Daniel, just a quick Q.
When you replace something on the Body using these module's functions, the Content-Length value is recalculated?
Thanks, Uriel
On Thu, Apr 23, 2009 at 12:58 PM, Daniel-Constantin Mierla < miconda@gmail.com> wrote:
On 04/23/2009 03:05 PM, Juan Perez wrote:
actually I found out what the prob was, the call was not taking the route
where that piece of code is and that is why it was not replacing the character.
I fixed it and it works perfect.
ok, sounded very strange from first place, for a function that is pretty old and quite used. Thanks for reporting back.
Cheers, Daniel
thank you all jp
----- Original Message ---- From: Daniel-Constantin Mierla miconda@gmail.com To: Juan Perez jperezsip2008@yahoo.com Cc: kamailio users@lists.kamailio.org Sent: Thursday, April 23, 2009 4:23:40 AM Subject: Re: [Kamailio-Users] textops usage
Hello,
On 04/21/2009 05:07 PM, Juan Perez wrote:
Hello
I am receiving the SDP from a provider with this format: g729/8000/1,
which I interpret as codec g729, sampling rate 8000 and the number of channels is 1.
The calling party [linksys pa2p] apparently does not like the "1" and
terminates the call.
I want to strip it using textops module and pass back the SDP w/o the
"1" and do this in the On_Reply and the Route sections:
if (search_body("g729/8000/1")) { xlog("L_INFO","mylog: On Reply 1 section. Found thestring.\n");
replace_body("g729/8000/1","g729/8000"); }just as note, you can do just replace_body(), now you do two times
search.
but it can not even find it. Is leaving me with several questions: 1- is the "re" that I am using right? 2- Do I have to escape the "/"? 3- does the replace and search function go "deep" enough in the SDP?
I had not time to test your snippet and see what is wrong, try with other flavors from textops: replace_body_all() or subst_body().
Cheers, Daniel
-- Daniel-Constantin Mierla http://www.asipto.com/
Kamailio (OpenSER) - Users mailing list Users@lists.kamailio.org http://lists.kamailio.org/cgi-bin/mailman/listinfo/users http://lists.openser-project.org/cgi-bin/mailman/listinfo/users