Both stable and unstable release have the serctl command. There is nothing to do with rpm. You can insert the domain records into mysql directly if that's what you want. However, to get SER authenticate domain, you need:
modparam("usrloc", "use_domain", 1) modparam("registrar", "use_domain", 1)
Zeus
-----Original Message----- From: gaillac harry [mailto:gaillacharry@yahoo.fr] Sent: Tuesday, 20 April 2004 9:43 PM To: Zeus Ng Subject: RE: [Serusers] multiple domains
Hi,
I don't use "serctl domain add" because of I can't build rpm with instable SER release from CVS so I use SER-0.8.12 stable. I can't configure the last serweb release from CVS ( I waste much time). here is my ser.cfg
# ----------- global configuration parameters ------------------------
#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode debug=7 fork=yes log_stderror=yes */
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 #listen=192.168.0.1 children=4 fifo="/tmp/ser_fifo" fifo_mode=0666 #alias="example.com" # ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so"
loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/domain.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/msilo.so"
# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("usrloc", "db_mode", 2)
# -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password")
# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # --domain module-- modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("domain", "db_mode", 1) modparam("domain", "domain_table", "domain") modparam("domain", "domain_col", "domain") # --msilo params-- modparam("msilo", "registrar", "sip:registrar@example.com") modparam("msilo", "db_url", "sql://ser:heslo@localhost/ser") # ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; };
# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (is_from_local()) {
if (method=="REGISTER") {# Uncomment this if you want to use digest authentication if (!www_authorize("", "subscriber")) { www_challenge("", "0"); break; };
save("location"); m_dump(); break; }; # native SIP destinations are handled using ourUSRLOC DB lookup("aliases"); if (!lookup("location")) { if (method == "MESSAGE") { if (!t_newtran()) { sl_reply_error(); break; }; }; if (m_store("0")) { t_reply("202", "Accepted for Later Delivery"); break; };
t_reply("503", "Service Unavailable"); break; };}; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); };
}
Le mar 20/04/2004 à 13:16, Zeus Ng a écrit :
First, make sure you have support.example.com and
example.com in your
domain table. Use
serctl domain add example.com serctl domain add support.example.com
Second, depending on the version of SER you are using, you may need some or all of the following.
modparam("usrloc", "use_domain", 1) modparam("registrar", "use_domain", 1)
Zeus
-----Original Message----- From: serusers-bounces@lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of gaillac harry Sent: Tuesday, 20 April 2004 7:31 PM To: serusers@lists.iptel.org Subject: [Serusers] multiple domains
Hi all,
here is my problem when i use serctl to add a account the domain name is extract from email address and insert to domain field of subscriber table. I added two domains (support.example.com and example.com) but if i use digest authentication (!www...) the client send is domain and SER look at its subscriber domain field so it's right for example.com's clients.
I have to change domain name in subscriber table for all support.example.com's clients or don't use digest authentication!
May I use one SERWEB per domain ?
is it possible to avoid changing domain field of subscriber table for accounts of others domains?
What about dns srv may I have to add srv recording for each domain or using outbound proxy?
Regards Harry