You are welcome.
-- WBR Sergey Basov
15 июня 2017 г. 10:13 PM пользователь "Abdoul Osséni" < abdoul.osseni@gmail.com> написал:
Hello, yes, you were right.
There was something wrong in my routing config. See below, I remove the bad config.
Thank you very much
route[WITHINDLG] {
……
….
if (loose_route()) { route(DLGURI); if (is_method("BYE")) { setflag(FLT_ACC); # do accounting ... setflag(FLT_ACCFAILED); # ... even if thetransaction fails
} else if ( is_method("ACK") ) { # ACK is forwarded statelessy route(NATMANAGE); } else if ( is_method("NOTIFY") ) { # Add Record-Route for in-dialog NOTIFY as per RFC
record_route(); } else if ( is_method("INVITE") ) { # even if in most of the cases is useless, do RRfor
# re-INVITEs alos, as some buggy clients do change routeset
# during the dialog. xlog("Route with in Dialog: loose route $rU -> $fU\n"); record_route(); } route(RELAY); exit; }……
….
}
Regards
2017-06-15 16:27 GMT+02:00 Sergey Basov sergey.v.basov@gmail.com:
Do you only change topoh to topos in your config?
You can find my dump attached. There is duplicate packets this is issue of my capture architecture..
-- WBR Sergey Basov
15 июня 2017 г. 5:20 PM пользователь "Sergey Basov" < sergey.v.basov@gmail.com> написал:
Its very strange... I have record routes from 1 side and from another side, they are stripped and restored normaly.
On reinvite you have incorrect contact restored.
I will look at my config.
-- WBR Sergey Basov
15 июня 2017 г. 5:09 PM пользователь "Abdoul Osséni" < abdoul.osseni@gmail.com> написал:
The record route is missing with topos module. Maybe it is that the
problem? Regards.
2017-06-15 16:04 GMT+02:00 Abdoul Osséni abdoul.osseni@gmail.com:
I tried with an another uac (without +sip.instance="urn:uuid:14d62 d4f-8426-486b-88ee-077b9ff1fae2" in contact). Same issue.
I checked my routing logic in Kamailio. Same configs describe ici : http://kb.asipto.com/asterisk:realtime:kamailio-4.0.x-asteri sk-11.3.0-astdb?s[]=asterisk.
[image: Images intégrées 1]
Regards
Abdoul.
2017-06-15 14:34 GMT+02:00 Sergey Basov sergey.v.basov@gmail.com:
I checked in my environment all ok. Can you try without +sip.instance="urn:uuid:14d62 d4f-8426-486b-88ee-077b9ff1fae2" in contact?
-- Best regards, Sergey Basov e-mail: sergey.v.basov@gmail.com
2017-06-15 12:52 GMT+03:00 Abdoul Osséni abdoul.osseni@gmail.com:
Please find in attachment.
- topos module is disabled
- topoh module is enabled
I have no issue -- the contact header is updated.
I have only this issue when topos module is enabled but I will check again my routing logic in kamailio.
Regards
2017-06-15 11:39 GMT+02:00 Sergey Basov sergey.v.basov@gmail.com:
> I think you may have some error in your routing logic in kamailio... > > Can you try to disable topos module and try with topoh to see does > it handles contact modification properly? > > -- > Best regards, > Sergey Basov e-mail: sergey.v.basov@gmail.com > > 2017-06-15 12:07 GMT+03:00 Abdoul Osséni abdoul.osseni@gmail.com: > >> Hi, >> >> Please find in attachment the pcap file. >> >> Regards >> >> Abdoul >> >> 2017-06-15 9:43 GMT+02:00 Sergey Basov sergey.v.basov@gmail.com: >> >>> Hello, >>> >>> Can you send dump of the both side of call. >>> I using this module into production I have a lot of Re-Invites and >>> does not have this problem. >>> >>> -- >>> Best regards, >>> Sergey Basov e-mail: sergey.v.basov@gmail.com >>> >>> 2017-06-15 10:18 GMT+03:00 Abdoul Osséni abdoul.osseni@gmail.com >>> : >>> >>>> Hello, >>>> >>>> I have an issue when loading topos module on Kamailio 5.0.2 >>>> version. >>>> >>>> root@proxy:/home/tcpdump# kamailio -V >>>> version: kamailio 5.0.2 (x86_64/linux) >>>> >>>> >>>> >>>> The call flow is: uac --> kamailio --> Asterisk >>>> >>>> 1) Invite from uac >>>> 2) Kamailio forward the invite to asterisk >>>> 3) asterisk send 200 OK to kamailio >>>> 4) kamailio send 200 OK to uac -> in the conctact header, i can >>>> see the IP address of kamailio >>>> 5) uac send ACK to kamailio and kamailio forward the ACK to >>>> Asterisk >>>> 6) uac send re-invite: "media change" to kamailio. >>>> 7) kamailio forward the re-invite to asterisk and asterisk send >>>> 200 OK to kamailio >>>> 8) kamailio send 200 ok to uac --> but the contact header >>>> contains IP of Asterisk and not kamailio: is it normal? >>>> >>>> Thank for you help. >>>> >>>> Regards >>>> -- >>>> Abdoul OSSENI >>>> >>>> >>>> _______________________________________________ >>>> Kamailio (SER) - Users Mailing List >>>> sr-users@lists.kamailio.org >>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>> >>>> >>> >>> _______________________________________________ >>> Kamailio (SER) - Users Mailing List >>> sr-users@lists.kamailio.org >>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>> >>> >> >
-- Abdoul OSSENI Ingénieur Réseaux et systèmes chez THALES Co-Fondateur de ON SERVICES Tél : +33 601 135 167
-- Abdoul OSSENI Ingénieur Réseaux et systèmes chez THALES Co-Fondateur de ON SERVICES Tél : +33 601 135 167
-- Abdoul OSSENI Ingénieur Réseaux et systèmes chez THALES Co-Fondateur de ON SERVICES Tél : +33 601 135 167
-- Abdoul OSSENI Ingénieur Réseaux et systèmes chez THALES Co-Fondateur de ON SERVICES Tél : +33 601 135 167
