Re: [Serusers] global contact list

Hello! Thanks for your answer again, and I'm sorry for the delayed answer, but I was out of office. I attached my config file. My biggest problem is, that I don't know, what I should see :-(. I have an eyeBeam window, that contains the "Calls & Conntats" parameters. In this window I can see my (user) contact list, but I didn't see the global one. For example (the PC is my user contact list): -PC -105 -12345 -barta and it is working fine, but I can not see here (in this window) the global one: sip:~# cat /var/www/xcap-root/rls-services/global/index <?xml version="1.0" encoding="UTF-8"?> <rls-services> <service uri="sip:bartaj-list@test.intra"> <list name="Human resources"> <entry uri="sip:test1@test.intra"> <display-name>bartaj</display-name> </entry> <entry uri="sip:test2@test.intra"> <display-name>12345</display-name> </entry> </list> <packages> <package>presence</package> </packages> </service> <service uri="sip:hr2@test.intra"> <list name="Human resources"> <entry uri="sip:test1@test.intra"> <display-name>bartaj</display-name> </entry> <entry uri="sip:test2@test.intra"> <display-name>12345</display-name> </entry> </list> <packages> <package>presence</package> </packages> </service> </rls-services> I think in that case I should see the next tree: -PC -105 -12345 -barta -Human resources -bartaj -12345 As You asked, I made a capture between the SER and XCAP. It was a little difficult, because I didn't see interesting traffic between the SER and XCAP, but a few minutes later I realised, that the SER for the communication (in that case) uses the loopback (lo) interface. You can see here the capture, that I made on the lo interface: 1 0.000000 127.0.0.1 -> 127.0.0.1 TCP 37512 > www [SYN] Seq=0 Len=0 MSS=16396 TSV=3808162073 TSER=0 WS=0 2 0.000056 127.0.0.1 -> 127.0.0.1 TCP www > 37512 [SYN, ACK] Seq=0 Ack=1 Win=32767 Len=0 MSS=16396 TSV=3808162073 TSER=3808162073 WS=0 3 0.000065 127.0.0.1 -> 127.0.0.1 TCP 37512 > www [ACK] Seq=1 Ack=1 Win=32767 Len=0 TSV=3808162073 TSER=3808162073 4 0.000072 127.0.0.1 -> 127.0.0.1 HTTP GET /xcap/pres-rules/users/12345/presence-rules.xml HTTP/1.1 5 0.000079 127.0.0.1 -> 127.0.0.1 TCP www > 37512 [ACK] Seq=1 Ack=113 Win=32767 Len=0 TSV=3808162073 TSER=3808162073 6 0.000545 127.0.0.1 -> 127.0.0.1 HTTP HTTP/1.1 200 OK 7 0.000559 127.0.0.1 -> 127.0.0.1 TCP 37512 > www [ACK] Seq=113 Ack=262 Win=32767 Len=0 TSV=3808162074 TSER=3808162074 8 0.000571 127.0.0.1 -> 127.0.0.1 HTTP Continuation or non-HTTP traffic 9 0.000578 127.0.0.1 -> 127.0.0.1 TCP 37512 > www [ACK] Seq=113 Ack=870 Win=32767 Len=0 TSV=3808162074 TSER=3808162074 10 0.005535 127.0.0.1 -> 127.0.0.1 TCP 37513 > www [SYN] Seq=0 Len=0 MSS=16396 TSV=3808162079 TSER=0 WS=0 11 0.005556 127.0.0.1 -> 127.0.0.1 TCP www > 37513 [SYN, ACK] Seq=0 Ack=1 Win=32767 Len=0 MSS=16396 TSV=3808162079 TSER=3808162079 WS=0 12 0.005565 127.0.0.1 -> 127.0.0.1 TCP 37513 > www [ACK] Seq=1 Ack=1 Win=32767 Len=0 TSV=3808162079 TSER=3808162079 13 0.005616 127.0.0.1 -> 127.0.0.1 HTTP GET /xcap/pres-rules/users/bartaj/presence-rules.xml HTTP/1.1 14 0.005623 127.0.0.1 -> 127.0.0.1 TCP www > 37513 [ACK] Seq=1 Ack=114 Win=32767 Len=0 TSV=3808162079 TSER=3808162079 15 0.005989 127.0.0.1 -> 127.0.0.1 HTTP HTTP/1.1 200 OK 16 0.006000 127.0.0.1 -> 127.0.0.1 TCP 37513 > www [ACK] Seq=114 Ack=262 Win=32767 Len=0 TSV=3808162079 TSER=3808162079 17 0.006011 127.0.0.1 -> 127.0.0.1 HTTP Continuation or non-HTTP traffic 18 0.006017 127.0.0.1 -> 127.0.0.1 TCP 37513 > www [ACK] Seq=114 Ack=870 Win=32767 Len=0 TSV=3808162079 TSER=3808162079 