16 Dec
2003
16 Dec
'03
2:39 p.m.
Hi, please accept my apologies for asking the same questions. I have read
through the sip tutorial, faqs and other docs with little success. In my
ser.cfg I have uncommented these lines below (www_autorize) and once again
get unauthorized user when attempting to register with the ATA and Xten. I
have placed coptalk.com and sip.coptalk.com in the auth area of ser.cfg
with the same results. In addition, I have tried changing my UID on the
ATA from Rick, to Rick(a)coptalk.com and Rick(a)sip.coptalk.com, all with bad
results. When I do a serctl show Rick it returns the following;
+----------+------------------+-----------+---------------------+
| username | domain | grp | last_modified |
+----------+------------------+-----------+---------------------+
| Rick | sip.coptalk.com | free-pstn | 2003-12-07 16:56:29 |
| Rick | sip.coptalk.com | local | 2003-12-07 16:07:13 |
+----------+------------------+-----------+---------------------+
This means there is a user named Rick and he should be able to register, right?
Thanks again for all your help,
Rick
At 11:08 AM 12/16/2003 +0100, Jesus Rodriguez wrote:
On Mon, 15 Dec 2003, Rick Gocher wrote:
Hi,
Saludos
JesusR.
-------------------------------
Jesus Rodriguez
VozTelecom Sistemas, S.L.
jesusr(a)voztele.com
http://www.voztele.com
Tel. 902360305
-------------------------------
# if
(!www_authorize("coptalk.com", "subscriber")) {
# www_challenge("coptalk.com", "0");
This is the domain you have to use. The domain that you challenge is the
domain that must be sent in your credentials. If you use sip.coptalk.com, then
you have to challenge sip.coptalk.com instead coptalk.com as you are doing
now.
At 12:45 PM 12/15/2003 +0100, Jesus Rodriguez
wrote:
>On Fri, 12 Dec 2003, Rick Gocher wrote:
>
>Hello,
>
> > I'm not sure how to change the way the ata sends it credentials. I
have my
> > name Rick listed for the UID:0 and
UID:1 and the password for that
user. I
> > filled in the gateway as both an IP and
FQDN with neither changing the
> > actual problem. I tried placing @coptalk.com and @sip.coptalk.com
behind
> > my UID: i.e. Rick(a)sip.coptalk.com but
then the ngrep reports
Unauthorized.
> > etc.
sip:Rick@sip.coptalk.com@sip.coptalk.com.... If I can't
change the
> > ata perhaps I can change the way ser
challenges?
>
>With Cisco ATA you don't need the gateway field. You have to fill:
>
>UID0
>PWD0
>GkOrProxy
>UseSIP
>
>(and others, but these are required).
>
>For example, you have:
>
>UID0 = Rick
>PWD0 = password
>GkOrProxy = sip.coptalk.com
>UseSIP = 1
>
>Then, in SER you have to set you domain as sip.coptalk.com and NOT
>coptalk.com. You MUST use the same domain in SER and ATA. If you set
GkOrPRoxy
>in ATA as coptalk.com then SER must challenge
coptalk.com.
>
>Regards.
>
>
>
>
> > At 12:42 AM 12/12/2003 +0100, Jesus Rodriguez wrote:
> > >On Thu, 11 Dec 2003, Rick Gocher wrote:
> > >
> > >Hello,
> > >
> > > > Just me, still trying to get authentication working... I have
found by
> > > > placing a high debug value
and starting ser I received some errors
> I never
> > > > saw before as I had no ata box plugged in during the startup.
I'm
> not sure
> > > > if this points to why I can't authenticate. When the output
says
> there is
> > > > no routing headers, is that the fault of my ATA?
> > >
> > >I think was Jan who gave you the answer. SER is trying to
challenge
with
> > >domain sip.coptalk.com but you are
sending credentials as coptalk.com
> > >
> > >
> > >
> > >
> > >
> > > > Dec 11 16:07:19 sip ser: 8(4583) SIP Request:
> > > > Dec 11 16:07:19 sip ser: 8(4583) method: <REGISTER>
> > > > Dec 11 16:07:19 sip ser: 8(4583) uri:
<sip:sip.coptalk.com>
> > > > Dec 11 16:07:19 sip ser: 8(4583) version: <SIP/2.0>
> > > > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: flags=1
> > > > Dec 11 16:07:19 sip ser: 8(4583) end of header reached, state=5
> > > > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: Via found, flags=1
> > > > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: this is the
first via
> > > > Dec 11 16:07:19 sip ser:
8(4583) After parse_msg...
