Hi all,
Yes, I am trying to do it but late. Because the system is in working and I can't stop it. Today I only finished preparing a testing system.
Wangji 12/3/03
--- Jan Janak jan@iptel.org wrote:
Please send us SIP message dumps. You can make them by ngrep or ethereal.
Jan.
On 01-12 02:04, jimmy way wrote:
Jaime, I have do it, buf still fail. By the way, I really want to see the SIP packets
SER
sended, recieved and the packets after changed. maybe can see what wrong with it. But I can't do
it.
Wangji --- jaime.gil@orange.co.uk wrote:
Wangji,
Not sure, but normally you need to force_rport
and
fix_nated_contact at registration, before you save to DB.
Jaime
From: jimmy way jimway71@yahoo.com on
01/12/2003
04:15
To: serusers@lists.iptel.org cc:
Subject: Re: [Serusers] nathelper question
I use Ser verion 0.8.12-0 (rpm). System use redhat linux 7.2 --- jimmy way jimway71@yahoo.com wrote:
Hi all, The problem is I can't register two SIP UAs
to
SER server.
This is my environment: Internet | router (X.X.X.163) | |Fiber |---- Ser server (X.X.X.166) | | Switch------|---- Trunk Gateway (X.X.X.167) | |---- Other servers | |---- Router( cisco 26xx)
(X.X.X.163)
| Switch | _____________________|_________________ Users SIP UA1(172.16.2.11) SIPUA2(172.16.2.23)
My ser.cfg like: route{ if ( msg:len > max_len ) {
sl_send_reply("513", "Messagetoo
big"); break; }; record_route(); if (loose_route()) { t_relay(); break; };
if (!method=="BYE") { force_rport(); fix_nated_contact(); };
if (method=="REGISTER") { if (!www_authorize("novsky.com","subscriber")) {
www_challenge("novsky.com",
"1"); break; }; save("location"); break; };
if (method=="INVITE") {if(!proxy_authorize("novsky.com","subscriber")) {
proxy_challenge("novsky.com","1"); break; }; };
if(uri=~"^sip:6169[0-9]*@[0-9|\.]*"){
if(!lookup("location")) { sl_send_reply("404","Not
Found"); break; }; }else { forward(172.16.255.2,6050); break; }; if (!t_relay()) { sl_reply_error(); }; } I use ethereal to look the packet, first UA1
send
REGISTER to SER server, on NAT it use 5060
port,
and
SER return to corrent address/port. When UA2 send REGISTER to SER server, on NAT
it
use
1027 port, but SER return to NAT:5060 port and
the
packet transfered to UA1. So UA2 can't register. I can see the NAT table on route, like udp x.x.x.165:5060 172.16.2.11:5060
x.x.x.165:5060
x.x.x.x.165:5060 udp x.x.x.165:5060 172.16.2.23:5060
x.x.x.165:1025
x.x.x.x.165:1025
Wangji 12/1/03
Do you Yahoo!? Protect your identity with Yahoo! Mail
AddressGuard
Serusers mailing list serusers@lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
Do you Yahoo!? Protect your identity with Yahoo! Mail
AddressGuard
http://antispam.yahoo.com/whatsnewfree
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
*******************************************************************************
Important. Confidentiality: This communication is intended
for
the above-named person and may be confidential and/or legally privileged.
Any
opinions expressed in this communication are not necessarily those of the
=== message truncated ===
__________________________________ Do you Yahoo!? Protect your identity with Yahoo! Mail AddressGuard http://antispam.yahoo.com/whatsnewfree