6 Dec
2005
6 Dec
'05
9:24 a.m.
On Tue, Dec 06, 2005 at 10:38:11AM +0200, Juha Heinanen wrote:
in route block, you have to call load_contacts()
followed by
next_contacts(), which will load the first set of contacts. then each
time you enter failure route, you need to call next_contacts() again.
Thanks for the info, that took care of the problem!! It works really
well now!! I also needed to had a t_on_failure in my failure route so it
would run the failure route again if the second contact was busy, so it
would go to the third an so on. The lcr module works great and seems to
me to be by far the easiest to implement for this! Thanks for releasing
this module Juha!!!
Brian