Re: [Serusers] error: mediaproxy/sendMediaproxyCommand(): can't connect to MediaProxy

Dear Paul: Yes, I have study the readme, and both start daemon of mediaproxy Python server and start my ser with mediaproxy module supported. I guess that my setting done. And I wanna forward a noanswer call from UA(1011) to PSTN(0939749xxx) via UA(1033). In my log, the call is ringing from UA1011 to UA1033 first. Then after a few seconds, failure_route[1] trigger, and it shall be forward(busy) to a PSTN number. I define this number at usr_preferences table and attribute:fwdbusy, value:sip:0939749xxx@ser.xxx.net.tw. I can find it try to connect to my CISCO trunk (xxx.xxx.190.243), but why is its uri/username still 1033 ? I guess that something is wrong in my ser.cfg. Charles My log: ------------------------------------------------------------------------------------------------------------------ SER: SIP Call On-Net section route(2) command request 88D1D3FD-0193-41D0-990C-06915D53D1BF(a)192.168.11.4 192.168.11.4:8000:audio 61.217.225.225 ser.xxx.net.tw local 61.229.13.49 remote X-PRO=20build=201082 info=from:1011@ser.xxx.net.tw,to:1033@ser.xxx.net.tw,fromtag:309679536,totag: SER: SIP Call On-Net section route(2) PDT:prefix2domain: no prefix found in [1033] Time:[Tue Feb 22 00:50:57 2005] Method:<INVITE> r-uri:<1033@ser.xxx.net.tw> IP:<61.217.225.225> From:<sip:1011@ser.xxx.net.tw> To:<sip:1033@ser.xxx.net.tw> <sip:1011@192.168.11.4:5060> SER: a INT user SER: BLIND CALL FORWARDING SER: Look aliases SER: Look location SER isflagset (sip) SER: Look aliases SER: Look location SER isflagset (sip) SER: SIP Call On-Net section route(2) command request 88D1D3FD-0193-41D0-990C-06915D53D1BF(a)192.168.11.4 192.168.11.4:8000:audio 61.217.225.225 ser.xxx.net.tw local 61.229.13.49 remote X-PRO=20build=201082 info=from:1011@ser.xxx.net.tw,to:1033@ser.xxx.net.tw,fromtag:309679536,totag: domain ser.xxx.net.tw doesn't define any mediaproxy. will use default mediaproxy for this call. command request 88D1D3FD-0193-41D0-990C-06915D53D1BF(a)192.168.11.4 192.168.11.4:8000:audio 61.217.225.225 ser.xxx.net.tw local 61.229.13.49 remote X-PRO=20build=201082 info=from:1011@ser.xxx.net.tw,to:1033@ser.xxx.net.tw,fromtag:309679536,totag:,dispatcher session 88D1D3FD-0193-41D0-990C-06915D53D1BF(a)192.168.11.4: started. listening on xxx.xxx.190.248:35006 command execution time: 6.19 ms forwarding to mediaproxy on /var/run/mediaproxy.sock: got: 'xxx.xxx.190.248 35006' command execution time: 92.46 ms SER: Failure Route section failure_route(1) SER: fork to fwdnoanswer SER: No Answer Failure and Jump to route(3) SER: Demestic Call Off-Net section route(3) SER: Connecting to PSTN..... <================== after this, uri should be &quot;0939749xxx(a)ser.xxx.net.tw&quot; ????? command request 88D1D3FD-0193-41D0-990C-06915D53D1BF(a)192.168.11.4 192.168.11.4:8000:audio 61.217.225.225 ser.xxx.net.tw local xxx.xxx.190.243 remote X-PRO=20build=201082 info=from:1011@ser.xxx.net.tw,to:1033@ser.xxx.net.tw,fromtag:309679536,totag: domain ser.xxx.net.tw doesn't define any mediaproxy. <==== this phone number should not be 1033, it should be 0939749xxx (a PSTN number) ?????? will use default mediaproxy for this call. command request 88D1D3FD-0193-41D0-990C-06915D53D1BF(a)192.168.11.4 192.168.11.4:8000:audio 61.217.225.225 ser.xxx.net.tw local xxx.xxx.190.243 remote X-PRO=20build=201082 info=from:1011@ser.xxx.net.tw,to:1033@ser.xxx.net.tw,fromtag:309679536,totag:,dispatcher command execution time: 0.34 ms forwarding to mediaproxy on /var/run/mediaproxy.sock: got: 'xxx.xxx.190.248 35006' command execution time: 3846.84 ms PDT:prefix2domain: no prefix found in [1033] SER: SIP Call On-Net section route(2) session 88D1D3FD-0193-41D0-990C-06915D53D1BF(a)192.168.11.4: 0/0/0 packets, 0/0/0 bytes (caller/called/relayed) session 88D1D3FD-0193-41D0-990C-06915D53D1BF(a)192.168.11.4: ended (did timeout).