13 Dec
2016
13 Dec
'16
11:18 a.m.
Hi Daniel,
It only works as expected when i set the first parameter in function
t_set_fr greater than 0.
I don't know if it helps to understand the issue but I have a kamailio
acting as load balancer in front of my 2 "proxy/register" servers (also
built in kamailio), this LB is replying always with "100 - trying" to the
INVITES sent from proxy/register.
Thank you
José
2016-12-09 10:34 GMT+00:00 Daniel-Constantin Mierla <miconda(a)gmail.com>om>:
Hello,
hmm, strange -- so you say that in some cases when 100 is received the
expiration timer works as expected, other times not?
I am trying to identify a pattern of the situation, because there is
nothing obvious I could spot being wrong.
Cheers,
Daniel
On 08/12/2016 19:33, José Seabra wrote:
Hello Daniel,
In all situations it receives 100, I can do more different tests if do you
need to know what is behavior, even i can make a test without receive 100.
Than you
Regards
Em 08/12/2016 14:58, "Daniel-Constantin Mierla" <miconda(a)gmail.com>
escreveu:
--
Cumprimentos
José Seabra
Hello,
in the other cases when you say it works, do you receive the 100?
Cheers,
Daniel
On 08/12/2016 12:26, José Seabra wrote:
Hi Daniel,
Yes I get 100 Trying.
Thank you
Regards
José
2016-12-08 7:58 GMT+00:00 Daniel-Constantin Mierla <miconda(a)gmail.com>om>:
Daniel-Constantin Mierlawww.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
Hello,
do you get any 1xx response after sending out the request?
Cheers,
Daniel
On 07/12/2016 21:11, José Seabra wrote:
Hi Daniel,
Yes if I omit the first parameter it works, and if I configure other
value than 0 on first parameter it only enters on failure route after
expire the value configured on first parameter, for example;
I i set t_set_fr(10000,2000), call will only enter in failure route
after 10000 miliseconds.
This behavior is very weird, it only appends when i send the INVITE to
the AOR.
But maybe is something that I'm doing wrong before this route within my
kamailio script, anyway i'm still looking for the possible causes inside of
my script.
Once again, thank you for your great help.
Regards
José
2016-12-07 9:48 GMT+00:00 Daniel-Constantin Mierla <miconda(a)gmail.com>om>:
Cumprimentos
José Seabra
--
Daniel-Constantin Mierlawww.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
-- Hello,
I haven't found any error message related to tm in the logs you
attached.
You say that if you omit the first parameter, everything works ok? Can
you try to set the first parameter to a non-zero value?
Cheers,
Daniel
On 06/12/2016 16:45, José Seabra wrote:
Hello Daniel,
Yes, i have attached this in this email, please checkout.
Regarding to t_set_fr() function, i use it in several places within my
kamailio scripts without any issue, I only noticed this behavior on this
particular case.
I don't if this can be relevant but I have tested t_set_fr function
with the following parameters => t_set_fr(,2000) and it entered on failure
route after 2 seconds.
Let me know if do you need anything else.
Thank you
José Seabra
2016-12-06 13:26 GMT+00:00 Daniel-Constantin Mierla <miconda(a)gmail.com>
:
> Hello,
>
> any error log messages? Any other t_set_fr() in your config file that
> may be executed?
> Cheers,
> Daniel
>
>
> On 06/12/2016 12:01, José Seabra wrote:
>
> Hello there,
> I'm using t_set_fr(0,2000) on calls to registered phones but by any
> reason this isn't working, the call only enters on the failure route after
> 30 seconds in case of no response from SBC/Phone, anyone has any idea what
> can be the reason for that?
>
> if(lookup("location")) {
> xlog("L_INFO", "routing to registered phone
> ruid=$ruid R=$ru - ID=$ci \n");
> t_set_fr(0, 2000);
> t_on_failure("ASBC_FAILURE");
> t_on_branch("ASBC_BRANCH");
> route(RELAY);
> exit;
> }
>
> My RELAY route:
> route[RELAY] {
>
> # enable additional event routes for forwarded requests
> # - serial forking, RTP relaying handling, a.s.o.
> if (is_method("INVITE|BYE|SUBSCRIBE|UPDATE"))
> {
> if(!t_is_set("branch_route"))
> t_on_branch("MANAGE_BRANCH");
> }
> if (is_method("INVITE|SUBSCRIBE|UPDATE"))
> {
> if(!t_is_set("onreply_route"))
> t_on_reply("MANAGE_REPLY");
> }
> if (is_method("INVITE"))
> {
> if(!t_is_set("failure_route"))
> t_on_failure("MANAGE_FAILURE");
> }
>
> if (!t_relay())
> {
> sl_reply_error();
> }
> exit;
> }
>
> version: kamailio 4.4.2 (x86_64/linux)
>
> Thanks
>
> --
> Cumprimentos
> José Seabra
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
> --
> Daniel-Constantin Mierlawww.twitter.com/miconda -- www.linkedin.com/in/miconda
> Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
>
> _______________________________________________ SIP Express Router
> (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users(a)lists.sip-router.org http://lists.sip-router.org/cg
> i-bin/mailman/listinfo/sr-users
--
Cumprimentos
José Seabra
--
Daniel-Constantin Mierlawww.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
--
Cumprimentos
José Seabra
--
Daniel-Constantin Mierlawww.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
--