9 Feb
2010
9 Feb
'10
3:27 a.m.
You have to debug this yourself.
Add log statements to the .cfg file, e.g. add
xlog("L_INFO","calling rtpproxy ...");
just before the call to force_rtpproxy().
then verify the logfile if rtpproxy is called.
Increase debugging (debug=4) and verify the log file for potential problems.
Configure rtpproxy/kamilio to use a UDP socket instead of the unix
socket. Then you can use ngrep/tcpdump to watch the communication
between kamailio and rtpproxy.
regards
klaus
Am 09.02.2010 01:25, schrieb Vikram Ragukumar:
Hello,
I am running Kamailio version 1.5 and rtpproxy version 1.2. I have
enabled NAT support in Kamailio.cfg. I have a UA behind NAT (UA
IP:192.168.2.101), and the UA registers with an Asterisk server (Public
IP) through an outbound proxy running Kamailio and rtpproxy with Public IP.
Registration succeeds, however when making an outbound call from the UA
to a cellphone, there is only one sided voice. This is happening because
Asterisk is addressing rtp streams to the UA's local IP address instead
of its PublicIP:port.
Why is the IP address not being rewritten in the SDP ? Is there an
alternate way of invoking rtpproxy (with flags) such that the IP address
in the SDP is rewritten ?
Thanks and Regards,
Vikram.
PS : Below is the main routing section of my kamailio.cfg
route{
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
}
# NAT detection
route(4);
if (has_totag()) {
# sequential request withing a dialog should
# take the path determined by record-routing
if (loose_route()) {
if (is_method("BYE")) {
setflag(1); # do accounting ...
setflag(3); # ... even if the transaction fails
}
route(1);
} else {
if (is_method("SUBSCRIBE") && uri == myself) {
# in-dialog subscribe requests
route(2);
exit;
}
if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# non loose-route, but stateful ACK; must be an ACK after a 487 or
e.g. 404 from upstream server
t_relay();
exit;
} else {
# ACK without matching transaction ... ignore and discard.\n");
exit;
}
}
sl_send_reply("404","Not here");
}
exit;
}
# CANCEL processing
if (is_method("CANCEL"))
{
if (t_check_trans())
t_relay();
exit;
}
t_check_trans();
# record routing
if (!is_method("REGISTER|MESSAGE"))
record_route();
# account only INVITEs
if (is_method("INVITE")) {
setflag(1); # do accounting
}
if (!uri==myself)
{
append_hf("P-hint: outbound\r\n");
route(1);
}
# requests for my domain
if( is_method("PUBLISH|SUBSCRIBE"))
route(2);
if (is_method("REGISTER"))
{
if (isflagset(5)) {
setbflag(6);
# setbflag(7);
}
if (!save("location"))
sl_reply_error();
exit;
}
if ($rU==NULL) {
# request with no Username in RURI
sl_send_reply("484","Address Incomplete");
exit;
}
# apply DB based aliases (uncomment to enable)
##alias_db_lookup("dbaliases");
if (!lookup("location")) {
switch ($retcode) {
case -1:
case -3:
t_newtran();
t_reply("404", "Not Found");
exit;
case -2:
sl_send_reply("405", "Method Not Allowed");
exit;
}
}
# when routing via usrloc, log the missed calls also
setflag(2);
route(1);
}
route[1] {
if (check_route_param("nat=yes")) {
setbflag(6);
}
if (isflagset(5) || isbflagset(6)) {
route(5);
}
/* example how to enable some additional event routes */
if (is_method("INVITE")) {
#t_on_branch("1");
t_on_reply("1");
t_on_failure("1");
}
if (!t_relay()) {
sl_reply_error();
}
exit;
}
# Presence route
/* uncomment the whole following route for enabling presence server */
route[2]
{
# if presence enabled, this part will not be executed
if (is_method("PUBLISH") || $rU==null)
{
sl_send_reply("404", "Not here");
exit;
}
return;
}
# Caller NAT detection route
/* uncomment the whole following route for enabling Caller NAT Detection */
route[4]{
force_rport();
if (nat_uac_test("19")) {
if (method=="REGISTER") {
fix_nated_register();
} else {
fix_nated_contact();
setflag(6);#VR
}
setflag(5);
}
return;
}
# RTPProxy control
/* uncomment the whole following route for enabling RTPProxy Control */
route[5] {
if (is_method("BYE")) {
unforce_rtp_proxy();
} else if (is_method("INVITE")){
force_rtp_proxy();
}
if (!has_totag()) add_rr_param(";nat=yes");
return;
}
branch_route[1] {
xdbg("new branch at $ru\n");
}
onreply_route[1] {
xdbg("incoming reply\n");
if ((isflagset(5) || isbflagset(6)) && status=~"(183)|(2[0-9][0-9])")
{
force_rtp_proxy();
}
if (isbflagset(6)) {
fix_nated_contact();
}
}
failure_route[1] {
if (is_method("INVITE")
&& (isbflagset(6) || isflagset(5))) {
unforce_rtp_proxy();
}
if (t_was_cancelled()) {
exit;
}
}
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users