Send me all columns, please.
Jan.
On 21-01 08:50, Madan wrote:
here is the radacct table which records the accounting, let me know if you need other details
+---------------------+---------------------+ | AcctStartTime | AcctStopTime | +---------------------+---------------------+
2004-01-19 18:11:48 | 0000-00-00 00:00:00 | | 2004-01-19 18:11:48 | 0000-00-00 00:00:00 | | 2004-01-19 18:12:01 | 2004-01-19 18:12:01 | | 2004-01-19 18:12:19 | 2004-01-19 18:12:19 | | 2004-01-20 18:43:14 | 0000-00-00 00:00:00 | | 2004-01-20 18:43:15 | 0000-00-00 00:00:00 | | 2004-01-20 18:43:53 | 2004-01-20 18:43:53 |
----- Original Message ----- From: "Jan Janak" jan@iptel.org To: "Madan" madan.r@net4india.net Cc: serusers@lists.iptel.org Sent: Tuesday, January 20, 2004 9:18 PM Subject: Re: [Serusers] ser/radius accounting not happening
Could you post some examples of start and stop records with the same time ?
Jan.
On 17-01 08:35, Madan wrote:
Hi List, I 'am facing a problem with ser/radius configuration which is working
fine except for the accounting part. In freeradius accounting details I see that both start and stop time is same, can somebody help me on how to fix this.
here is my ser.cfg
# # ----------- global configuration parameters ------------------------ debug=9 # debug level (cmd line: -dddddddddd) fork=no log_stderror=yes # (cmd line: -E) listen=10.0.0.1 /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" loadmodule "/usr/local/lib/ser/modules/group_radius.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
modparam("usrloc", "db_mode", 2) modparam("auth_radius",
"radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
#modparam("auth_radius", "service_type", 15)
# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("acc", "log_level", 1) modparam("acc", "radius_flag", 1)
# ------------------------- request routing logic ------------------- # main routing logic
route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; };
# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing # t_relay(); # break; # };
if (loose_route()) {
if (method=="BYE" || method=="CANCEL") { log (1, "BYE or CANCEL\n"); setflag(1); }; t_relay(); break;};
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it)
if (method=="REGISTER") { log(1, "REGISTER: Authenticating user\n"); if (!radius_www_authorize("")) { log(1, "REGISTER: challenging user\n"); www_challenge("", "0"); break; }; save("location"); break; };############################################################################ ##############################
if (uri=~"^sip:44[127][0-9]+@.*$") { if (rewritehostport("10.0.0.8:5060")) { if (!t_relay()) { sl_reply_error(); }; } else { sl_reply_error (); }; break; } else if (method=="INVITE") { sl_send_reply("403", "Call cannot be served here"); }; # account completed transactions via syslog setflag(1);############################################################################ ###################################
if (method=="INVITE") { log(1, "INVITE\n"); setflag(1); /* set for accounting (the same value as inlog_flag!) */ };
if (method=="MESSAGE") { log(1, "MESSAGE\n"); setflag(1); /* set for accounting (the same value as inlog_flag!) */ };
if (method=="BYE" || method=="CANCEL") { log (1, "BYE or CANCEL\n"); setflag(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; if (!t_relay()) { sl_reply_error(); break; };}
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers