[Kamailio-Users] room does not exists in IMC

Dear Experts, I have been trying to configure IMC for quite some time now..when ti try to create the chatroom (using my xlite phone), using the command #create q, i get the following error. *ERROR:imc:imc_handle_message: room [q] does not exist! Sep 17 10:25:36 [2562] ERROR:imc:imc_manager: failed to handle 'message' * Iam posting my cfg below.. Your sujjestion would be of immense help to me..

# # $Id: kamailio.cfg 5881 2009-06-22 09:13:04Z henningw $ # # Kamailio (OpenSER) SIP Server - basic configuration script # - web: http://www.kamailio.org # - svn: http://openser.svn.sourceforge.net/viewvc/openser/ # # Direct your questions about this file to: users@lists.kamailio.org

debug=3 log_stderror=yes log_facility=LOG_LOCAL0

fork=yes children=4

port=5060

/* uncomment and configure the following line if you want Kamailio to bind on a specific interface/port/proto (default bind on all available) */ #listen=udp:192.168.1.2:5060

####### Modules Section ########

#set module path mpath="/usr/local/lib/kamailio/modules/"

/* uncomment next line for MySQL DB support */ loadmodule "db_mysql.so" loadmodule "mi_fifo.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "pv.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "uri_db.so" loadmodule "siputils.so" loadmodule "xlog.so" loadmodule "acc.so" loadmodule "imc.so"

/* uncomment next lines for MySQL based authentication support NOTE: a DB (like db_mysql) module must be also loaded */ loadmodule "auth.so" loadmodule "auth_db.so" /* uncomment next line for aliases support NOTE: a DB (like db_mysql) module must be also loaded */ #loadmodule "alias_db.so" /* uncomment next line for multi-domain support NOTE: a DB (like db_mysql) module must be also loaded NOTE: be sure and enable multi-domain support in all used modules (see "multi-module params" section ) */ #loadmodule "domain.so" /* uncomment the next two lines for presence server support NOTE: a DB (like db_mysql) module must be also loaded */ #p#loadmodule "presence.so" #p#loadmodule "presence_xml.so"

#n#loadmodule "nathelper.so"

# ----------------- setting module-specific parameters ---------------

# ----- mi_fifo params ----- modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo")

# ----- rr params ----- # add value to ;lr param to cope with most of the UAs modparam("rr", "enable_full_lr", 1) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 0)

# ----- rr params ----- modparam("registrar", "method_filtering", 1) /* uncomment the next line to disable parallel forking via location */ # modparam("registrar", "append_branches", 0) /* uncomment the next line not to allow more than 10 contacts per AOR */ #modparam("registrar", "max_contacts", 10)

# ----- uri_db params ----- /* by default we disable the DB support in the module as we do not need it in this configuration */ modparam("uri_db", "use_uri_table", 0) modparam("uri_db", "db_url", "")

# ----- acc params ----- /* what sepcial events should be accounted ? */ modparam("acc", "early_media", 1) modparam("acc", "report_ack", 1) modparam("acc", "report_cancels", 1) /* by default ww do not adjust the direct of the sequential requests. if you enable this parameter, be sure the enable "append_fromtag" in "rr" module */ modparam("acc", "detect_direction", 0) /* account triggers (flags) */ modparam("acc", "failed_transaction_flag", 3) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 2) modparam("acc", "log_extra",

"src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")

# ----- auth_db params ----- /* uncomment the following lines if you want to enable the DB based authentication */ modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("auth_db", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("auth_db", "load_credentials", "")

#-------tm params----- modparam("tm", "fr_timer", 10 ) modparam("tm", "fr_inv_timer", 15 ) modparam("tm", "wt_timer", 10 )

#-------imc params----- modparam("imc", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("imc", "hash_size", 8) modparam("imc", "imc_cmd_start_char", "#")

#n#modparam("usrloc", "nat_bflag", 6)

