Re: [Serusers] Can't run SER with radius

well:

gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -Wall -minline-all-stringops -malign-double -falign-loops -mcpu=athlon -DNAME='"auth_radius.so"' -DVERSION='"0.8.14"' -DARCH='"i386"' -DOS='"linux"' -DCOMPILER='"gcc 3.3"' -D__CPU_i386 -D__OS_linux -DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_TCP -DDISABLE_NAGLE -DF_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -I/usr/local/include -c authrad_mod.c -o authrad_mod.o authrad_mod.c: In function `mod_init': authrad_mod.c:111: error: `DICT_VENDOR' undeclared (first use in this function) authrad_mod.c:111: error: (Each undeclared identifier is reported only once authrad_mod.c:111: error: for each function it appears in.) authrad_mod.c:111: error: `vend' undeclared (first use in this function) authrad_mod.c:135: warning: assignment makes pointer from integer without a cast authrad_mod.c:140: error: too many arguments to function `rc_conf_str' authrad_mod.c:140: error: too many arguments to function `rc_read_dictionary' authrad_mod.c:145: warning: implicit declaration of function `rc_dict_findvend' authrad_mod.c:163: error: too many arguments to function `rc_dict_findattr' authrad_mod.c:163: error: too many arguments to function `rc_dict_findval' make: *** [authrad_mod.o] Error 1

and... 0.8.14 binary package has auth_radius in it radiusd and radiusclient are installed and _working_

On Thursday 17 February 2005 17:32, Charles Wang wrote:

Just download the source code and type "make" under ser/modules/auth_radius/ Then copy the auth_radius.so to /usr/local/lib/ser/modules/ Re-run your serctl. Make sure you have to install radiusclient package first before compile it.

Charles

On Thu, 17 Feb 2005 16:44:16 +0200, Roman leroi@navigator.lv wrote:

...

Sorry forgot syslog messages:

Feb 17 16:37:41 uranus ser: ERROR: load_module: could not open module </usr/local/lib/ser/modules/auth_radius.so>: /usr/local/lib/ser/modules/auth_radius.so: undefined symbol: rc_dict_findvend Feb 17 16:37:41 uranus ser: parse error (36,13-55): failed to load module Feb 17 16:37:41 uranus ser: set_mod_param_regex: No module matching auth_radius found | Feb 17 16:37:41 uranus ser: parse error (44,78-79): Can't set module parameter Feb 17 16:37:41 uranus ser: set_mod_param_regex: No module matching auth_radius found | Feb 17 16:37:41 uranus ser: parse error (45,43-44): Can't set module parameter Feb 17 16:37:41 uranus ser: parse error (93,32-33): unknown command, missing loadmodule?

On Wednesday 16 February 2005 20:45, Roman wrote:

...

Anybody please help with subj 0.8.14 binaries from iptel.org ser -dddddddd says: ERROR: bad config file (4 errors)

config as in the manual:

# ----------- global configuration parameters ------------------------

debug=5 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)

/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5065 #children=4 fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so"

loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params -- modparam("usrloc", "db_mode", 2)

# -- auth params -- modparam("auth_radius", "radius_config","/etc/radiusclient/radiusclient.conf") modparam("auth_radius", "service_type", 15)

# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)

#modparam("acc", "log_level", 1) #modparam("acc", "radius_flag", 1)

# ------------------------- request routing logic ------------------- # main routing logic

route{

    # initial sanity checks -- messages with
    # max_forwards==0, or excessively long requests
    if (!mf_process_maxfwd_header("10")) {
            sl_send_reply("483","Too Many Hops");
            break;
    };
    if ( msg:len > max_len ) {
            sl_send_reply("513", "Message too big");
            break;
    };

    # we record-route all messages -- to make sure that
    # subsequent messages will go through our proxy; that's
    # particularly good if upstream and downstream entities
    # use different transport protocol
    record_route();
    # loose-route processing
    if (loose_route()) {
            t_relay();
            break;
    };

    # if the request is for other domain use UsrLoc
    # (in case, it does not work, use the following command
    # with proper names and addresses in it)
    if (uri==myself) {

            if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication if (!radius_www_authorize("")) { www_challenge("", "1"); break; };

                    save("location");
                    break;
            };

            # native SIP destinations are handled using our USRLOC

DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); };

}

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

-- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers