HI Alexandru i talk about something like this
maybe in your RELAY route
or similar.
I think you would have issues with ACKs until you would have
Record-Route: doubled
if (dst_ip==LOCALIPNETWORK/24) {
xlog("Using socket: LOCALIP:5060");
force_send_socket(udp:LOCALIP:5060);
} else {
xlog("Using socket: PUBLICIP:5060");
force_send_socket(udp:PUBLICIP:5060);
}
Hope this helps you
Use record_route() as well.
Anyway show me a trace that goes to FreeSwitch from Kamailio.
2016-02-25 10:55 GMT+01:00 Alexandru Covalschi <568691(a)gmail.com>om>:
No other rr params defined so double rr is
default - enabled.
What do you mean by "force traffic" - how to do that? Every other
request (excep BYE - same problem with it) flows OK.
2016-02-25 11:49 GMT+02:00 Alexandru Covalschi <568691(a)gmail.com>om>:
> Hi, thanks for answer
>
> Here's configuration:
>
> listen=udp:MY_EXT_IP_ADDR:5060
> listen=tcp:MY_EXT_IP_ADDR:5060
> listen=udp:MY_INT_IP_ADDR:5060
> listen=TCP:MY_INT_IP_ADDR:5060
> listen=MY_WS_ADDR
> advertised_address = MY_EXT_IP_ADDR
> alias = MY_INT_IP_ADDR
> alias = MY_DOMAIN
>
> #!ifdef WITH_TLS
> listen=MY_WSS_ADDR
> #!endif
>
> port=5060
>
> ...
>
> # ----- rr params -----
> modparam("rr", "enable_full_lr", 1)
> modparam("rr", "append_fromtag", 1)
>
>
> 2016-02-25 8:47 GMT+02:00 Alberto Sagredo <
> alberto.sagredo(a)avanzada7.com>gt;:
>
>> Hi Alexandru
>>
>> How is your configuration about Public IP and Private IP?
>>
>> Do you use advertise?
>>
>> Maybe you need to force Outbound traffic to Public IP Socket and
>> inside traffic to Private IP .
>>
>> Do you have double record routing?
>>
>> BR
>>
>> 2016-02-25 1:24 GMT+01:00 Alexandru Covalschi <568691(a)gmail.com>om>:
>>
>>> Hello everyone.
>>>
>>> The setup is:
>>> Carrier ip is CARRIER_IP
>>> Public network Kamailio IP will be PUBLIC_IP
>>> Private network Kamailio IP will be KAMAILIO_PRIVATE_IP
>>> Private network Freeswitch IP is FREESWITCH_PRIVATE_IP
>>>
>>> ACK
>>> CARRIER_IP -> PUBLIC_IP->FREESWITCH_PRIVATE_IP
>>>
>>> And freeswitch tries to actually send ACK back to PUBLIC_IP which he
>>> can't access.
>>>
>>> Kamailio trace:
http://pastebin.com/raw/1W1sXuUa
>>> Freeswitch trace:
http://pastebin.com/raw/KkZCwTTJ
>>>
>>> request_route:
http://pastebin.com/raw/Y17pXUGY
>>> NATMANAGE route:
http://pastebin.com/raw/0BpPDjN0
>>> WITHINDLG route:
http://pastebin.com/raw/5LpwSigF
>>>
>>> I'm seeking help with that - what parameter I need to change/add to
>>> solve that?
>>> Maybe it's a networking problem - but why then ACK reaches
>>> Freeswitch and all other requests flow OK?
>>>
>>> Thanks in advance, Alex
>>>
>>> --
>>> Alexandru Covalschi
>>> ABRISS-Solutions
>>> VoIP engineer and system administrator
>>> phone: +37367398493
>>> web:
http://abs-telecom.com/
>>>
>>> _______________________________________________
>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
>>> list
>>> sr-users(a)lists.sip-router.org
>>>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>
>>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
>> list
>> sr-users(a)lists.sip-router.org
>>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>
>
> --
> Alexandru Covalschi
> ABRISS-Solutions
> VoIP engineer and system administrator
> phone: +37367398493
> web:
http://abs-telecom.com/
>
--
Alexandru Covalschi
ABRISS-Solutions
VoIP engineer and system administrator
phone: +37367398493
web:
http://abs-telecom.com/
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org