> > > > Dec 11 16:07:19 sip ser: 8(4583) preparing to run routing
scripts...
> > > > Dec 11 16:07:19 sip ser:
8(4583) entering main route 8(4583)
DEBUG :
> > > > is_maxfwd_present: searching
for max_forwards header
> > > > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: flags=128
> > > > Dec 11 16:07:19 sip ser: 8(4583) end of header reached, state=8
> > > > Dec 11 16:07:19 sip ser: 8(4583) DEBUG: get_hdr_field: <To>
[27];
> > > > uri=[sip:Rick@sip.coptalk.com]
> > > > Dec 11 16:07:19 sip ser:
> > > > Dec 11 16:07:19 sip ser: ]
> > > > Dec 11 16:07:19 sip ser: 8(4583) get_hdr_field: cseq <CSeq>:
<7>
> > > <REGISTER>
> > > > Dec 11 16:07:19 sip ser: 8(4583) DEBUG: get_hdr_body :
> content_length=0
> > > > Dec 11 16:07:19 sip ser: 8(4583) found end of header
> > > > Dec 11 16:07:19 sip ser: 8(4583) DEBUG: is_maxfwd_present:
> max_forwards
> > > > header not found!
> > > > Dec 11 16:07:19 sip ser: 8(4583) DEBUG: add_param: tag=1804086518
> > > > Dec 11 16:07:19 sip ser: 8(4583) end of header reached, state=29
> > > > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: flags=256
> > > > Dec 11 16:07:19 sip ser: 8(4583) find_first_route(): No Route
headers
> > > found
> > > > Dec 11 16:07:19 sip ser: 8(4583) loose_route(): There is no
Route HF
> > > > Dec 11 16:07:19 sip ser:
8(4583) check_self - checking if
> host==us: 16==9
> > > > && [sip.coptalk.com] == [127.0.0.1]
> > > > Dec 11 16:07:19 sip ser: 8(4583) check_self - checking if port
5060
> > > > matches port 5060
> > > > Dec 11 16:07:19 sip ser: 8(4583) check_self - checking if
> host==us: 16==13
> > > > && [sip.coptalk.com] == [64.189.165.205]
> > > > Dec 11 16:07:19 sip ser: 8(4583) check_self - checking if port
5060
> > > > matches port 5060
> > > > Dec 11 16:07:19 sip ser: 8(4583) request for registration 8(4583)
> > > > check_nonce(): comparing
[3fd907c2aa2d6c72cd666f9109e45155055b2d36] and
> > > >
[3fd907c23a57f75133a55828041f2c9ee7b081c2]
> > > > Dec 11 16:07:19 sip ser: 8(4583) pre_auth(): Invalid nonce value
> received,
> > > > very suspicious !
> > > > Dec 11 16:07:19 sip ser:
> > > > Dec 11 16:07:19 sip ser: '
> > > > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: flags=-1
> > > > Dec 11 16:07:19 sip ser: 8(4583) check_via_address(64.189.165.206,
> > > > 64.189.165.206, 0)
> > > > Dec 11 16:07:19 sip ser: 8(4583) receive_msg: cleaning up
> > > > Dec 11 16:07:19 sip ser: 6(4581) SIP Request:
> > > > Dec 11 16:07:19 sip ser: 6(4581) method: <REGISTER>
> > > > Dec 11 16:07:19 sip ser: 6(4581) uri:
<sip:sip.coptalk.com>
> > > > Dec 11 16:07:19 sip ser: 6(4581) version: <SIP/2.0>
> > > > Dec 11 16:07:19 sip ser: 6(4581) parse_headers: flags=1
> > > > Dec 11 16:07:19 sip ser: 6(4581) end of header reached, state=5
> > > > Dec 11 16:07:19 sip ser: 6(4581) parse_headers: Via found, flags=1
> > > > Dec 11 16:07:19 sip ser: 6(4581) parse_headers: this is the
first via
> > > > Dec 11 16:07:19 sip ser:
6(4581) After parse_msg...
