Hi,
TLS work on TCP 5061
To view the header you can use $ hdr (HEADER_NAME).
Not much English, sorry.
2012/11/29 Kamal Palei <palei.kamal(a)gmail.com>
Dear All
I ma trying to have all SIP signalling through TLS. Using Kamailio 3.1.5.
In a typical setup, endpoints initiates call, messages reach Kamailio
proxy, Kamailio proxy forwards these packets to main proxy.
In Kamailio.cfg, I have added below code.
route {
# per request initial checks
route(REQINIT);
setflag(FLT_NATS);
if(is_method("REGISTER"))
{
t_relay_to("tls:115.114.48.19:443");
exit();
}
else
{
xlog("incoming request\n");
route(WITHINDLG);
route(RTPPROXY);
t_on_reply("REPLY_ONE");
t_on_failure("FAIL_ONE");
t_relay_to("tls:115.114.48.19:443");
exit();
}
..............
I am finding most of the messages are getting transmitted in TLS. But few
ACK and REFER / REFER response packets are still being transported in UDP.
Can somebody tell me whats the wrong I am doing here.
By any chance
route(WITHINDLG);
route(RTPPROXY);
before t_relay_to("tls:115.114.48.19:443");
can cause this ????
And one more doubt.., 115.114.48.19 I get in route header. How can I
extract the value of route header, so that I do not have to hard-code
Many thanks in advance.
-kamal
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
*Freddy Condori Chura
Ingeniero Civil en Computación e Informática
Magister en Ingeniería de Software*