez wrote: >On Mon, 15 Dec 2003, Rick Gocher wrote: > >Hi, > > > # if (!www_authorize("coptalk.com",

> > # www_challenge("coptalk.com", "0"); > >This is the domain you have to use. The domain that you challenge is the >domain that must be sent in your credentials. If you use sip.coptalk.com,

>you have to challenge sip.coptalk.com instead coptalk.com as you are

>now. > > > > At 12:45 PM 12/15/2003 +0100, Jesus Rodriguez wrote: > > >On Fri, 12 Dec 2003, Rick Gocher wrote: > > > > > >Hello, > > > > > > > I'm not sure how to change the way the ata sends it credentials.

> have my > > > > name Rick listed for the UID:0 and UID:1 and the password for that > user. I > > > > filled in the gateway as both an IP and FQDN with neither changing

> > > > actual problem. I tried placing @coptalk.com and @sip.coptalk.com > behind > > > > my UID: i.e. Rick(a)sip.coptalk.com but then the ngrep reports > Unauthorized. > > > > etc. sip:Rick@sip.coptalk.com@sip.coptalk.com.... If I can't > change the > > > > ata perhaps I can change the way ser challenges? > > > > > >With Cisco ATA you don't need the gateway field. You have to fill: > > > > > >UID0 > > >PWD0 > > >GkOrProxy > > >UseSIP > > > > > >(and others, but these are required). > > > > > >For example, you have: > > > > > >UID0 = Rick > > >PWD0 = password > > >GkOrProxy = sip.coptalk.com > > >UseSIP = 1 > > > > > >Then, in SER you have to set you domain as sip.coptalk.com and NOT > > >coptalk.com. You MUST use the same domain in SER and ATA. If you set > GkOrPRoxy > > >in ATA as coptalk.com then SER must challenge coptalk.com. > > > > > >Regards. > > > > > > > > > > > > > > > > At 12:42 AM 12/12/2003 +0100, Jesus Rodriguez wrote: > > > > >On Thu, 11 Dec 2003, Rick Gocher wrote: > > > > > > > > > >Hello, > > > > > > > > > > > Just me, still trying to get authentication working... I have > found by > > > > > > placing a high debug value and starting ser I received some

> > > I never > > > > > > saw before as I had no ata box plugged in during the startup.

> > > not sure > > > > > > if this points to why I can't authenticate. When the output

> > > there is > > > > > > no routing headers, is that the fault of my ATA? > > > > > > > > > >I think was Jan who gave you the answer. SER is trying to > challenge with > > > > >domain sip.coptalk.com but you are sending credentials as

> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Dec 11 16:07:19 sip ser: 8(4583) SIP Request: > > > > > > Dec 11 16:07:19 sip ser: 8(4583) method: <REGISTER> > > > > > > Dec 11 16:07:19 sip ser: 8(4583) uri:

> > > > > > Dec 11 16:07:19 sip ser: 8(4583) version: <SIP/2.0> > > > > > > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: flags=1 > > > > > > Dec 11 16:07:19 sip ser: 8(4583) end of header reached,

> > > > > > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: Via found,

> > > > > > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: this is the > first via > > > > > > Dec 11 16:07:19 sip ser: 8(4583) After parse_msg... > > > > > > Dec 11 16:07:19 sip ser: 8(4583) preparing to run routing > scripts... > > > > > > Dec 11 16:07:19 sip ser: 8(4583) entering main route 8(4583) > DEBUG : > > > > > > is_maxfwd_present: searching for max_forwards header > > > > > > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: flags=128 > > > > > > Dec 11 16:07:19 sip ser: 8(4583) end of header reached,

> > > > > > Dec 11 16:07:19 sip ser: 8(4583) DEBUG: get_hdr_field: <To>

> > > > > > uri=[sip:Rick@sip.coptalk.com] > > > > > > Dec 11 16:07:19 sip ser: > > > > > > Dec 11 16:07:19 sip ser: ] > > > > > > Dec 11 16:07:19 sip ser: 8(4583) get_hdr_field: cseq <CSeq>:

> > > > > <REGISTER> > > > > > > Dec 11 16:07:19 sip ser: 8(4583) DEBUG: get_hdr_body : > > > content_length=0 > > > > > > Dec 11 16:07:19 sip ser: 8(4583) found end of header > > > > > > Dec 11 16:07:19 sip ser: 8(4583) DEBUG: is_maxfwd_present: > > > max_forwards > > > > > > header not found! > > > > > > Dec 11 16:07:19 sip ser: 8(4583) DEBUG: add_param:

> > > > > > Dec 11 16:07:19 sip ser: 8(4583) end of header reached,

> > > > > > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: flags=256 > > > > > > Dec 11 16:07:19 sip ser: 8(4583) find_first_route(): No Route > headers > > > > > found > > > > > > Dec 11 16:07:19 sip ser: 8(4583) loose_route(): There is no > Route HF > > > > > > Dec 11 16:07:19 sip ser: 8(4583) check_self - checking if > > > host==us: 16==9 > > > > > > && [sip.coptalk.com] == [127.0.0.1] > > > > > > Dec 11 16:07:19 sip ser: 8(4583) check_self - checking if