> > > > Dec 11 16:07:19 sip ser: 6(4581) preparing to run routing
scripts...
> > > > Dec 11 16:07:19 sip ser:
6(4581) entering main route 6(4581)
DEBUG :
> > > > is_maxfwd_present: searching
for max_forwards header
> > > > Dec 11 16:07:19 sip ser: 6(4581) parse_headers: flags=128
> > > > Dec 11 16:07:19 sip ser: 6(4581) end of header reached, state=8
> > > > Dec 11 16:07:19 sip ser: 6(4581) DEBUG: get_hdr_field: <To>
[27];
> > > > uri=[sip:Rick@sip.coptalk.com]
> > > > Dec 11 16:07:19 sip ser:
> > > > Dec 11 16:07:19 sip ser: ]
> > > > Dec 11 16:07:19 sip ser: 6(4581) get_hdr_field: cseq <CSeq>:
<8>
> > > <REGISTER>
> > > > Dec 11 16:07:19 sip ser: 6(4581) DEBUG: get_hdr_body :
> content_length=0
> > > > Dec 11 16:07:19 sip ser: 6(4581) found end of header
> > > > Dec 11 16:07:19 sip ser: 6(4581) DEBUG: is_maxfwd_present:
> max_forwards
> > > > header not found!
> > > > Dec 11 16:07:19 sip ser: 6(4581) DEBUG: add_param: tag=1804086518
> > > > Dec 11 16:07:19 sip ser: 6(4581) end of header reached, state=29
> > > > Dec 11 16:07:19 sip ser: 6(4581) parse_headers: flags=256
> > > > Dec 11 16:07:19 sip ser: 6(4581) find_first_route(): No Route
headers
> > > found
> > > > Dec 11 16:07:19 sip ser: 6(4581) loose_route(): There is no
Route HF
> > > > Dec 11 16:07:19 sip ser:
6(4581) check_self - checking if
> host==us: 16==9
> > > > && [sip.coptalk.com] == [127.0.0.1]
> > > > Dec 11 16:07:19 sip ser: 6(4581) check_self - checking if port
5060
> > > > matches port 5060
> > > > Dec 11 16:07:19 sip ser: 6(4581) check_self - checking if
> host==us: 16==13
> > > > && [sip.coptalk.com] == [64.189.165.205]
> > > > Dec 11 16:07:19 sip ser: 6(4581) check_self - checking if port
5060
> > > > matches port 5060
> > > > Dec 11 16:07:20 sip ser: 6(4581) request for registration 6(4581)
> > > > check_nonce(): comparing
[3fd907e3929aea9bad25fbd47b3ea062d9215574] and
> > [3fd907e3929aea9bad25fbd47b3ea062d9215574]
> > Dec 11 16:07:20 sip ser: 6(4581) get_ha1(): no result for user
> > 'Rick(a)coptalk.com'
> > Dec 11 16:07:20 sip ser:
> > Dec 11 16:07:20 sip ser: '
> > Dec 11 16:07:20 sip ser: 6(4581) parse_headers: flags=-1
> > Dec 11 16:07:20 sip ser: 6(4581) check_via_address(64.189.165.206,
> > 64.189.165.206, 0)
> > Dec 11 16:07:20 sip ser: 6(4581) receive_msg: cleaning up
> >
> > _______________________________________________
> > Serusers mailing list
> > serusers(a)lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
> >
>
>
>Saludos
>JesusR.
>
>-------------------------------
>Jesus Rodriguez
>VozTelecom Sistemas, S.L.
>jesusr(a)voztele.com
>http://www.voztele.com
>Tel. 902360305
>-------------------------------
Saludos
JesusR.
-------------------------------
Jesus Rodriguez
VozTelecom Sistemas, S.L.
jesusr(a)voztele.com
http://www.voztele.com
Tel. 902360305
-------------------------------