19 2.979491 127.0.0.1 -> 127.0.0.1 HTTP GET /xcap/rls-services/global/index HTTP/1.1 20 2.979722 127.0.0.1 -> 127.0.0.1 HTTP HTTP/1.1 200 OK 21 2.979734 127.0.0.1 -> 127.0.0.1 TCP 37512 > www [ACK] Seq=209 Ack=1126 Win=32767 Len=0 TSV=3808165053 TSER=3808165053 22 2.979745 127.0.0.1 -> 127.0.0.1 HTTP Continuation or non-HTTP traffic 23 2.979751 127.0.0.1 -> 127.0.0.1 TCP 37512 > www [ACK] Seq=209 Ack=1887 Win=32767 Len=0 TSV=3808165053 TSER=3808165053 You can see, that in the message number 19 the SER downloaded the index file. This file contains correct information: sip:~# wget 127.0.0.1/xcap/rls-services/global/index --17:22:43-- http://127.0.0.1/xcap/rls-services/global/index => `index' Connecting to 127.0.0.1:80... connected. HTTP request sent, awaiting response... 200 OK Length: 761 [text/plain] 100%[====================================>] 761 --.--K/s 17:22:43 (7.26 MB/s) - `index' saved [761/761] sip:~# sip:~# cat index <?xml version="1.0" encoding="UTF-8"?> <rls-services> <service uri="sip:bartaj-list@test.intra"> <list name="Human resources"> <entry uri="sip:test1@test.intra"> <display-name>bartaj</display-name> </entry> <entry uri="sip:test2@test.intra"> <display-name>12345</display-name> </entry> </list> <packages> <package>presence</package> </packages> </service> <service uri="sip:hr2@test.intra"> <list name="Human resources"> <entry uri="sip:test1@test.intra"> <display-name>bartaj</display-name> </entry> <entry uri="sip:test2@test.intra"> <display-name>12345</display-name> </entry> </list> <packages> <package>presence</package> </packages> </service> </rls-services> sip:~# And at last, how can I add query_rls_services and query_resource_list log informations into the config file? Thx, Jani Hi, this part of config file is not sufficient for me, but I guess that RLS related things stayed as in the original config you mentioned... In which way it doesn't work? (For example it returns non OK responses?) Please could you try to capture HTTP traffic between XCAP server and SER? (If SER really queries the right resource list document.) You can add more log information around important config parts (query_rls_services and query_resource_list functions are most important here). BTW the second message you sent is not subscription to resource list or user, it is subscription to event package 'sip-profile' (content of Event header field) which is not supported by SER. It is possible to use registration status as source for presence - in this case you have to have PA module on your server handling registrations and PA module parameter 'use_callbacks' must be set to 1. Vaclav -----Original Message----- From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Sent: Tuesday, April 03, 2007 11:18 AM To: Barta János Cc: serusers(a)iptel.org Subject: Re: [Serusers] global contact list _______________________________________________________________________________ Állást keres? 3300+ lehetőséget kínál a CV-Online Ne keressen tovább! Portálunkon Magyarország vezető vállalatainak több mint 3300 friss állásajánlatából válogathat! http://ad.adverticum.net/b/cl,1,6022,139845,209300/click.prm

