6 Jul
2005
6 Jul
'05
10:06 a.m.
That part works fine, but when using is_user_in I need to match the
From, To in the grptable which only contains my 040600 aliases, as
opposed to 0845, maybe I should match the R-URI
Iqbal
Stuart Kirkwood - Jubilee Consultancy Limited wrote:
I use aliases to map external numbers to my internal
numbers. In your
example I would create an alias for 08450040600 that directs the call to
040600. Then when an external call comes in and you do a lookup("aliases")
in ser.cfg your ruri is set to the internal number and your other processing
should then work.
Regards
Stuart
-----Original Message-----
From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On
Behalf Of Iqbal
Sent: 06 July 2005 14:30
To: Steve Blair
Cc: serusers(a)lists.iptel.org
Subject: Re: [Serusers] call routing problem
but wouldnt that then be avoiding the mapping of 0845xxx to 040600
instead, i.e bypassing it,
Steve Blair wrote:
Can your gateway strip digits? If so use
translation rules to strip the
prefix from the called party number.
Iqbal wrote:
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
.
Hi
I am mapping external numbers to internal ones in a db, eg
08450040600 maps to 040600
So when a call comes from pstn to 08450040600 it hits the ip phone on
040600, all well and good.
Now what I am testing is deploying asterisk for other features like
call pickup and all. I have managed to create separate contexts in
asterisk based on company ID (i.e virtual PBX) assigned from a DB.
And when a call from IP phone A (company id =cid=500) calls out the
call goes via ser (thats where all IP phones are registered) to
asterisk, and then out to ser --->pstn (was gonna go out via asterisk
- pstn, but decided to keep it all within ser). This is fine, because
asterisk is in the loop.
Now what I need is for inbound calls to that IP phone to also be
routed into asterisk, and then to ser and to the ipphone, that way I
pull all calls for each company into a asterisk context for all its
pbx functionality.
The problem is that when 0845 is called from pstn, I cant setflag on
it, using is_user_in, since From = pstn dialing number, and To =
4408450040600, and not 040600, any ideas on what I can match on so
that I can set the correct flag and divert to asterisk.
Iqbal
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers