12 Apr
2005
12 Apr
'05
10:11 a.m.
Greger,
I agree you for acc module and nat you help me.
I read documentation on www.onsip.org for Nat.
Tell me what's wrong in my ser.cfg
I compiled rttproxy, ser, write ser.cfg for nat from
onsip.org.
Harry
--- "Greger V. Teigre" <greger(a)teigre.com> a écrit :
=== message truncated
===
__________________________________________________________________
Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails !
Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/
Dear Iantcho,
A group of SER users are trying to establish a
baseline of understanding, as
well as create a set of well-proven configuration
files with explanation. We
do this through a document called SER - Getting
Started, which can be found
at http://onsip.org/. The document is under
development, but we address NAT,
both from a conceptual and practical point of view.
If people base their configs on those templates,
it will be a lot easier
to help people, because the starting point (both in
knowledge and
configuration file structure/content) will be known.
g-)
PS!
Don't worry about Harry's comment below, I'm not
sure if he at all
bothered to register to get the Getting Started
document. I have also
posted responses to his requests for help five
times. However, he did not
start out with the ONsip.org Getting Started
configuration file and insisted
on getting help without even trying to copy the
recommended configuration
for nathelper/rtpproxy into his own.
harry gaillac wrote:
:------------------->>>>>>>>><<<<<<<<<<<--------------------
Hello,
I have the same troubles with ser+rtpproxy.
I think of you'll waste time because of
rtpproxy+ser
documention is bad.
I looked at www.onsip.org in order to find help
about
NAT without success but you can waste time to
send
help to serusers mailing list.
We can read some nat troubles in mailing list
every
week.
I do hope you'll find help.
Regards
Harry
--- Iantcho Vassilev <ianchov(a)gbg.bg> a écrit :
> Hello, guys!
>
> Here is my situation:
>
> I have 2 ADSL at home:
>
> I have set up a linux(debian) SER +RTPPROXY on of
> the ADSL
> and i use the other Adsl for internet
> here:
> me ----> 192.168.0.xx(SER with two ethernet int)
>>
> 192.168.0.x(default gateway)
>>
> internet
>
> I`m using Xphone-Lite.
> I would like to contact another person registered
on
> the outside interface of Ser(i`m registering
from
> the interior).
> Internet IP <---> outside
> interface(SER)(lan)<---->me
> But that`s not working
> What`s should be the mistake(from sipsak i got:
> from the internet user: sipsak -s
> sip:adress_registered_from_lan@myADLShere
> returns my other ADSL line.
> and from sipsak -s
> sip:internet_number_user@myADSLhere i got
> sip:internet_number_user@HIS_IP_ADDRESS
>
>
> rttproxy is isntalled(build from cvs this
morning)
SER.cfg is
>
> # ----------- global configuration parameters
> ------------------------
>
> debug=3 # debug level (cmd line:
> -dddddddddd)
> fork=yes
> log_stderror=no # (cmd line: -E)
>
> #/* Uncomment these lines to enter debugging mode
> #debug=7
> #Fork=no
> #log_stderror=yes
> #*/
>
> check_via=no # (cmd. line: -v)
> dns=no # (cmd. line: -r)
> rev_dns=no # (cmd. line: -R)
> port=5060
> #Listen=83.228.8.112
> children=2
> fifo="/tmp/ser_fifo"
>
> # ------------------ module loading
> ----------------------------------
>
> # Uncomment this if you want to use SQL database
> #loadmodule "/usr/lib/ser/modules/mysql.so"
> loadmodule "/usr/lib/ser/modules/textops.so"
> loadmodule "/usr/lib/ser/modules/sl.so"
> loadmodule "/usr/lib/ser/modules/tm.so"
> loadmodule "/usr/lib/ser/modules/rr.so"
> loadmodule "/usr/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/lib/ser/modules/usrloc.so"
> loadmodule "/usr/lib/ser/modules/registrar.so"
> loadmodule "/usr/lib/ser/modules/nathelper.so"
>
> #loadmodule "/usr/lib/ser/modules/domain.so"
> #loadmodule "/usr/lib/ser/modules/mediaproxy.so"
> # Uncomment this if you want digest
authentication
> # mysql.so must be loaded !
> #loadmodule "/usr/lib/ser/modules/auth.so"
> #loadmodule "/usr/lib/ser/modules/auth_db.so"
>
> # ----------------- setting module-specific
> parameters ---------------
>
> # -- usrloc params --
>
> modparam("usrloc", "db_mode", 0)
> modparam("registrar", "nat_flag", 6)
> modparam("nathelper", "natping_interval", 60)
> modparam("nathelper", "ping_nated_only", 1)
> # Uncomment this if you want to use SQL database
> # for persistent storage and comment the previous
> line
> #modparam("usrloc", "db_mode", 2)
>
> # -- auth params --
> # Uncomment if you are using auth module
> #
> #modparam("auth_db", "calculate_ha1", yes)
> #
> # If you set "calculate_ha1" parameter to yes
(which
> true in this config),
> # uncomment also the following parameter)
> #
> #modparam("auth_db", "password_column",
"password")
>
> # -- rr params --
> # add value to ;lr param to make some broken UAs
> happy
> modparam("rr", "enable_full_lr", 1)
>
> # ------------------------- request routing
logic
> -------------------
>
> # main routing logic
> route{
>
> # initial sanity checks -- messages with
> # max_forwards==0, or excessively long
> requests
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many
> Hops");
> break;
> };
> if (msg:len >= max_len ) {
> sl_send_reply("513", "Message too
> big");
> break;
> };
>
> # !! Nathelper
> # Special handling for NATed clients;
first,
> NAT test is
> # executed: it looks for via!=received
and
> RFC1918 addresses
> # in Contact (may fail if line-folding is
> used); also,
> # the received test should, if completed,