22 Nov
2005
22 Nov
'05
12:49 p.m.
There is a dictionary file included with openser. It should be in the
same directory as openser.cfg. Use this one.
When I use radius I do:
1. copy the default radiusclient.conf file (e.g.
/etc/radiusclient-ng/radiusclient.conf) into the openser config directory:
cp /etc/radiusclient-ng/radiusclient.conf /etc/openser/
2. copy the default server file to openser config directory
cp /etc/radiusclient-ng/servers /etc/openser/radius-servers
3. add you radius server and the secret to /etc/openser/radius-servers
4. edit /etc/openser/radiusclient.conf to:
- use the dictionary /etc/openser/dictionary
- use the servers in /etc/openser/radius-servers
5. configure /etc/openser/openser.cfg to use proper radiusclient.conf file:
# -- radius configuration --
modparam("auth_radius", "radius_config",
"/etc/openser/radiusclient.conf")
It is a good practice to do not use the configuration files in the
radiusclient_ng directory. Thus way you can have several servers using
the radiusclient-ng with different settings.
regards
klaus
Lokesh Kumar wrote:
Hello Klaus,
Thanks for your reply
I am using radiusclient-ng 0.5.2 from berlios.But there is no line in
"/usr/local/radiusclient-ng-0.5.2/etc/dictionay" file containing SIP-AVP,
please tell me where should i move furthur.I am following "SER and Radius
How to" document by iptel.org. But I hope that is not applicable to openser.
Regards
Lokesh
----- Original Message -----
From: "Klaus Darilion" <klaus.mailinglists(a)pernau.at>
To: "Lokesh Kumar" <lokesh(a)interacesso.pt>
Cc: <users(a)openser.org>
Sent: Monday, November 21, 2005 8:34 PM
Subject: Re: [Serdev] Please help problem with AUTH with radius....using
openser-1.0.9
Hi Lokesh!
A small debugging workshop:
1. Watch the lines with "error" in it:
==> 0(0) ERROR: auth_radius: can't get code for the SIP-AVP attribute
2. Seems like the SIP-AVP attribute is unknown to the radius client. Are
you using the proper radius dictionary? There must be line with
"SIP-AVP" in it.
regards
klaus
Lokesh Kumar wrote:
Hello Friends,
I had installed openser-1.0.9, and enabled radius accounting in my
openser.cfg file. But I am getting errors mentioned below. and my
openser crashed without running. I am unable to find out whats the
reason. No posts available relating to this matter also. Please help
me.........
0(6348) shm_mem_init: success
0(0) core dump limits set to 4294967295
0(0) DEBUG: init_mod: sl_module
stateless - initializing
0(0) DEBUG: register_fifo_cmd: new command (sl_stats) registered
0(0) unixsock_register_cmd: New command (sl_stats) registered
0(0) DEBUG: MD5 calculated: 329cfeaa6ded039da25ff8cbb8668bd2
0(0) DEBUG: init_mod: tm
0(0) TM - (size of cell=2832, sip_msg=768) initializing...
0(0) Call-ID initialization: '3f69f754'
0(0) DEBUG: register_fifo_cmd: new command (t_uac_dlg) registered
0(0) DEBUG: register_fifo_cmd: new command (t_uac_cancel) registered
0(0) DEBUG: register_fifo_cmd: new command (t_hash) registered
0(0) DEBUG: register_fifo_cmd: new command (t_reply) registered
0(0) unixsock_register_cmd: New command (t_uac_dlg) registered
0(0) unixsock_register_cmd: New command (t_uac_cancel) registered
0(0) unixsock_register_cmd: New command (t_hash) registered
0(0) unixsock_register_cmd: New command (t_reply) registered
0(0) DEBUG: lock_initialize: lock initialization started
0(0) DEBUG: register_fifo_cmd: new command (t_stats) registered
0(0) unixsock_register_cmd: New command (t_stats) registered
0(0) DEBUG: MD5 calculated: 533cb9e91f4b999cf76861cbb9ed54ed
0(0) DEBUG: MD5 calculated: fa997f81440371de71ab448ebdb9af56
0(0) DEBUG: init_mod: rr
0(0) rr - initializing
0(0) DEBUG: init_mod: maxfwd
0(0) Maxfwd module- initializing
0(0) DEBUG: init_mod: usrloc
0(0) usrloc - initializing
0(0) DEBUG: register_fifo_cmd: new command (ul_stats) registered