sip:/opt/etc/ser# cat ./ser_pa.cfg log_stderror=yes debug=5 # debug level (cmd line: -dddddddddd) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=2 alias="test.intra" #alias="ipp.test.intra" alias="10.22.1.210" mhomed=yes # usefull for multihomed hosts, small performance penalty #tcp_accept_aliases=yes # accepts the tcp alias via option (see NEWS) #tcp_poll_method="sigio_rt" # ------------------ module loading ---------------------------------- loadmodule "/opt/lib/ser/modules/sl.so" loadmodule "/opt/lib/ser/modules/avp.so" loadmodule "/opt/lib/ser/modules/avpops.so" loadmodule "/opt/lib/ser/modules/tm.so" loadmodule "/opt/lib/ser/modules/rr.so" loadmodule "/opt/lib/ser/modules/maxfwd.so" loadmodule "/opt/lib/ser/modules/usrloc.so" loadmodule "/opt/lib/ser/modules/registrar.so" loadmodule "/opt/lib/ser/modules/textops.so" loadmodule "/opt/lib/ser/modules/mysql.so" loadmodule "/opt/lib/ser/modules/dialog.so" loadmodule "/opt/lib/ser/modules/rls.so" loadmodule "/opt/lib/ser/modules/pa.so" loadmodule "/opt/lib/ser/modules/presence_b2b.so" loadmodule "/opt/lib/ser/modules/uri.so" loadmodule "/opt/lib/ser/modules/uri_db.so" loadmodule "/opt/lib/ser/modules/domain.so" loadmodule "/opt/lib/ser/modules/fifo.so" loadmodule "/opt/lib/ser/modules/xmlrpc.so" loadmodule "/opt/lib/ser/modules/xlog.so" #loadmodule "/opt/lib/ser/modules/unixsock.so" loadmodule "/opt/lib/ser/modules/msilo.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/opt/lib/ser/modules/auth.so" #loadmodule "/opt/lib/ser/modules/auth_db.so" loadmodule "/opt/lib/ser/modules/acc_radius.so" loadmodule "/opt/lib/ser/modules/mediaproxy.so" loadmodule "/opt/lib/ser/modules/auth_radius.so" # ----------------- setting module-specific parameters --------------- ############################# modparam("mediaproxy", "mediaproxy_socket", "/var/run/mediaproxy.sock") modparam("auth_radius","radius_config","/etc/radiusclient-ng/radiusclient.conf") ######################### # -- acc params -- # ######################### modparam("acc_radius","radius_config","/etc/radiusclient-ng/radiusclient.conf") modparam("acc_radius", "log_flag", 1) modparam("acc_radius", "log_missed_flag", 2) modparam("msilo","registrar","sip:registrar@test.intra") modparam("msilo","use_contact",0) modparam("msilo","expire_time",7200) # -- usrloc params -- # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("rls", "min_expiration", 200) modparam("rls", "max_expiration", 300) modparam("rls", "default_expiration", 300) modparam("rls", "auth", "none") modparam("rls", "xcap_root", "http://localhost/xcap") modparam("rls", "reduce_xcap_needs", 1) modparam("rls", "db_mode", 1) modparam("rls", "db_url", "mysql://xxxxxxxxxxx:yyyyyyyyy@10.22.1.222/ser_pa") modparam("pa", "use_db", 1) # allow storing authorization requests for offline users into database modparam("pa", "use_offline_winfo", 1) # how often try to remove old stored authorization requests modparam("pa", "offline_winfo_timer", 600) # how long stored authorization requests live modparam("pa", "offline_winfo_expiration", 600) modparam("pa", "db_url", "mysql://xxxxxxxxxxx:yyyyyyyyy@10.22.1.222/ser_pa") # mode of PA authorization: none, implicit or xcap modparam("pa", "auth", "xcap") modparam("pa", "auth_xcap_root", "http://localhost/xcap") # do not authorize watcherinfo subscriptions modparam("pa", "winfo_auth", "none") # use only published information if set to 0 modparam("pa", "use_callbacks", 1) # don't accept internal subscriptions from RLS, ... modparam("pa", "accept_internal_subscriptions", 1) # maximum value of Expires for subscriptions modparam("pa", "max_subscription_expiration", 600) # maximum value of Expires for publications modparam("pa", "max_publish_expiration", 120) # how often test if something changes and send NOTIFY modparam("pa", "timer_interval", 10) # route for generated SUBSCRIBE requests for presence modparam("presence_b2b", "presence_route", "<sip:127.0.0.1;transport=tcp;lr>") # waiting time from error to new attepmt about SUBSCRIBE