19 Mar
2007
19 Mar
'07
3:08 p.m.
Hi Michel,
As I mentioned to you before, the answer is inside rfc3327.
Check if the registrar that you are using has support for it.
Regards,
Ovidiu Sas
On 3/19/07, Michel Bensoussan <michel(a)extricom.com> wrote:
Hello
I don't want the openser to register itself. The UA can register to any
server. I just want to be sure that ALL SIP messages will path through
the openser. For outgoing call and for incoming call. That's all. But I
don't know how config the openser.
On my SIP phone I defined openser as outbound proxy and as proxy server.
For Registrar I defined another server.
For outgoing calls there is no problem. The phone sends INVITE to
openser and openser forwards the message.
The problem is for incoming call. The INVITE message is sent directly to
the phone and the openser doesn't know about it.
How can I ensure that all incoming call will pass through openser?
If I define the openser as registrar server, how a remote phone will
found my sip phone?
I start with the following configuration: there is already a sip server
(anyone) and several sip phones. I just want the openser to be in the
middle. Between the sip phones and the already existing server. And I
want outgoing and incoming call to pass through the openser.
How can I config that?
Thanks.
Regards,
Michel.
Daniel-Constantin Mierla wrote:
Hello,
openser cannot register itself to fwd (or other proxy) in behalf of
users. you can use sipsak/sipp kind of tools to register contacts to
fwd, and uac module to be able to authenticate for calls.
Cheers,
Daniel
On 03/18/07 18:08, Michel Bensoussan wrote:
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
Hi Ravi
If you can help it will be great because I'm a little bit lost.
What I need is to set the OpenSER proxy between a User Agent and FWD
(or any other SIP Server/Registrar). I want the UA to register to the
OpenSER and the OpenSER to register the UA to the FWD. In this case,
all SIP message to the UA will pass through the OpenSER.
Thank you.
Regards,
Michel.
raviprakash sunkara wrote:
Hi Michel
Yes , U can forword the call of outgoing through openSER
Here, means, U need to forward the call to asterisk 's or pstn gateways
In openSER when the call invites to the callee , at that time u
use the avpops modules ,
If you wants I can do it for U...... a part time i can do for U.
On 3/18/07, *Michel Bensoussan* < michel(a)extricom.com
<mailto:michel@extricom.com>> wrote:
Hello.
How can I configure OpenSER to outgoing all call to FWD and more
important to ensure that all INCOMING call will go through OpenSER?
Thanks.
Regards,
Michel.
_______________________________________________
Users mailing list
Users(a)openser.org <mailto:Users@openser.org>
http://openser.org/cgi-bin/mailman/listinfo/users
--
Thanks and Regards
Ravi Prakash Sunkara
ravi.sunkara(a)hyperion-tech.com <mailto:ravi.sunkara@hyperion-tech.com>
M:+91 9985077535
www.hyperion-tech.com <http://www.hyperion-tech.com>
Client and Parent company :- www.august-networks.com
<http://www.august-networks.com>
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users