0(0) DEBUG: register_fifo_cmd: new command (ul_rm) registered
0(0) DEBUG: register_fifo_cmd: new command (ul_rm_contact) registered
0(0) DEBUG: register_fifo_cmd: new command (ul_dump) registered
0(0) DEBUG: register_fifo_cmd: new command (ul_flush) registered
0(0) DEBUG: register_fifo_cmd: new command (ul_add) registered
0(0) DEBUG: register_fifo_cmd: new command (ul_show_contact) registered
0(0) unixsock_register_cmd: New command (ul_stats) registered
0(0) unixsock_register_cmd: New command (ul_rm) registered
0(0) unixsock_register_cmd: New command (ul_rm_contact) registered
0(0) unixsock_register_cmd: New command (ul_dump) registered
0(0) unixsock_register_cmd: New command (ul_flush) registered
0(0) unixsock_register_cmd: New command (ul_add) registered
0(0) unixsock_register_cmd: New command (ul_show_contact) registered
0(0) DEBUG: init_mod: registrar
0(0) registrar - initializing
0(0) find_export: found <sl_send_reply> in module sl_module
[/usr/local/lib/openser/modules/sl.so]
0(0) find_export: found <ul_bind_usrloc> in module usrloc
[/usr/local/lib/openser/modules/usrloc.so]
0(0) find_export: found <ul_register_udomain> in module usrloc
[/usr/local/lib/openser/modules/usrloc.so]
0(0) find_export: found <ul_get_all_ucontacts> in module usrloc
[/usr/local/lib/openser/modules/usrloc.so]
0(0) find_export: found <ul_insert_urecord> in module usrloc
[/usr/local/lib/openser/modules/usrloc.so]
0(0) find_export: found <ul_delete_urecord> in module usrloc
[/usr/local/lib/openser/modules/usrloc.so]
0(0) find_export: found <ul_get_urecord> in module usrloc
[/usr/local/lib/openser/modules/usrloc.so]
0(0) find_export: found <ul_lock_udomain> in module usrloc
[/usr/local/lib/openser/modules/usrloc.so]
0(0) find_export: found <ul_unlock_udomain> in module usrloc
[/usr/local/lib/openser/modules/usrloc.so]
0(0) find_export: found <ul_release_urecord> in module usrloc
[/usr/local/lib/openser/modules/usrloc.so]
0(0) find_export: found <ul_insert_ucontact> in module usrloc
[/usr/local/lib/openser/modules/usrloc.so]
0(0) find_export: found <ul_delete_ucontact> in module usrloc
[/usr/local/lib/openser/modules/usrloc.so]
0(0) find_export: found <ul_get_ucontact> in module usrloc
[/usr/local/lib/openser/modules/usrloc.so]
0(0) find_export: found <ul_update_ucontact> in module usrloc
[/usr/local/lib/openser/modules/usrloc.so]
0(0) find_export: found <ul_register_watcher> in module usrloc
[/usr/local/lib/openser/modules/usrloc.so]
0(0) find_export: found <ul_unregister_watcher> in module usrloc
[/usr/local/lib/openser/modules/usrloc.so]
0(0) find_export: found <ul_register_ulcb> in module usrloc
[/usr/local/lib/openser/modules/usrloc.so]
0(0) DEBUG: init_mod: textops
textops - initializing
0(0) DEBUG: init_mod: auth
0(0) AUTH module - initializing
0(0) find_export: found <sl_send_reply> in module sl_module
[/usr/local/lib/openser/modules/sl.so]
0(0) DEBUG: init_mod: auth_radius
0(0) auth_radius - Initializing
0(0) auth_radius: No `Cisco' vendor in Radius dictionary
0(0) find_export: found <bind_auth> in module auth
[/usr/local/lib/openser/modules/auth.so]
0(0) ERROR: auth_radius: can't get code for the SIP-AVP attribute
0(0) init_mod(): Error while initializing module auth_radius
ERROR: error while initializing modules
0(0) DEBUG: tm_shutdown : start
0(0) DEBUG: unlink_timer_lists : emptying DELETE list
0(0) DEBUG: tm_shutdown : emptying hash table
0(0) DEBUG: tm_shutdown : releasing timers
0(0) DEBUG: tm_shutdown : removing semaphores
0(0) DEBUG: tm_shutdown : destroying tmcb lists
0(0) DEBUG: tm_shutdown : done
0(6348) shm_mem_destroy
0(6348) destroying the shared memory lock
[root@ser init.d]#
Thanks you very much
Lokesh
------------------------------------------------------------------------
_______________________________________________
Serdev mailing list
Serdev(a)iptel.org
http://mail.iptel.org/mailman/listinfo/serdev