[Serusers] Doubt on Radius

Hi, I have installed ser-0.8.11, FreeRADIUS-0.9.0, radiusclient-0.3.2. I can register two useragents(Kphone) to ser with default authorization ( www_authorize())via mysql database. But when I use radius_www_authorize(),the useragent(Kphone)dostnot get authorized. What I have to do further to get radius authentication. Please help me Thanks in advance Regards Xten_india. I get the following message in radius.log file. ------------------------------------------------ Sat Sep 13 13:29:48 2003 : Info: Listening on IP address 192.168.100.101, ports 1812/udp and 1813/udp, with proxy on 1814/udp. Sat Sep 13 13:29:48 2003 : Info: Ready to process requests. Sat Sep 13 13:30:04 2003 : Error: rlm_eap: EAP-Message not found Sat Sep 13 13:30:04 2003 : Auth: Login OK: [root/support] (from client ser port 1645) -------------------------------------------------- My configuration file is # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/exec.so" loadmodule "/usr/local/lib/ser/modules/textops.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 1) # -- auth params -- # Uncomment if you are using auth module # loadmodule "/usr/local/lib/ser/modules/auth_radius.so" modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf") modparam("auth_db", "db_url","sql://root:support@localhost/radius") modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("acc", "log_level", 1) #modparam("acc", "radius_flag", 1) modparam("acc", "log_flag", 1) modparam("auth_radius", "service_type", 15) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) # if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!radius_www_authorize("localdomain.com")) { www_challenge("localdomain.com", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; # }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } --------------------------------- Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software