Hello,
cn you give output of 'kamailio -V' and the log messages with debug=3 in config file?
Note that from the moment you set the gateway in some state and you dump the list via mi, there can be keepalives that change the state.
Cheers, Daniel
On 12/11/11 3:42 PM, Uri Shacked wrote:
Hi, i tried to change the ds_probing_mode as well. it didn't do any good. i need the probing mode to be set to 1 anyway. so, any ideas? here is the cfg again: after the failure route i turn to this route "route[OSPRPLERR] { xlog("$C(rg) SCRIPT : in OSPRPLERR $ru $C(xx)\n"); if($avp(OSPRPL)!=404) { xlog("$C(rg) OSPRPL is $avp(OSPRPL)*now disable destination* $C(xx)\n"); ds_mark_dst("AP"); xlog("$C(rg) *after disabling destination* $C(xx)\n"); }" here is the log:
13(5760) ERROR: <script>: SCRIPT : in OSPRPLERR sip:36264529@10.10.21.29 mailto:sip%3A36264529@10.10.21.29 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1264 a=17 n=if 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1259 a=26 n=xlog 13(5760) ERROR: <script>: OSPRPL is 408 *now disable destination *13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1260 a=26 n=ds_mark_dst 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1261 a=26 n=xlog 13(5760) ERROR: <script>: *after disabling destination*
now i check the dispatcher list status: kamctl fifo ds_list
SET:: 47 URI:: sip:10.10.21.20 flags=AX priority=25 attrs=OSP_B4 URI:: sip:10.10.21.22 flags=AX priority=25 attrs=OSP_B3 URI:: sip:10.10.21.23 flags=AX priority=25 attrs=OSP_B2 URI:: sip:10.10.21.21 flags=AX priority=25 attrs=OSP_B1 SET:: 41 URI:: sip:10.10.21.29 flags=AX priority=25 attrs=OSP_A4 URI:: sip:10.10.21.27 flags=AX priority=25 attrs=OSP_A3 URI:: sip:10.10.21.25 flags=AX priority=25 attrs=OSP_A1 URI:: sip:10.10.21.24 flags=AX priority=25 attrs=OSP_A2
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users