> 5060 > > > > > > matches port 5060 > > > > > > Dec 11 16:07:19 sip ser: 8(4583) check_self - checking if > > > host==us: 16==13 > > > > > > && [sip.coptalk.com] == [64.189.165.205] > > > > > > Dec 11 16:07:19 sip ser: 8(4583) check_self - checking if

> 5060 > > > > > > matches port 5060 > > > > > > Dec 11 16:07:19 sip ser: 8(4583) request for registration

> > > > > > check_nonce(): comparing > [3fd907c2aa2d6c72cd666f9109e45155055b2d36] and > > > > > > [3fd907c23a57f75133a55828041f2c9ee7b081c2] > > > > > > Dec 11 16:07:19 sip ser: 8(4583) pre_auth(): Invalid nonce

> > > received, > > > > > > very suspicious ! > > > > > > Dec 11 16:07:19 sip ser: > > > > > > Dec 11 16:07:19 sip ser: ' > > > > > > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: flags=-1 > > > > > > Dec 11 16:07:19 sip ser: 8(4583)

> > > > > > 64.189.165.206, 0) > > > > > > Dec 11 16:07:19 sip ser: 8(4583) receive_msg: cleaning up > > > > > > Dec 11 16:07:19 sip ser: 6(4581) SIP Request: > > > > > > Dec 11 16:07:19 sip ser: 6(4581) method: <REGISTER> > > > > > > Dec 11 16:07:19 sip ser: 6(4581) uri:

> > > > > > Dec 11 16:07:19 sip ser: 6(4581) version: <SIP/2.0> > > > > > > Dec 11 16:07:19 sip ser: 6(4581) parse_headers: flags=1 > > > > > > Dec 11 16:07:19 sip ser: 6(4581) end of header reached,

> > > > > > Dec 11 16:07:19 sip ser: 6(4581) parse_headers: Via found,

> > > > > > Dec 11 16:07:19 sip ser: 6(4581) parse_headers: this is the > first via > > > > > > Dec 11 16:07:19 sip ser: 6(4581) After parse_msg... > > > > > > Dec 11 16:07:19 sip ser: 6(4581) preparing to run routing > scripts... > > > > > > Dec 11 16:07:19 sip ser: 6(4581) entering main route 6(4581) > DEBUG : > > > > > > is_maxfwd_present: searching for max_forwards header > > > > > > Dec 11 16:07:19 sip ser: 6(4581) parse_headers: flags=128 > > > > > > Dec 11 16:07:19 sip ser: 6(4581) end of header reached,

> > > > > > Dec 11 16:07:19 sip ser: 6(4581) DEBUG: get_hdr_field: <To>

> > > > > > uri=[sip:Rick@sip.coptalk.com] > > > > > > Dec 11 16:07:19 sip ser: > > > > > > Dec 11 16:07:19 sip ser: ] > > > > > > Dec 11 16:07:19 sip ser: 6(4581) get_hdr_field: cseq <CSeq>:

> > > > > <REGISTER> > > > > > > Dec 11 16:07:19 sip ser: 6(4581) DEBUG: get_hdr_body : > > > content_length=0 > > > > > > Dec 11 16:07:19 sip ser: 6(4581) found end of header > > > > > > Dec 11 16:07:19 sip ser: 6(4581) DEBUG: is_maxfwd_present: > > > max_forwards > > > > > > header not found! > > > > > > Dec 11 16:07:19 sip ser: 6(4581) DEBUG: add_param:

> > > > > > Dec 11 16:07:19 sip ser: 6(4581) end of header reached,

> > > > > > Dec 11 16:07:19 sip ser: 6(4581) parse_headers: flags=256 > > > > > > Dec 11 16:07:19 sip ser: 6(4581) find_first_route(): No Route > headers > > > > > found > > > > > > Dec 11 16:07:19 sip ser: 6(4581) loose_route(): There is no > Route HF > > > > > > Dec 11 16:07:19 sip ser: 6(4581) check_self - checking if > > > host==us: 16==9 > > > > > > && [sip.coptalk.com] == [127.0.0.1] > > > > > > Dec 11 16:07:19 sip ser: 6(4581) check_self - checking if

> 5060 > > > > > > matches port 5060 > > > > > > Dec 11 16:07:19 sip ser: 6(4581) check_self - checking if > > > host==us: 16==13 > > > > > > && [sip.coptalk.com] == [64.189.165.205] > > > > > > Dec 11 16:07:19 sip ser: 6(4581) check_self - checking if

> 5060 > > > > > > matches port 5060 > > > > > > Dec 11 16:07:20 sip ser: 6(4581) request for registration

> > > > > > check_nonce(): comparing > [3fd907e3929aea9bad25fbd47b3ea062d9215574] and > > > > > > [3fd907e3929aea9bad25fbd47b3ea062d9215574] > > > > > > Dec 11 16:07:20 sip ser: 6(4581) get_ha1(): no result for

> > > > > > &#39;Rick(a)coptalk.com&#39; > > > > > > Dec 11 16:07:20 sip ser: > > > > > > Dec 11 16:07:20 sip ser: ' > > > > > > Dec 11 16:07:20 sip ser: 6(4581) parse_headers: flags=-1 > > > > > > Dec 11 16:07:20 sip ser: 6(4581)

_______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers