26 Sep
2022
26 Sep
'22
7:50 p.m.
Hello,
secsipid_check_identity("") should be ok, because the parameter is
empty, but secsipid_check_identity() is not ok, because is no parameter.
Isn't it working when you have secsipid_check_identity("")?
It has to be one certificate, which corresponds to the key that was used
to generate the identity header. The function does not expect many
certificates and loop to see if one of them corresponds to the key.
Cheers,
Daniel
On 26.09.22 17:53, Володимир Іванець wrote:
Hello Daniel!
I started with a simpler configuration: /if
(secsipid_check_identity()) {/ and /if (secsipid_check_identity(""))
{/ - according to documentation: /If the parameter is empty, the
function is downloading the key using the URL from "info" parameter of
the Identity header, using the value od "timeout" parameter to limit
the download time./ If this matters, I did not configure modparam
"expire" and "timeout".
When I called secsipid_check_identity with a path to the certificate,
Kamailio started as expected.
Is there something else I need to do or the
function /secsipid_check_identity/ must receive a path to certificate
as parameter? Also, is it safe to assume that this file can contain
multiple certificates?
Thank you very much!
пн, 26 вер. 2022 р. о 17:36 Daniel-Constantin Mierla
<miconda(a)gmail.com> пише:
Hello,
maybe the function is provided with invalid parameters? What's the
line 47 in the file?
Cheers,
Daniel
On 26.09.22 15:54, Володимир Іванець wrote:
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio Advanced Training - Online
Nov 7-10, 2022 (Europe Timezone)
* https://www.asipto.com/sw/kamailio-advanced-training-online/
Hello everyone!
I'm testing calls with STIR/SHAKEN with a Secsipid module on a
Kamailio version 5.6.1 and ran into a problem. Outbound calls
work fine when the function /secsipid_add_identity/ with
appropriate parameters is called. But as soon as I add function
/secsipid_check_identity/ to my configuration, Kamilio would not
start. Here is an error message I get:
/kamailio: CRITICAL: <core> [core/cfg.y:3791]: yyerror_at():
parse error in config file
/etc/kamailio/include/registrar.cfg, line 47, column 39:
unknown command, missing loadmodule?/
/
/
/loadmodule "secsipid.so"/ is present and is above the
function /secsipid_check_identity/ call. Both secsipid.so
and secsipid_proc.so module files are the correct version and
present on the system.
Another question is related to the rpm package build. How do you
build additional modules? I made adjustment to
the pkg/kamailio/Makefile file. In the *cfg* section
changed /$(MAKE) -C ../../src cfg/ with /$(MAKE) FLAVOUR=kamailio
include_modules="secsipid secsipid_proc" -C ../../src cfg/.
Required modules appeared in the modules.lst file but their rpm
packages were not built.
Thank you very much!
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Kamailio Advanced Training - Online
Nov 7-10, 2022 (Europe Timezone)
* https://www.asipto.com/sw/kamailio-advanced-training-online/