Hi, Klaus.
Yes, I configured the radius server IP in authserver and acctserver in radiusclient.conf file in the radiusclient-ng folder. I also added the server and secret in the servers file in the same folder.
Maybe I have a port problem, but I checked the radius ports in /etc/services and they're ok. Is there another place to check the ports?
Thanks for your help. Rosa.
From: Klaus Darilion klaus.mailinglists@pernau.at To: Rosa De Santis rosadesantis@hotmail.com CC: serusers@lists.iptel.org Subject: Re: [Serusers] Radius accounting Date: Wed, 23 Nov 2005 09:32:32 +0100
Have you configured your Radius servers correctly? (in radiusclient.cconf)
klaus
Rosa De Santis wrote:
Hi Jan.
I put the acc_rad_request("text") and the setflag(1) in the route section and now I receive a warn message in syslog: rc_send_server: no reply from RADIUS server unknown: 1646. I still don't have any package out of port 1813, but i find packages trying to go out port 1646.
Do you know why is this happening? Please help...
Rosa.
From: Jan Janak jan@iptel.org To: Rosa De Santis rosadesantis@hotmail.com CC: Subject: Re: [Serusers] Radius accounting Date: Sat, 19 Nov 2005 00:16:08 +0100
Only if a transaction has been created. REGISTERs, for example, do not create transactions.
Try to add acc_rad_request("text"); right after setflag(1). This should log any request.
Jan.
On 18-11-2005 22:27, Rosa De Santis wrote:
Hi again Jan.
The way I have the setflag command does not register all messages for accounting? I mean: register, invite, bye, etc ?
Thanks Rosa.
From: Jan Janak jan@iptel.org To: Rosa De Santis rosadesantis@hotmail.com CC: > >Subject: Re: [Serusers] Radius accounting Date: Fri, 18 Nov 2005 23:08:16 +0100
Yes, this is what I meant. Could you also post dumps of SIP traffic
that
should have been accounted ?
Jan.
On 18-11-2005 21:50, Rosa De Santis wrote: > Hello. Thanks for your help. > > This is my ser.cfg. > I set log_flag, log_level and radius_flag to 1, and I don't get
anything
in > syslog. > This is what you mean? > > Thanks again. > Rosa. > > ------------------------ > debug = 9 > fork=no > log_stderror=yes > > check_via=no # (cmd. line: -v) > dns=no # (cmd. line: -r) > rev_dns=no # (cmd. line: -R) > #port=5060 > #children=4 > fifo="/tmp/ser_fifo" > > loadmodule "/usr/local/lib/ser/modules/mysql.so" > loadmodule "/usr/local/lib/ser/modules/sl.so" > loadmodule "/usr/local/lib/ser/modules/tm.so" > loadmodule "/usr/local/lib/ser/modules/rr.so" > loadmodule "/usr/local/lib/ser/modules/maxfwd.so" > loadmodule "/usr/local/lib/ser/modules/usrloc.so" > loadmodule "/usr/local/lib/ser/modules/registrar.so" > loadmodule "/usr/local/lib/ser/modules/textops.so" > loadmodule "/usr/local/lib/ser/modules/acc.so" > loadmodule "/usr/local/lib/ser/modules/auth.so" > loadmodule "/usr/local/lib/ser/modules/auth_radius.so" > > modparam("usrloc", "db_mode", 2) > modparam("acc", "log_level", 1) > modparam("acc", "log_flag", 1) > modparam("acc", "radius_config", > "/usr/local/etc/radiusclient-ng/radiusclient.conf") > modparam("acc", "radius_missed_flag", 2) > modparam("acc", "radius_flag", 1) > modparam("acc", "service_type", 15) > modparam("auth_radius", "radius_config", > "/usr/local/etc/radiusclient-ng/radiusclient.conf") > > route{ > > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > break; > }; > if (msg:len >= 2048 ) { > sl_send_reply("513", "Message too big"); > break; > }; > > setflag(1); > if (!method=="REGISTER") record_route(); > > if (loose_route()) { > # mark routing logic in request > append_hf("P-hint: rr-enforced\r\n"); > route(1); > break; > }; > > if (!uri==myself) { > # mark routing logic in request > append_hf("P-hint: outbound\r\n"); > route(1); > break; > }; > > if (uri==myself) { > > if (method=="REGISTER") { > > if (!radius_www_authorize("")) { > www_challenge("", "0"); > break; > }; > save("location"); > break; > }; > > lookup("aliases"); > if (!uri==myself) { > append_hf("P-hint: outbound alias\r\n"); > route(1); > break; > }; > > # native SIP destinations are handled using our USRLOC DB > if (!lookup("location")) { > sl_send_reply("404", "Not Found"); > break; > }; > }; > > append_hf("P-hint: usrloc applied\r\n"); > route(1); > } > > route[1] > { > if (!t_relay()) { > sl_reply_error(); > }; > } > > ------------------------ > > > >From: Jan Janak jan@iptel.org > >To: Rosa De Santis rosadesantis@hotmail.com > >CC: serusers@lists.iptel.org > >Subject: Re: [Serusers] Radius accounting > >Date: Fri, 18 Nov 2005 21:16:22 +0100 > > > >Did you mark the transaction with correct flag ? Try to configure
both
> >syslog and radius accounting with the same flag and see if you
get any
> >accounting records in syslog. > > > > Jan. > > > >On 18-11-2005 20:04, Rosa De Santis wrote: > >> Yes, I set the server IP in authserver and acctserver in the > >> radiusclient.conf file in the radiusclient-ng folder. > >> I also added the server and secret in the servers file in the
same
> >folder. > >> The strange thing is that i'm making authorization to the same
Radius
> >> server, why accounting is not working? > >> > >> Thanks > >> Rosa. > >> > >> > >> >From: Jan Janak jan@iptel.org > >> >To: Rosa De Santis rosadesantis@hotmail.com > >> >CC: serusers@lists.iptel.org > >> >Subject: Re: [Serusers] Radius accounting > >> >Date: Fri, 18 Nov 2005 21:04:26 +0100 > >> > > >> >Did you configure the accounting server in the configuration
file of
> >> >radiusclient-ng ? > >> > > >> >Do you have correct secret for the server ? > >> > > >> > Jan. > >> > > >> >On 18-11-2005 18:25, Rosa De Santis wrote: > >> >> Hello all. > >> >> > >> >> Please, I am trying to make Radius authorization and
accounting
using > >> >SER > >> >> 0.9.3 and radiusclient-ng. I already set all the
configuration as
the > >> >> ser_radius HowTo. > >> >> Now, I'm making Radius authorization successfully, but not > >accounting, I > >> >> don't get anything going out through port 1813. > >> >> > >> >> The Radius Server is in another machine, i'm configuring
only the
> >radius > >> >> client. > >> >> Is there other things to do besides the ser_radius howto?
Please
> >help... > >> >> > >> >> Thanks a lot > >> >> Rosa. > >> >> > >> >> > >> >> _______________________________________________ > >> >> Serusers mailing list > >> >> serusers@lists.iptel.org > >> >> http://lists.iptel.org/mailman/listinfo/serusers > >> > >> > >> _______________________________________________ > >> Serusers mailing list > >> serusers@lists.iptel.org > >> http://lists.iptel.org/mailman/listinfo/serusers > > > _______________________________________________ > Serusers mailing list > serusers@lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers