21 Jan
2008
21 Jan
'08
6:28 p.m.
Hi there,
Have you checked the new config file that was uploaded for OpenSER 1.2.3 ??
Regards,
Bogdan
A.smith wrote:
Hi Moujane,
In case you haven´t worked it out yet, I managed to get an openser.cfg to
work for simple testing between XLite or other SIP client. Its a shame there
isnt a working config easily findable on the openser site or other internet
resource for those people new to SIP and OpenSER.... :S
Try this, for me it works on OpenSER 1.2.2
# SECTION 1 - GLOBAL DEFINTIONS
debug=3
fork=yes
log_stderror=no
#fork=no
#log_stderror=yes
listen=10.10.10.10 #put your server IP here
port=5060
disable_dns_blacklist=yes
dns=no
rev_dns=no
children=4
# SECTION 2 - MODULE DEFINTION
mpath="/usr/local/lib/openser/modules"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "textops.so"
loadmodule "xlog.so"
loadmodule "registrar.so"
# SECTION 3 - MODULE CONFIGURATION
modparam("usrloc", "db_mode", 0)
modparam("rr", "enable_full_lr", 1)
# main routing logic FOR RADIUS ACC ACCOUNTING
route{
if (!mf_process_maxfwd_header("15")) {
sl_send_reply("483","Too Many Hops");
exit;
};
if (msg:len >= max_len ) {
sl_send_reply("513", "Message too big");
exit;
};
if (method=="REGISTER") {
record_route();
if (!save("location")) {
sl_reply_error();
};
exit;
};
if (loose_route()) {
append_hf("P-hint: rr-enforced\r\n");
route(1);
};
if (!uri==myself) {
append_hf("P-hint: outbound\r\n");
route(1);
};
if (uri==myself) {
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
exit;
};
append_hf("P-hint: usrloc applied\r\n");
};
route(1);
}
# SECTION 5 - SECONDARY ROUTE BLOCKS
route[1] {
if (!t_relay()) {
sl_reply_error();
};
exit;
}
________________________________________________
Message sent using UK Grid Webmail 2.7.9
_______________________________________________
Users mailing list
Users(a)lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users