2 Sep
2003
2 Sep
'03
7:33 a.m.
On Sep 02, 2003 at 18:15, Kelvin Chua <kchua(a)up.edu.ph> wrote:
hi!
how do you tell ser.cfg that the transport should be tcp or udp?
for example, is there such a thing as t_relay_to_udp("host2","port2")
Yes, there is: t_relay_to_udp. t_relay_to_tcp, t_relay_udp, t_relay_tcp,
t_replicate_udp, t_replicate_tcp. For stateless forwarding: forward_tcp,
forward_udp. Note however that stateless tcp to udp forwarding is not
recommended (you won't have any udp retransmissions => loss of
reliability).
You should also always record route (ser should always be in the path to
"forward" between the different protocols).
BTW: all the stuff above is supported only by the latest release
(0.8.11).
where the transport which will be used with host2 is
udp. i noticed that
when a client uses udp in a particular call leg, ser also uses udp for the other leg.
Yes, ser will try to keep the same transport by default (unless
a special *_{tcp,udp} script function is used, or the transport is
specified in the uri).
Andrei