Re: [SR-Users] TCP SYN only

Yes I set tcp_max_connections=104096 Laurent *De :*Daniel-Constantin Mierla [mailto:miconda@gmail.com] *Envoyé :* mardi 9 septembre 2014 15:09 *À :* Laurent Schweizer; Kamailio (SER) - Users Mailing List *Objet :* Re: [SR-Users] TCP SYN only Hello, have you increased the max connections limit? - http://www.kamailio.org/wiki/cookbooks/devel/core#tcp_max_connections The PKG_MEM_POOL_SIZE is more or less same as -m parameter, so you don't need to change the sources if you need higher value. Cheers, Daniel On 09/09/14 14:57, Laurent Schweizer wrote: Hi, Yes I check them, the only 2 point that I have actually not tested is to change : - You might have to decrease TCP_BUF_SIZE to a smaller value (e.g 8K) - You might want to increase PKG_MEM_POOL_SIZE (for large queues) I’m using Kamailio 3.2.1 I have set: tcp children to 50 tcp_max_connections=104096 started wit -m 4096 -M 64 with sockstat I have: sockets: used 2171 TCP: inuse 913 orphan 1 tw 4 alloc 939 mem 29 UDP: inuse 440 mem 372 UDPLITE: inuse 0 RAW: inuse 1 FRAG: inuse 0 memory 0 BR Laurent *De :*sr-users-bounces@lists.sip-router.org <mailto:sr-users-bounces@lists.sip-router.org> [mailto:sr-users-bounces@lists.sip-router.org] *De la part de* Daniel-Constantin Mierla *Envoyé :* mardi 9 septembre 2014 14:46 *À :* Kamailio (SER) - Users Mailing List *Objet :* Re: [SR-Users] TCP SYN only Hello, have you checked the file in the sources located at doc/tcp_tunning.txt? Cheers, Daniel On 09/09/14 14:40, Laurent Schweizer wrote: Dear all, Since few weeks I have more and more TCP issue, I can see that sometimes the client send a TCP SYN but never get any response. 106.123315 62.12.179.104 -> X.X.X.X TCP 39174 > sip [SYN] Seq=0 Win=4380 Len=0 MSS=1380 TSV=4294942209 TSER=0 WS=1 109.124384 62.12.179.104 -> X.X.X.X TCP 39174 > sip [SYN] Seq=0 Win=4380 Len=0 MSS=1380 TSV=4294942510 TSER=0 WS=1 111.202946 62.12.179.104 -> X.X.X.X TCP 4993 > sip [SYN] Seq=0 Win=4380 Len=0 MSS=1380 TSV=4294942717 TSER=0 WS=1 114.204707 62.12.179.104 -> X.X.X.X TCP 4993 > sip [SYN] Seq=0 Win=4380 Len=0 MSS=1380 TSV=4294943018 TSER=0 WS=1 I have found on internet many doc regarding TCP and max connection issue and I have already done change in sysctl (see below) to increase the number of tcp connection but seems still not ok. Any idea ? Best regards Laurent /net.ipv4.ip_forward = 0/ /net.ipv4.conf.default.rp_filter = 1/ /net.ipv4.conf.default.accept_source_route = 0/ /kernel.sysrq = 0/ /kernel.core_uses_pid = 1/ /net.ipv4.tcp_syncookies = 0/ /net.bridge.bridge-nf-call-ip6tables = 0/ /net.bridge.bridge-nf-call-iptables = 0/ /net.bridge.bridge-nf-call-arptables = 0/ /kernel.msgmnb = 65536/ /kernel.msgmax = 65536/ /kernel.shmmax = 68719476736/ /kernel.shmall = 4294967296/ /net.ipv4.tcp_timestamps = 1/ /net.ipv4.tcp_fin_timeout = 30/ /net.ipv4.tcp_keepalive_time = 1200/ /net.ipv4.tcp_max_syn_backlog = 8192/ /net.ipv4.tcp_max_tw_buckets = 5000/ /fs.file-max = 2097152/ /net.ipv4.ip_local_port_range = 2000 65535/ /net.ipv4.tcp_max_tw_buckets = 1440000/ /net.ipv4.tcp_tw_recycle = 1/ /net.ipv4.tcp_tw_reuse = 1/ /net.core.somaxconn = 65536/ /net.core.netdev_max_backlog = 65536/ _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> -http://www.linkedin.com/in/miconda Next Kamailio Advanced Trainings 2014 -http://www.asipto.com Sep 22-25, Berlin, Germany -- Daniel-Constantin Mierla http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> -http://www.linkedin.com/in/miconda Next Kamailio Advanced Trainings 2014 -http://www.asipto.com Sep 22-25, Berlin, Germany