modparam("presence_b2b", "on_error_retry_time", 60) # how long wait for NOTIFY with Subscription-Status=terminated after unsubscribe modparam("presence_b2b", "wait_for_term_notify", 33) # how long before expiration send renewal SUBSCRIBE request modparam("presence_b2b", "resubscribe_delta", 30) # minimal time to send renewal SUBSCRIBE request from receiving previous response modparam("presence_b2b", "min_resubscribe_time", 60) # default expiration timeout modparam("presence_b2b", "default_expiration", 3600) # process internal subscriptions to presence events modparam("presence_b2b", "handle_presence_subscriptions", 1) modparam("usrloc", "db_mode", 2) modparam("domain", "db_mode", 1) #modparam("domain|uri_db|acc|auth_db|usrloc|msilo", "db_url", "mysql://xxxxxxxxxxx:yyyyyyyyy@10.22.1.222/ser_pa") modparam("domain|uri_db|auth_db|usrloc|msilo", "db_url", "mysql://xxxxxxxxxxx:yyyyyyyyy@10.22.1.222/ser_pa") modparam("fifo", "fifo_file", "/tmp/ser_fifo") # ------------------------- request routing logic ------------------- # main routing logic route{ # XML RPC if (method == "POST" || method == "GET") { create_via(); dispatch_rpc(); break; } # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); if ((method=="INVITE") or (method=="BYE") or (method=="CANCEL")) { setflag(1); } # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (!lookup_domain("To")) { xlog("L_ERR", "Unknown domain to: %tu from: %fu\n"); route(1); break; } if (method=="SUBSCRIBE") { if (!t_newtran()) { sl_reply_error(); break; }; if (@to.tag=="") { # only for new subscriptions (with empty to tag) if (lookup_user("To")) { # existing user -> it is subscription to PA if (handle_subscription("registrar")) { if ((@msg.event=~"presence\.winfo")) { # new watcher info subscription # sends one watcher info NOTIFY message with all saved authorization requests xlog("L_ERR", "dumping stored winfo to %fu\n"); dump_stored_winfo("registrar", "presence"); } else { # new presence subscription if ((@msg.event=~"presence") && (%subscription_status=="pending")) { # if offline user and new pending subscription if (!target_online("registrar")) { #%subscription_status="waiting"; # store it as waiting subscription xlog("L_ERR", "storing 'pending' winfo to: %tu, from: %fu\n"); store_winfo("registrar"); } } } } break; } if ((@msg.supported=~"eventlist")) { # such user doesn't exist and Supported header field # -> probably RLS subscription if (lookup_domain("From")) { if (lookup_user("From")) { if (is_simple_rls_target("$uid-list")) { # log(1, "it is simple subscription!\n"); # takes From UID and makes XCAP query for user's # list named "default" if (!query_resource_list("default")) { t_reply("404", "No such user list"); break; } } } } if (!have_flat_list()) { # query_resource_list failed or was not called # do standard RLS query acording to To/AOR if (!query_rls_services()) { log(1, "XCAP query failed\n"); t_reply("404", "No such list URI"); break; } } if (!radius_www_authorize("test.intra")) { www_challenge("test.intra", "0"); break; }; handle_rls_subscription("1"); } else { # not resource list subscription -> invalid user xlog("L_ERR", "subscription to invalid user %tu\n"); t_reply("404", "User not found"); } break; } else { # renewal subscriptions - try to handle it as RLS and if failed, handle it as PA subscription # FIXME: better will be test like existing_rls_subscription() # and existing_subscription("registrar") if (!handle_rls_subscription("0")) { handle_subscription("registrar"); } break; } }; # get user (common for all other messages than SUBSCRIBE) if (!lookup_user("To")) { # log(1, "Unknown user - message should be forwarded?"); # # break; append_hf("P-hint: unknown user\r\n"); route(1); break; } if (method=="PUBLISH") { if (!t_newtran()) { # log(1, "newtran error\n"); sl_reply_error(); break; }; handle_publish("registrar"); # deliver messages to online user # TODO: only if user goes from offline to online? if (target_online("registrar")) { # log(1, "Dumping stored messages\n"); # dump stored messages - route it through myself (otherwise routed via DNS!) if (m_dump("sip:127.0.0.1")) { xlog("L_ERR", "MSILO: offline messages for %fu dumped\n"); } } break; }; if (method=="NOTIFY") { if (!t_newtran()) { log(1, "newtran error\n"); sl_reply_error(); break; }; # handle notification sent in internal subscriptions (presence_b2b) if (!handle_notify()) { t_reply("481", "Unable to handle notification"); } break; }; if (method=="MESSAGE") { if (authorize_message("http://localhost/xcap")) { # use usrloc for delivery if (lookup("location")) { log(1, "Delivering MESSAGE using usrloc\n"); t_on_failure("1"); if (!t_relay()) { sl_reply_error(); } break; } else { # store messages for offline user xlog("L_ERR", "MSILO: storing MESSAGE for %tu\n"); if (!t_newtran()) { log(1, "newtran error\n"); sl_reply_error(); break; }; # store only text messages NOT isComposing... ! if (search("^(Content-Type|c):.*application/im-iscomposing\ xml.*")) { log(1, "it is only isComposing message - ignored\n"); t_reply("202", "Ignored"); break; } if (m_store("0", "sip:127.0.0.1")) { # log(1, "MSILO: offline message stored\n"); if (!t_reply("202", "Accepted")) { sl_reply_error(); }; } else { log(1, "MSILO: error storing offline message\n"); if (!t_reply("503", "Service Unavailable")) { sl_reply_error(); }; }; break; } break; } else { # log(1, "unauthorized message\n"); sl_reply("403", "Forbidden"); } break; } if (method=="REGISTER") { if (!radius_www_authorize("test.intra")) { www_challenge("test.intra", "0"); break; }; save("location"); # dump stored messages - route it through myself (otherwise routed via DNS!) if (m_dump("sip:127.0.0.1")) { xlog("L_ERR", "MSILO: offline messages for %fu dumped\n"); } break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # append_hf("P-hint: usrloc applied\r\n"); route(1); } #route[1] #{ # # send it out now; use stateful forwarding as it works reliably # # even for UDP2TCP # if (!t_relay()) { # sl_reply_error(); # }; #} #failure_route[1] { # # forwarding failed -- check if the request was a MESSAGE # if (!method=="MESSAGE") { break; }; # log(1, "MSILO: MESSAGE forward failed - storing it\n"); # # # we have changed the R-URI with the contact address, ignore it now # if (m_store("0", "")) { # t_reply("202", "Accepted"); # } else { # log(1, "MSILO: offline message NOT stored\n"); # t_reply("503", "Service Unavailable"); # }; #} route[1] { if (method=="INVITE") { t_on_reply("1"); t_on_failure("1"); use_media_proxy(); } else if (method=="BYE|CANCEL") { end_media_session(); } # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; } onreply_route[1] { if (status=~"(183)|2[0-9][0-9]") { use_media_proxy(); }; if (status=~"[3-6]0[0-9]") { end_media_session(); break; } } failure_route[1] { # forwarding failed -- check if the request was a MESSAGE if (!method=="MESSAGE") { break; }; log(1, "MSILO: MESSAGE forward failed - storing it\n"); # we have changed the R-URI with the contact address, ignore it now if (m_store("0", "")) { t_reply("202", "Accepted"); } else { log(1, "MSILO: offline message NOT stored\n"); t_reply("503", "Service Unavailable"); }; end_media_session(); }