[Serusers] restarting ser

Hi, I have a problem with ser 0.8.11pre36 (i386/linux) which is the stable version downloaded from cvs: Often when I start it, it pretends to be ok (log file says Listing on ....) but in fact all ser processes are dead. I need to start it a few times usually, to get it running. Once it is running and I try to shut it down it writes a lot (thousands!) of error messages into the log file. Messages in the log seem to be repeated. This also occurs if no single message has been sent to it. I attach the config file I'm using and a short extract from the log file. Any ideas appreciated! (I did not have this problem with ser version 0.8.11pre26 which I used before.) Thanks, Mario -- The University of Stirling is a university established in Scotland by charter at Stirling, FK9 4LA. Privileged/Confidential Information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), you may not disclose, copy or deliver this message to anyone and any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. In such case, you should destroy this message and kindly notify the sender by reply email. Please advise immediately if you or your employer do not consent to Internet email for messages of this kind. Opinions, conclusions and other information in this message that do not relate to the official business of the University of Stirling shall be understood as neither given nor endorsed by it. # # $Id: ser.cfg,v 1.18 2003/05/06 16:19:15 janakj Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" alias="cs.stir.ac.uk" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" #loadmodule "/usr/local/lib/ser/modules/pscon.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") #modparam("pscon", "polserver_name", "d254203.cs.stir.ac.uk") #modparam("pscon", "polserver_port", 9997) #modparam("pscon", "lead_msg", "") #modparam("pscon", "tail_msg", "") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # exec_pol(); # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing loose_route(); # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("cs.stir.ac.uk", "subscriber")) { www_challenge("cs.stir.ac.uk", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } Jul 7 12:20:47 d254203 ser: Listening on Jul 7 12:20:47 d254203 ser: 127.0.0.1 [127.0.0.1]:5060 Jul 7 12:20:47 d254203 ser: 139.153.254.203 [139.153.254.203]:5060 Jul 7 12:20:47 d254203 ser: Aliases: d254203.cs.stir.ac.uk:5060 localhost:5060 localhost.localdomain:5060 d254203:5060 cs.stir.ac.uk:* Jul 7 12:20:47 d254203 ser: Listening on Jul 7 12:20:47 d254203 ser: 127.0.0.1 [127.0.0.1]:5060 Jul 7 12:20:47 d254203 ser: 139.153.254.203 [139.153.254.203]:5060 Jul 7 12:20:47 d254203 ser: Aliases: d254203.cs.stir.ac.uk:5060 localhost:5060 localhost.localdomain:5060 d254203:5060 cs.stir.ac.uk:* Jul 7 12:20:47 d254203 ser: Listening on Jul 7 12:20:47 d254203 ser: 127.0.0.1 [127.0.0.1]:5060 Jul 7 12:20:47 d254203 ser: 139.153.254.203 [139.153.254.203]:5060 Jul 7 12:20:47 d254203 ser: Aliases: d254203.cs.stir.ac.uk:5060 localhost:5060 localhost.localdomain:5060 d254203:5060 cs.stir.ac.uk:* Jul 7 12:20:47 d254203 ser: ser startup succeeded Jul 7 12:20:47 d254203 /usr/local/sbin/ser[1109]: mod_init(): Database connection opened successfuly Jul 7 12:20:47 d254203 /usr/local/sbin/ser[1109]: INFO: udp_init: SO_RCVBUF is initially 65535 Jul 7 12:20:47 d254203 /usr/local/sbin/ser[1109]: INFO: udp_init: SO_RCVBUF is finally 131070 Jul 7 12:20:47 d254203 /usr/local/sbin/ser[1109]: INFO: udp_init: SO_RCVBUF is initially 65535 Jul 7 12:20:47 d254203 /usr/local/sbin/ser[1109]: INFO: udp_init: SO_RCVBUF is finally 131070 Jul 7 12:20:47 d254203 /usr/local/sbin/ser[1127]: INFO: fifo process starting: 1127 Jul 7 12:20:47 d254203 /usr/local/sbin/ser[1127]: SER: open_uac_fifo: fifo server up at /tmp/ser_fifo... Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: used= 3764, used+overhead=36332, free=986540 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: max used (+overhead)= 36368 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: dumping all allocked. fragments: Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: 0. N address=0x80bd3b0 frag=0x80bd398 size=16 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: alloc'd from fifo_server.c: register_fifo_cmd(122) Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: start check=f0f0f0f0, end check= c0c0c0c0, abcdefed Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: 1. N address=0x80bd3f0 frag=0x80bd3d8 size=16 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: alloc'd from fifo_server.c: register_fifo_cmd(122) Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: start check=f0f0f0f0, end check= c0c0c0c0, abcdefed Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1144]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1143]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1142]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1141]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1140]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1127]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1126]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1119]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1118]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1117]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1116]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1115]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1114]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1113]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: 2. N address=0x80bd430 frag=0x80bd418 size=16 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1144]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1143]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1142]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1141]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1140]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1127]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1126]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1119]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1118]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1117]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1116]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1115]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1114]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1113]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: alloc'd from fifo_server.c: register_fifo_cmd(122) Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1144]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1143]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1142]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1141]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1140]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1127]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1126]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1119]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1118]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1117]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1116]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1115]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1114]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1113]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: start check=f0f0f0f0, end check= c0c0c0c0, abcdefed Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1144]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1143]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1142]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1141]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1140]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1127]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1126]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1119]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1118]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1117]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1116]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1115]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1114]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1113]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: 3. N address=0x80bd470 frag=0x80bd458 size=16 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1144]: used= 3764, used+overhead=36332, free=986540 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1143]: used= 3764, used+overhead=36332, free=986540