Hello and thank you for your response. I was going on something I read that said =>
“Getting rtp_engine to work with the standard kamailio.cfg is to simply add rtpengine_manage(); at the top of the NATMANAGE route so it will handle all rtp regardless of source being natted (in your config in the NAT router.”
Obviously, this is not correct.
From: sr-users sr-users-bounces@lists.kamailio.org On Behalf Of Yu Boot Sent: Tuesday, August 14, 2018 2:12 AM To: sr-users@lists.kamailio.org Subject: Re: [SR-Users] Rtpengine?
Hello.
It's not enough to install rtpproxy/rtpengine and start it. You need to call rtpengine functions from kamailio.cfg for every SIP packet with SDP so media will be routed "thru Kamailio".
To make it easier, I recommend to begin with rtpproxy, not rtpengine. Default kamailio.cfg contains everything you need to proxy media flow by rtpproxy, just enable WITH_NAT parameter.
14.08.2018 1:51, Wilkins, Steve пишет: HI All,
I am not sure if I understand it correctly but I thought that I could use rtpengine to redirect media packets. My current SIP flow is => Softphone=>Kamailio=>Asterisk=>Kamailio=>Softphone, and Media flows from is Asterisk<=>softphone. But I don’t want Media to flow this way. That is, I do not want Asterisk and the Softphone to be aware of each other. I would like the Media to go through Kamailio just like SIP packets do. I installed rtpengine and it starts and runs with no errors. I even see traffic with the call is made but media traffic still flows from softphone<=>asterisk.