####### Routing Logic ########

# main request routing logic

route{

if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }

# NAT detection route(4);

if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { if (is_method("BYE")) { setflag(1); # do accounting ... setflag(3); # ... even if the transaction fails } route(1); } else { if (is_method("SUBSCRIBE") && uri == myself) { # in-dialog subscribe requests route(2); exit; } if ( is_method("ACK") ) { if ( t_check_trans() ) { # non loose-route, but stateful ACK; must be an ACK after a 487 or e.g. 404 from upstream server t_relay(); exit; } else { # ACK without matching transaction ... ignore and discard.\n"); exit; } } sl_send_reply("404","Not here"); } exit; }

#initial requests

# CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) t_relay(); exit; }

t_check_trans();

# authentication route(3);

# record routing if (!is_method("REGISTER|MESSAGE")) record_route();

# account only INVITEs if (is_method("INVITE")) { setflag(1); # do accounting } if (!uri==myself) /* replace with following line if multi-domain support is used */ ##if (!is_uri_host_local()) { append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS ##if($rd=="tls_domain1.net") { ## t_relay("tls:domain1.net"); ## exit; ##} else if($rd=="tls_domain2.net") { ## t_relay("tls:domain2.net"); ## exit; ##} route(1); }

# requests for my domain

if( is_method("PUBLISH|SUBSCRIBE")) route(2);

if (is_method("REGISTER")) { if (!save("location")) sl_reply_error();

exit; }

#if(uri=~"sip:q.*@") if(uri=~"sip:q@192.168.64.75") { # IMC - message xdbg("script: message from [$fu] r-uri [$ru] msg [$rb]\n"); if(is_method("MESSAGE")) { log("MESSAGE received -> processing with imc\n"); sl_send_reply("200", "ok");

imc_manager();

exit; } else { sl_send_reply("404", "not found"); exit; }; } else { xdbg("script: message not for room, from [$fu] r-uri [$ru] msg [$rb]\n"); if(!lookup("location")) { sl_send_reply("404", "not found"); exit; } t_relay(); #sl_send_reply("200", "ok"); exit(); };

if ($rU==NULL) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; }

# apply DB based aliases (uncomment to enable) ##alias_db_lookup("dbaliases");

if (!lookup("location")) { switch ($retcode) { case -1: case -3: t_newtran(); t_reply("404", "Not Found"); exit; case -2: sl_send_reply("405", "Method Not Allowed"); exit; } }

# when routing via usrloc, log the missed calls also setflag(2);

route(1); }

route[1] {

/* example how to enable some additional event routes */ if (is_method("INVITE")) { #t_on_branch("1"); t_on_reply("1"); t_on_failure("1"); }

if (!t_relay()) { sl_reply_error(); } exit; }

# Presence route /* uncomment the whole following route for enabling presence server */ route[2] {

# if presence enabled, this part will not be executed if (is_method("PUBLISH") || $rU==null) { sl_send_reply("404", "Not here"); exit; } return; }

# Authentication route /* uncomment the whole following route for enabling authentication */ route[3] { if (is_method("REGISTER")) { # authenticate the REGISTER requests (uncomment to enable auth) if (!www_authorize("", "subscriber")) { www_challenge("", "0"); exit; }

if ($au!=$tU) { sl_send_reply("403","Forbidden auth ID"); exit; } } else { # authenticate if from local subscriber (uncomment to enable auth) if (from_uri==myself) { if (!proxy_authorize("", "subscriber")) { proxy_challenge("", "0"); exit; } if (is_method("PUBLISH")) { if ($au!=$tU) { sl_send_reply("403","Forbidden auth ID"); exit; } } else { if ($au!=$fU) { sl_send_reply("403","Forbidden auth ID"); exit; } }

consume_credentials(); # caller authenticated } } return; }

# Caller NAT detection route /* uncomment the whole following route for enabling Caller NAT Detection */ route[4]{

return; }

# RTPProxy control /* uncomment the whole following route for enabling RTPProxy Control */ route[5] {

return; }

branch_route[1] { xdbg("new branch at $ru\n"); }

onreply_route[1] { xdbg("incoming reply\n");

}

failure_route[1] {

if (t_was_cancelled()) { exit; }

}

- Regards, Rajesh