Re: [Serusers] problem with loading compiled radius modules

Hello,

set fork=no and log_stderror=yes and try to start the server. It should tell you where the problem is. After you resolve the problem, change it back. ser uses syslog if log_stderror is set to no.

regards, Jan.

On 14-02 11:26, Yang Xiang wrote:

Hi Jan,

I have successfully compiled the radius modules radius_acc.so and radius_auth.so. But when I try to load the both modules ser tells me:

ERROR: bad config file (2 errors)

I use the solaris binary package from iptel and have compiled myself only the both radius modules. Is there any incompability? How can I get mor debug information?

Regards,

Yang

My config file:

debug=7 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database #loadmodule "/usr/local/lib/ser/modules/mysql.so"

loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/radius_acc.so" loadmodule "/usr/local/lib/ser/modules/radius_auth.so"

# Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/local/lib/ser/modules/auth.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2)

# -- auth params -- # Uncomment if you are using auth module # #modparam("auth", "secret", "alsdkhglaksdhfkloiwr") #modparam("auth", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth", "password_column", "password")

# ------------------------- request routing logic -------------------

# main routing logic alias="pix-demo.fhg.de"

route{

    # initial sanity checks -- messages with
    # max_forwars==0, or excessively long requests
    if (!mf_process_maxfwd_header("10")) {
            sl_send_reply("483","Too Many Hops");
            break;
    };
    if (len_gt( max_len )) {
            sl_send_reply("513", "Message too big");
            break;
    };

    # Do strict routing if pre-loaded route headers present
    rewriteFromRoute();

    # if the request is for other domain use UsrLoc
    # (in case, it does not work, use the following command
    # with proper names and addresses in it)
    if (uri==myself) {

            if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication # if (!www_authorize("iptel.org", "subscriber")) { # www_challenge("iptel.org", "0"); # break; # };

                    save("location");
                    break;
            };

            # native SIP destinations are handled using our USRLOC DB
            if (!lookup("location")) {
                    sl_send_reply("404", "Not Found");
                    break;
            };
    };
    # forward to current uri now
    if (!t_relay()) {
            sl_reply_error();
    };

}