Hi Klaus,
On Fri, Aug 04, 2006 at 08:24:10AM +0200, Klaus Darilion wrote:
On Fri, August 4, 2006 8:10, raviprakash sunkara said:
Hi Klaus,
For me the same problem , But problem in Bye message , openser system didn't recieve the Bye request from the UAC's.....
This is not the same problem
You have a NAT problem
The client will send the BYE to the iP address in the Record-Route
header (if you use record_route()). Thus, make sure to announce the public IP address and setup a port forwarding from this public IP to the SIP proxy.
I have mostly the same problem. When the softphone behind my NATing proxy hangs up, the BYE message goes through the proxy. However, when the outside phone hangs up, my proxy never sees the BYE message, as though it was never issued.
My configuration file calls record_route() only for the INVITE action. Is it sufficient in regard to the fact the BYE will be send to the IP address in the Record-Route header ?
My configuration file contains: % if (method == "INVITE") { % record_route(); % force_rtp_proxy("r"); % t_on_reply("1"); % }
Thank you. Regards,