21 Dec
2010
21 Dec
'10
3:02 p.m.
Hello Marius,
Yes, I armed the failure_route with 't_on_failure("1")' when I setup
the
CFNA...but the outgoing call generated by the CFNA doesn't go to the
failure_route.
If I deactivate the flag which triggered the voicemail, I have a loop and
the phone rings again after the timer.
Igor.
2010/12/21 marius zbihlei <marius.zbihlei(a)1and1.ro>
On 12/21/2010 03:22 PM, Igor Potjevlesch wrote:
Hello all,
I have setup a mechanism to forward outgoing calls to another gateway if
the first one replies with 5xx. I have simply used ‘t_check_status’ in the
failure_route. This works.
But, with a CFNA it doesn’t work : the incoming call is treated by SER
(0.9.9). After the timer has expired the call goes to ‘failure_route’ for
the first time to setup the CFNA with, finally, an ‘append_branch’. At this
moment, the first gateway replies with 5xx and the call never goes to
‘failure_route’. I can match the 5xx within the ‘onreply_route’, but that’s
all. So, instead of trying another gateway, the initial incoming calls
terminate on the voicemail.
Can anyone help me?
Hello,
Have you loaded the/another failure route for the second time in the CFNA
failure route handler?
Marius
Regards,
Igor.
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users