18 Aug
2015
18 Aug
'15
6:42 a.m.
Hello,
On 08/17/2015 11:22 PM, David Cunningham wrote:
We have a scenario like this:
SUA -> Kamailio with registrar module -> Asterisk
A call from the SUA is set up with SIP timers, and after 15 minutes
Asterisk sends a re-INVITE to Kamailio to forward on to the SUA. That
re-INVITE has a RURI with the address and port of the SUA at the time
the call started.
Now if the SUA re-registers after the call starts and before the
re-INVITE, and is on a new address or port number, then the re-INVITE
never gets to the phone.
Obviously Kamailio should send the re-INVITE to the new address/port,
but is not. The re-INVITE is routed using the lookup() function.
Can anyone suggest why this is happening?
Reinvites are just ordinary in-dialog requests, and thus should be
routed as in-dialog requests, in the loose_route() section of the config
file, i.e.
if(has_totag()) {
if(loose_route()) {
if(!t_relay())
sl_reply_error();
exit;
} else {
if(is_method("ACK")) {
if(t_check_trans())
t_relay();
exit;
}
sl_send_reply("403", "Forbidden");
}
exit;
}
In-dialog requests (including reinvites) should _never_ be routed
dynamically, e.g. based on lookup(). For dialogs that are established
through the proxy and where the proxy requests to remain in the path of
in-dialog requests by adding a Record-Route header, the in-dialog
requests follow a strictly predetermined path that was computed at the
time of the establishment of the dialog. This is true of end-to-end ACKs
(for 2xx replies), reinvites, BYEs, etc.
Additionally, the Request URI of the in-dialog request should be equal
to the Contact URI of the remote party to the dialog. This is known as
the "remote target" in standards parlance. It is at the time of the
initial dialog-forming request routing that all NAT-related
considerations are computed, e.g. countermeasures for the difference
between the outward representations made by a party's Contact URI and
the actual network and transport-layer source from which the initial
request or reply originated.
So, in short, you shouldn't be doing anything other than the
abovementioned logic to route a reinvite, notwithstanding RTP pivoting
measures if using rtpproxy/rtpengine.
-- Alex
--
Alex Balashov | Principal | Evariste Systems LLC
303 Perimeter Center North, Suite 300
Atlanta, GA 30346
United States
Tel: +1-800-250-5920 (toll-free) / +1-678-954-0671 (direct)
Web: http://www.evaristesys.com/, http://www.csrpswitch.com/