[Serusers] change info in message status

Hi, to connect LCS my pstn gateway through SER I have to change from sip:user1@pdc.local.aastra.net to from sip:user1@192.168.1.108 when I receive the status eg 180 ringing I have to make the reverse operation. For that I think I have to use t_on_reply("1"); onreply_route[1] {...} But I never go onreply_route[1]. I am wrong but don't understand why. Here after my ser.cfg file. Thanks for help, Alexis # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=no #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/exec.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" #Modif ADE chargement module loadmodule "/usr/local/lib/ser/modules/textops.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; #ajout alexis external parsing for alaexis.debreu(a)aastra.net if (method=="INVITE") { if (uri=~"^sip:[a-zA-Z\.]@*") { log (1, "got mail format uri lookup for tel number\n"); exec_dset ("/usr/local/etc/ser/siplookup"); }; rewritehostport("192.168.1.109"); replace ("<sip:user1@pdc.local.aastra.net>", "<sip:user1@192.168.1.108>"); t_relay_to_udp("192.168.1.109","5060"); }; t_on_reply("1"); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("sip.pdc.local.aastra.net", "subscriber")) { www_challenge("sip.pdc.local.aastra.net", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } onreply_route[1] { log (1, "got msg from Nexpan on reply\n"); } __________________________________________________________________ Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/