Hi Daniel, Yes, that is exactly what's happening. And only when using TLS. I have kamailio specifically setup to bind to eth0:0 so I have no idea how it's sending to eth0 Thanks, V
On Wed, May 6, 2015 at 8:26 AM, Daniel-Constantin Mierla miconda@gmail.com wrote:
Hello,
looking at your initial email in this discussion, you said:
"This works great except when I try using TLS, kamailio routes traffic from eth0:0 to eth0 then to correct destination"
Does that mean you see a connection from eth0:0 to eth0, so kamailio is receiving the SIP traffic again and they is forwarding to the destination?
Cheers, Daniel
On 06/05/15 13:51, Vik Killa wrote:
Do you do anything special in your kamailio config to handle the NIC aliases?
On Mon, May 4, 2015 at 10:21 PM, Slava Bendersky volga629@networklab.ca wrote:
Hello Vik, I don't have same problem it works fine for me, but I have same setup on public side where multiply aliases on interface is involved.
Slava.
*From: *"Vik Killa" vipkilla@gmail.com *To: *"sr-users" sr-users@lists.sip-router.org *Sent: *Monday, May 4, 2015 12:54:21 PM *Subject: *Re: [SR-Users] issue with TLS and 2 NIC interfaces
Are you having the same problem as myself? Thanks, V
On Fri, May 1, 2015 at 8:20 PM, Slava Bendersky volga629@networklab.ca wrote:
Hello Vik,
I have similar setup, try define you server configuration in tls.cfg
[server:ip address of alias interface:port of alias interface] method = TLSv1 verify_certificate = no require_certificate = no private_key = certificate = ca_list = crl =
Slava
*From: *"Vik Killa" vipkilla@gmail.com *To: *"sr-users" sr-users@lists.sip-router.org *Sent: *Wednesday, April 29, 2015 4:32:21 PM *Subject: *[SR-Users] issue with TLS and 2 NIC interfaces
Hello, if i have two interfaces (eth0 and eth0:0) I set kamailio to listen to the IP on eth0:0 This works great except when I try using TLS, kamailio routes traffic from eth0:0 to eth0 then to correct destination
It should be just doing eth0:0 -> correct destination
If I use UDP/TCP I am not seeing this behavior. If I set kamailio to listen to eth0 and remove eth0;0, TLS works fine.
I'm running kamailio compiled from source git master a few days ago. Is anyone else having this problem? I'm wondering if it's a bug. Thanks, V
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierlahttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio World Conference, May 27-29, 2015 Berlin, Germany - http://www.kamailioworld.com
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users