Re: [Users] Please help me to fix openser.cfg (rewritehostport)

I am not sure what do you want to achieve, but I assume it should be before lookup("aliases");

Cheers, Daniel

On 10/12/06 17:01, Ronald Wiplinger wrote:

I try to rewritehostport to my Asterisk box with all starting numbers with 6. The xlog never shows anything.

    if (method=="INVITE") {
         if (uri=~"^sip:6.+@") {
               rewritehostport("xx.xx.xx.xx:5060");
                           xlog("L_ERR", "transfer to Asterisk");
               route(1);
               exit;
        };
    };

I believe I did not put it at the right place. Below is my entire openser.cfg. Can you please tell me, where above paragraph should be? Other parts maybe also not in the right order.

bye

Ronald Wiplinger

# # $Id: openser.cfg,v 1.6 2006/02/15 18:23:46 bogdan_iancu Exp $ #

debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) log_facility=LOG_LOCAL7 log_name="Taipei-openser"

check_via=no # (cmd. line: -v) dns=no # was no (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/openser_fifo"

mpath="/usr/local/lib64/openser/modules/" loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "nathelper.so" loadmodule "xlog.so" loadmodule "enum.so" loadmodule "acc.so" loadmodule "auth.so" loadmodule "auth_db.so" modparam("usrloc|auth_db","db_url","mysql://shshshsh:shhhhrw@localhost/wodeopenser") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("registrar", "sip_natping_flag", 7) modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("rr", "enable_full_lr", 1) modparam("nathelper", "rtpproxy_sock", "udp:xx.xx.xx.xx:22222") # default port 22222 #modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock") modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "sipping_from", "sip:xx.xx.xx.xx") modparam("enum", "domain_suffix", "e164.org.") modparam("enum", "tel_uri_params", ";npdi")

# ------------------------- request routing logic -------------------

# main routing logic

route{ xlog("L_ERR", "request method: [$rm], from URI: [$fu], To URI: [$tu]"); if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; };

if (msg:len >=  4096 ) {
    sl_send_reply("513", "Message too big");
    exit;
};

   # 

---

# NAT detection
   # 

---

route(2);


   # 

---

# if you want to make ENUM work with numbers starting with "00",
# use the following to convert "00" it into a "+"
   # 

---

if (uri=~"^sip:00[1-9][0-9]*@") {                 strip(2);
    prefix("+");
};
if (uri=~"sip:\+[0-9]+@") {                          

if(!enum_query("e164.arpa.") && !enum_query("e164.org.") && !enum_query("e164.info.") && !enum_query("enum.org.")) { xlog("L_ERR", "Invalid enum? $uri Route to PSTN"); }; xlog("L_ERR","we matched just number $tu"); strip(1); # remove + t_relay(); exit; }; #

---

if (!method=="REGISTER")
    record_route();

if (loose_route()) {
    # mark routing logic in request
    append_hf("P-hint: rr-enforced\r\n");         route(1);
};

# -----------------------------------------------------------------
# Call Type Processing Section
# -----------------------------------------------------------------
if (!uri==myself) {
    route(1);
};

# -----------------------------------------------------------------
if (uri==myself) {

    if (method=="REGISTER") {
        if (!www_authorize("taipei.example.net", "subscriber")) {
            www_challenge("taipei.example.net", "0");
            exit;
        };

        if (isflagset(5)) {
        setflag(6);
        };

        save("location");
        exit;
    };

    lookup("aliases");
    if (!uri==myself) {
        append_hf("P-hint: outbound alias\r\n");             

route(1); };

    if (!lookup("location")) {
        sl_send_reply("404", "Not Found");
        exit;
    };
    append_hf("P-hint: usrloc applied\r\n");
    if (method=="INVITE") {
         if (uri=~"^sip:6.+@") {
               rewritehostport("xx.xx.xx.xx:5060");
                           xlog("L_ERR", "transfer to Asterisk");
               route(1);
               exit;
        };
    };     };

route(1);

}

route[1] { if (subst_uri('/(sip:.*);nat=yes/\1/')){ setflag(6); };

if (isflagset(5)||isflagset(6)) {
route(3);
}
if (!t_relay()) {
    sl_reply_error();
};
exit;

}

route[2]{ force_rport(); if (nat_uac_test("19")) { if (method=="REGISTER") { fix_nated_register(); } else { fix_nated_contact(); }; setflag(5); }; }

route[3] { if (is_method("BYE|CANCEL")) { unforce_rtp_proxy(); } else if (is_method("INVITE")){ force_rtp_proxy(); t_on_failure("1"); }; if (isflagset(5)) search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes'); t_on_reply("1"); }

failure_route[1] {
if (isflagset(6) || isflagset(5)) {
    unforce_rtp_proxy();
}

}

---

Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users