30 Nov
2016
30 Nov
'16
12:24 p.m.
Hi Sergey,
Thank you for the tip. I'm going to try topoh but not now.
The question is: is there a bug in freeswitch or bug in my kamailio's
config. And it seems to me that there is a bug in freeswitch. I see in Via
my SIP proxy without transport=tls. And as per RFC freeswitch must use
transport which is specified in Via for the next hop.
Maybe I'm wrong. But I do not think so :)
2016-11-30 18:20 GMT+02:00 Sergey Basov <sergey.v.basov(a)gmail.com>om>:
Hi, Vladislav
I had very simmilar issue, try to use topoh module.
It will mask contact in header and called side will not try to send reply
to contact dyrectly or using its proto.
It will send using via or record-route headers.
But this will work when kamailio is in statefull proxy mode.
29 нояб. 2016 г. 12:37 AM пользователь "Vladyslav Zakhozhai" <
v.zakhozhai(a)gmail.com> написал:
Ouch... It didn't work for me as expected. I forgot that I have configured
--
С уважением,
Владислав Захожай
FreeSWITCH to work with TLS.
When I reverted sofia profile to work only over UDP originating call
fails again with message:
[ERR] sofia_glue.c:943 TLS not supported by profile
2016-11-29 0:21 GMT+02:00 Vladyslav Zakhozhai <v.zakhozhai(a)gmail.com>om>:
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Daniel, Alex, thank you for your answers.
FreeSWITCH works with path as expected and it is my solution. add_path
and add_path_received works fine in kamailio's config.
2016-11-28 19:02 GMT+02:00 Vladyslav Zakhozhai <v.zakhozhai(a)gmail.com>om>:
--
С уважением,
Владислав Захожай
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
That is very interesting.
I've added add_path_received in Kamailio config. And I can see that
FreeSWITCH received it and reflected in registration info.
With SIP/UDP there is no problems. FreeSWITCH gets path and respnses
and INVITEs goes through Kamailio.
But in case of TLS INVITES goes to Kamailio but FreeSWITCH tries to
originate call with TLS.
Mybe this is FreeSWITCH issue. I'll check later.
2016-11-28 14:42 GMT+02:00 Daniel Tryba <d.tryba(a)pocos.nl>nl>:
> On Mon, Nov 28, 2016 at 01:15:03PM +0100, Daniel Tryba wrote:
> > > UAC == SIP/TLS ==> Kamailio == SIP/UDP ==> FreeSWITCH
> > >
> > solution is to use Path on the frontend/loadbalancer.
>
> According to this closed bug report it should work for
> Kamailio/Freeswitch:
> https://freeswitch.org/jira/si/jira.issueviews:issue-html/FS
> -4989/FS-4989.html
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users(a)lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
--
С уважением,
Владислав Захожай
--
С уважением,
Владислав Захожай