[Users] LCR problem

Hello,

Im making tests and its not a LCR problem, its a problem from my GW2, when I use it for first option, it fails too, here you have the ngrep,

ClientA --> Proxy --> GW2 (192.168.10.93) (192.168.10.91) (195.219.74.166)

Regards

The problem is that the BYE request will be handled by your LCR logic. The BYE request should be route in the loose_route block as it is an in-dialog request. Maybe the BYE sent from the gateway is not correct. Please post a ngrep dump (ngrep -t -W byline port 5060)

regards klaus

Pepe wrote:

Hello,

Im configuring Openser with LCR module and Im having an extrange 

behavior, I have 2 gateways, GW1(preference1) and GW2(preference2),

                                             GW1(pref.1)
                                        /                        \
        ClientA --> OpenSer                               --> Client B
                                        \   GW2 (pref.2)  /          

When I call from Client A to Client B using GW1, all works fine, its the same when hang up Client B or Client A, but when GW1 fail(I provoke it changing codec) and use failure route (GW 2) then if Client A hang up all works fine, but the problem is when is Client B who hang up, its like a new conversation, GW 2 send BYE to openser and Openser just send "503 Service Not avilable - No gateways" to GW2, but doesnt send nothing to ClientA, any idea ????

Thx in advance