3 Oct
2003
3 Oct
'03
11:47 p.m.
Is there any Remote-Party-ID header field in outgoing INVITE ? If so
then your gateway/whatever ignores it.
Jan.
On 02-10 15:18, Steve Dolloff wrote:
Any phone that supports caller-id. But I haven't
gotten to work. I'm
seeing the username instead.
Subject: RE: [Serusers] caller-id with raius using sip-rpid
Which phone device should I use to see caller ID
information when using the ATA186?
Alejandro
--- Steve Dolloff <sdolloff(a)noc.dls.net> escreveu: >
At the top of the config I have the following
append_rpid_hf("party=calling;id-type=subscriber;privacy=off;screen=yes"
=== message truncated ===
Yahoo! Mail - o melhor webmail do Brasil
http://mail.yahoo.com.br
statement....
if (method=="INVITE") {
record_route();
if (!radius_www_authorize("")) {
log(1,"radius auth
failure");
www_challenge("voip2.test.net","0");
break;
};
append_rpid_hf();
};
If I call a phone with caller-id and my username is
256, it shows 256 on
the phone, if I call with a username of test, it
shows 4534 on the
handset even though I have the sip-rpid set to 222.
Stephen
Subject: Re: [Serusers] caller-id with raius using
sip-rpid
Retrieving caller-id when users register doesn't
work because REGISTER
messages are processed by the server and the server
generates a reply
only.
What you need is to insert Remote-Party-ID header
field into INVITE
message, to make it work you must authenticate also
INVITE messages.
My guess is that you do not authenticate INVITE
messages and therefore
there is nothing append_rpid_hf can add.
Jan.
On 02-10 11:35, Steve Dolloff wrote:
"@zettou.net>;party=calling;id-type=subscriber;privacy=off;screen=yes");
I want to retrieve the caller-id of a user from
radius when they
register and use it when I redirect an invite
request to the voicemail
system so that the voicemail system can route the
call based on
caller-id. I also want to be able to send it to
the sip gateway when
I
am routing calls to the pstn.
I have this in my config currently and it doesn't
appear to set the
caller-id in the invite message.
rewritehostport("209.242.10.153:5061");
append_rpid_hf();
t_relay();
Subject: Re: [Serusers] caller-id with raius using
sip-rpid
append_rpid_hf has no parameters. Version with 2
parameters is in
unstable branch in the CVS only. What exactly do
you want to do ?
Jan.
On 02-10 11:26, Steve Dolloff wrote:
> I found this example in a previous Serusers
message.
append_rpid_hf("<sip:+",
>
> I tried calling append_rpid_hf();, but it does
nothing.
I also tried
> );
but I get an unknown command presumably
because I am not using
the
> right number of parameters.
>
> I only want to modify the calling-id info.
>
> Can anyone provide an example?
>
> -----Original Message-----
> From: Jan Janak [mailto:jan@iptel.org]
> Sent: Thursday, October 02, 2003 11:09 AM
> To: Steve Dolloff
> Cc: serusers(a)lists.iptel.org
> Subject: Re: [Serusers] caller-id with raius
using sip-rpid
>
> If you want to add Remote-Party-ID header field
then you have to
call
> append_rpid_hf function in your script.
>
> Jan.
>
> On 02-10 11:07, Steve Dolloff wrote:
> > OK, I am setting up a Voicemail system (using
asterisk) and I am
> > currently doing a
rewritehostport(ip:port) and
then trelay() to
send
> it
> > to the voicemail system if an invite fails.
> >
> > Should I change something? See my ser.cfg and
output from the call
to
> > the vm.
> >
> > Here is the code from ser.cfg
> >
> >
> rewritehostport("219.242.10.153:5061");
> > t_relay();
> >
> > Here is the sip info from asterisk.
> >
> > INVITE sip:200@219.242.10.153:5061;user=phone
SIP/2.0
> > Max-Forwards: 10
> > Record-Route:
<sip:200@219.242.10.153;ftag=2236658534;lr=on>
> > Via: SIP/2.0/UDP
219.242.10.153;branch=z9hG4bK13de.31901234.0
> > Via: SIP/2.0/UDP
226.145.234.113:5060;rport=5060
> > From:
sip:test@voip2.test.net;tag=2236658534
> > To: <sip:200@voip2.test.net;user=phone>
> > Call-ID: 2218108971(a)226.145.234.113
> > CSeq: 1 INVITE
> > Contact:
<sip:test@226.145.234.113:5060;transport=udp>
> > User-Agent: Cisco ATA 186 v2.16.2
ata18x
(030909a)
> > Expires: 300
> > Content-Length: 271
> > Content-Type: application/sdp
> >
> >
> >
> > Subject: Re: [Serusers] caller-id with raius
using sip-rpid
> >
> > Remote-Party-ID header field is inserted into
forwarded requests,
not
> > responses.
> >
> > Jan.
> >
> > On 02-10 10:53, Steve Dolloff wrote:
> > > Ser doesn't appear to be passing the
Caller-id to the ata at
auth
or
> I
> > > am doing something wrong. Can anyone point
me in the right
> direction?
> > >
> > > Thanks,
> > >
> > > Stephen
> > >
> > > I have the following entry in my freeradius
users file.
> > >
> > > test(a)voip2.test.net Auth-Type := Digest,
User-Password ==
"test"
> > > Reply-Message =
"Hello, test with
digest", Sip-Rpid =
> > > "8472222222"
> > >
> > > When I run a radclient test I get the
correct info..
> > >
> > > radclient -f digest.test 219.242.10.153:1812
auth testing
> > > Received response ID 134, code 2,
length =
57