For yawl out there. Here is a working copy.
http://www.natambu.com/sbc-rtpproxy.cfg
Setup the clients with a domain that points directly to the interface of your softswitch, and put the ip address of the SER server into the 'proxy' section of the configuration.
Natambu Obleton
Network Engineer
FastTrack Communications
nobleton@fasttrackcomm.net
(970) 247-3366 office
(970) 247-2426 fax
_____
From: serusers-bounces@lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Natambu Obleton Sent: Tuesday, September 12, 2006 8:32 AM To: 'Greger V. Teigre' Cc: serusers@iptel.org Subject: RE: [Serusers] SER as fake SBC...
My softswitch doesn't support clients behind NAT, but to use the centrex based features I need the clients to register directly with the softswitch. So pretty much I need it to proxy for NAT translation.
Natambu Obleton
Network Engineer
FastTrack Communications
nobleton@fasttrackcomm.net
(970) 247-3366 office
(970) 247-2426 fax
_____
From: Greger V. Teigre [mailto:greger@teigre.com] Sent: Tuesday, September 12, 2006 12:58 AM To: Natambu Obleton Cc: serusers@iptel.org Subject: Re: [Serusers] SER as fake SBC...
I'm curious: Why do you want to simulate an SBC? (that is Session Border Controller for those who don't know) Topology hiding? Do you want to proxy everything as well? g-)
Natambu Obleton wrote:
If anyone is playing along with me.. I got registration to work. I replaced "save" with "save_noreply". Now to get NAT working..
Natambu Obleton
Network Engineer
FastTrack Communications
nobleton@fasttrackcomm.net
(970) 247-3366 office
(970) 247-2426 fax
_____
From: serusers-bounces@lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Natambu Obleton Sent: Monday, September 11, 2006 12:25 PM To: serusers@iptel.org Subject: [Serusers] SER as fake SBC...
I understand that SER is not an SBC, but I can see how it could maybe do it. So I started with hello-world.cfg from the onsip.org crowd and started playing. So I rewrite the contact address to send the address and port of the SER server and that works. I can make calls out, but when call come in they get routed to SER and it fails because my UA is not in the location database.
# ------------------------------------------------------------------------
# Call Type Processing Section
# ------------------------------------------------------------------------
if (uri!=myself) {
if (method=="REGISTER") {
if (!subst('/Contact: mailto:sip:(.*)@(.*) sip:(.*)@(.*)/Contact: mailto:sip:\1@206.123.214.55:5060 sip:\1@206.123.214.55:5060/ig')) {
log("******************************SUBST FAILED ************************************\n");
};
# save("location");
};
if (!t_relay()) {
sl_reply_error();
};
break;
};
When I have 'save("location")' in my configuration, Then I don't get registered with my softswitch. So what does 'save("location")' do exactly? Beside put an entry in my location database? Thanks.
In my setup I am not using NAT at all. UA, SER, and my softswitch all have public ip addresses.
Natambu Obleton
Network Engineer
FastTrack Communications
nobleton@fasttrackcomm.net
(970) 247-3366 office
(970) 247-2426 fax
_____
_______________________________________________ Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers